Scribd
Upload
368 views7 pages

Ford Reset Tool U-13-M2 User's Guide

Locker 13

Uploaded by

MPlesa
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
368 views7 pages

Ford Reset Tool U-13-M2 User's Guide

Locker 13

Uploaded by

MPlesa
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 7

FORD RESET TOOL U-13-M2 Rev.3.

FORD RESET TOOL U-13-M2


User’s Guide

© Microcontroller-café & Checkpoint LAB FORD RESET TOOL U-13-M2

1
Introduction
The U-13-M2 Ford Traffic 3000/4000 tool designed for automatic unlocking
the Ford Traffic 3000/4000 with IIC service interface. The Ford Reset tool
U-13-M2 will reset car radio to the “CODE----“ prompt when the car radio is
displaying “LOCKED 10” or “LOCKED 13” message

Figure 1

• NOTE* Model 3000 TRAFFIC. Made by VISTEON PART NO :


2T1F-18C838C0. MCU - ST92F120V9Q7
*One more front panel Ford 3000 see Figure 10

Hardware Description
U-13-M2 components:

Power Power
INLET OUTLET

To target IIC
INTERFACE

Figure 2

© Microcontroller-café & Checkpoint LAB FORD RESET TOOL U-13-M2

2
INLET : Input power supply source connector
+13.8…15 V positive voltage to U-13-M2

OUTLET : Output power supply source connector


supply +12 V positive to car radio Ford Traffic 3000

INTERFACE: IIC bus service connector - 3 wires interface

Activity LED (Green) Service LED (Red)


Power
supply to
car radio

From external
power supply
source ~ 1A

SCL
SDA
ST_RST
GND

STR button ARST button

Figure 3

U-13-M2 kit included two LEDs (green and red), two push button
switches, two power connectors, one service interface connector

Control components meaning:

Activity LED…….. Ready/Activity LED is lit/blinking displays operations


in progress or when it’s finished. GREEN colour

Service LED……… Service LED is lit/blinking displays operation in


progress or when it’s finished. In additional displays service modes after
entering service mode**. RED colour
• NOTE ** Service mode is designed for self testing U-13-M2

STR button……….. START BUTTON starts the target car radio receive
service sequence

ARST button…….. AVR RESET button resets the main AVR device
when pushed

© Microcontroller-café & Checkpoint LAB FORD RESET TOOL U-13-M2

3
Installing Hardware
Connection diagram for resetting locked 10/13 Ford Traffic 3000:

Figure 4

Figure 5

© Microcontroller-café & Checkpoint LAB FORD RESET TOOL U-13-M2

4
Operation
Step 1: Connect power supply source, U-13-M2 tool and target radio
with accordance to Figure 4 and Figure 5

Step 2: Turn ON power supply source (set DC voltage 13.8-14 volts).


Wait ~3-4 seconds for settle time. Activity LED will lit green after
simultaneously blinking with Service LED for a little while.
From now you should see message in the display “LOCKED 13”

Step 3: Press STR button. Service LED will blink 9 times then
Activity and Service LEDs become flashing first one by second one

Step 4: Make sure, that car radio display “CODE - - -” in the LCD display

WARNING!

ONCE UNLOCKED, the radio will permit a further 13


attempts for code entering, but when second 13_th
attempts is used the radio will display “LOCK FOREVER”
and can never be unlocked next time

BEFORE &

Figure 6

AFTER 

Figure 7

© Microcontroller-café & Checkpoint LAB FORD RESET TOOL U-13-M2

5
Appendix
Direct connection to the target MCU - ST92F120V9Q7

Figure 9

One more front panel view of Ford Traffic 3000:

Figure 10

© Microcontroller-café & Checkpoint LAB FORD RESET TOOL U-13-M2

6
FORD RESET TOOL U-13-M2

PACKAGE CHECK LIST Q.


-------------------------------------------------------------------

1. U-13-M2 board . . . . . . 1
2. IIC interface cable. . . . . . 1
3. User’s manual (hardcopy). . . . . 1

© Microcontroller-café & Checkpoint LAB FORD RESET TOOL U-13-M2

You might also like