Jointech Training
Jointech Training
Gavin
Jointech 1
Intelligent Hardware
GPS Electronic Lock
RFID GPS E-lock JT701 Keyboard GPS E-lock JT702 Bluetooth Security Padlock JT705 Disposable E-seal tracker JT707
Container Tracker
JT704 JT706
Jointech 2
E-lock Working Process
Unlock option:
On site: Authorized RFID card
Remote: Password from SMS, software, App
Unlock Process:
● Authorize the RFID cards / Set new password
● Lock the container and start trip
● Unlock with authorized RFID cards/mobile app/browser software.
Magnet base
Jointech 4
Basic Configuration
Configuration: Configure software / SMS
Jointech 5
Intelligent GPS E-lock
1. Get the device Online: IP, Port, APN
2. Report interval: 1 data/minute in tracking mode, 7 days; 1 data per hour, >90 days.
3-axis accelerometer for vibration detection, interval at motion and stationary (RTC).
The time difference is the difference between local time and Greenwich time.
E.g UTC+8, so time difference is 480 value: from -720 to 780
Jointech 6
Intelligent GPS E-lock
4. Unlock & Change the password:
Jointech 7
Intelligent GPS E-lock
6. Alarm Setting: GPRS / SMS
7. Geo-fence Setting:
Jointech 8
Firmware Upgrade
upgrade software OTA
Jointech 9
Installation
Adjustable cable, flexible locking, loop for cargo
Jointech 10
Keyboard GPS E-lock JT702
Unlock option:
On site: fixed password /
dynamic password (Via GPRS/Bluetooth)
Keep the driver away from fraud
Remote: Password from SMS, software, App
Unlock Process:
● In each locking, the new password will be generated randamly and sent
to the center.
● Lock the container and monitor the trip
● Authorized person get access to the system, and acquire the new
password to unlock.
Jointech 11
Security GPS E-lock JT705
Unlock option:
On site: Password from APP, via Bluetooth
Remote: Password from SMS, software, mobile APP
Unlock Process:
● In each locking, the new password will be generated randomly
and sent to the center.
● Lock the container and monitor the trip
● Authorized person get access to the system, open directly, or
acquire the new password to unlock.
Gesture monitor:
Lock gesture can detect if the door is removed directly, tilt,
roll over, harsh brake, impact, etc.
Jointech 12
Disposable E-lock JT707
Unlock option:
On site: cut cable
Alarm will be triggered with time/GPS location.
Working Process:
1. activated by lock cable, report in preset time.
2. Cut the cable at destination, alarm triggered.
3. Repeated use by changing the cable, till battery used up.
Jointech 13
Container Tracker
Jointech 14
Thank You !
SHENZHEN JOINT TECHNOLOGY CO.,LTD
Contact: Gavin Deng
Email: [email protected]
Web: www.jointcontrols.com
Add: 2nd F/L, Bldg 2, Tinwei business park, 2nd Liuxian Road,