Scribd
Upload
78 views

One Way Slab

This document summarizes the design of a simply supported concrete slab. The slab has a thickness of 500 mm, span length of 5.7 m, and is designed to support a total ultimate load of 68.4 kN/m^2. Reinforcement requirements are calculated and main reinforcement of 12 mm bars at 100 mm spacing is determined to be adequate with an provided area of 2432 mm^2 exceeding the required area of 2392 mm^2. Deflection is also calculated to be 3.2 mm, less than the allowable deflection of 23.75 mm. No compression reinforcement is required.

Uploaded by

Jane Ro
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
78 views

One Way Slab

This document summarizes the design of a simply supported concrete slab. The slab has a thickness of 500 mm, span length of 5.7 m, and is designed to support a total ultimate load of 68.4 kN/m^2. Reinforcement requirements are calculated and main reinforcement of 12 mm bars at 100 mm spacing is determined to be adequate with an provided area of 2432 mm^2 exceeding the required area of 2392 mm^2. Deflection is also calculated to be 3.2 mm, less than the allowable deflection of 23.75 mm. No compression reinforcement is required.

Uploaded by

Jane Ro
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 9

Page of

Your Logo Design by :


Date : 14-Feb-2019
Project : Name Checked by :
Subject : Design of Simply Supported Slab Date :

Slab Identity :
Wu
Concrete fc' = 28 MPa
Steel fy = 276 MPa
Concrete Unit Wt. gc = 24.00 kN/m3 L
Span Length L = 5.70 m
Min. Reqd. Th. tmin = 285.00 mm [ACI 318M-05, Table 9.5(a)]- Span Length / 20
Thickness Used h = 500 mm OK
Width b = 2150 mm
Clear cover to main
c = 20 mm
steel

Super Imposed Dead Load


-Finishes + MEP wF = 37.00 kN/m2
-Partitions wP = 0.00 kN/m2

Live load wL = 6.00 kN/m2

Loadings
Self weight ( gc* h/1000 ) = 12.000 kN/m2

Total Dead Load wD = 49.00 kN/m2

Total ult (1.2wD+1.6wL) [ACI 318M-05,9.2.1]


wu = 68.40 kN/m2
Design for flexure
Main Steel
Mu = Wu *L2 / 8 = 277.790 kN-m/m .

Effective depth d = 474 mm ( h - c - 0.5 * f )


Steel Ratio rreqd. = 0.235 %
Reqd. Area of Steel Astreqd = 2392 mm2/m 0.85* fc '  2 * Mult *106 

rreq  * 1 1
Bar Diameter f = 12 Fy  0.9 * 0.85 * f '*b * d 2 
 c 
Required Spacing S = 100 mm

Temperature Steel

Reqd. Reinf. Ratio = 0.20% [ACI 318M-05, 7.12.2.1]


Reqd. Area of Steel At = 2150 mm2/m
Bar Diameter ft = 12
Required Spacing S = 110 mm

Summary

Bottom steel : f 12 @ 100 mm c/c , Ast prov. = 2432 > 2392

file:///conversion/tmp/scratch/409262218.xls
Main Direction OK
Temperature steel : f 12 @ 100 mm c/c , Ast prov. = 2432 > 2150
Transverse Direction OK

file:///conversion/tmp/scratch/409262218.xls
Page of
Design by :
Date : 14-Feb-2019
Project : Name Checked by :
Subject : Design of Simply Supported Slab Date :

Deflection
b

k d
nAs

Gross moment of Inertia Ig = b * h3 / 12 = 2.240E-02 m4


n = Es / E c = 8.042
B = b / (n * As) = 0.110
k = [√(2*d*B+1)-1]/B = 84.20 mm
Ec = 4700 * √fc' * 1000 = 24870062 kN/m2

Inertia of cracked section Icr = b*k3/3 + n*As*(d-k)2 = 3.40E-03 m4

Modulus of rupture fr = 0.62 * √fc' = 3.28 MPa


Cracking moment Mcr = fr * 10 * Ig / (h/2)
6
= 293.90 kN-m
Max. Moments Ma = WL+D*L2/8 = 223.37 kN-m

Mc/a = Mcr / Ma = 1.32

Effective M. of Inertia Ie = Mc/a3*Ig+[1-Mc/a3]*Icr = 2.24E-02 m4


For the above equations refer to ACI 318M-05, 9.5.2.3

Instantaneous Deflection * * * Excluding self weight * * *

Deflection S.D.L. (UDL) Δ1w = 5 * WF+P*L4 / (384*Ec*Ie) = 9.13E-04 m = 0.91 mm


Deflection LL (UDL) Δ2w = 5 * WL*L / (384*Ec*Ie)
4
= 1.48E-04 m = 0.15 mm

Total Instantaneous Deflection = 0.91 + 0.15 = 1.06 mm

Long time Deflection

Period 5 years and more r' = 0.0026 ( Compression steel assumed zero )
Time-dependent factor x = 2
Multiplication factor l = 1.77 [ACI 318M-05, 9.5.2.5]

Deflection S.D.L.+S.W.(UDL) ΔWSS= 5 * WD*L4 / (384*Ec*Ie) = 1.21E-03 m = 1.21 mm

Long Time Deflection = l * ΔWSS = 2.14 mm

Total Deflection (mm)

ΔTotal = 1.06 + 2.14 = 3.20 mm


ΔTotal = 3.20 mm < Δ Allowable = L * 1000 / 240 = 23.75 mm
OK
Page of
Design by :
Date : 14-Feb-2019
Project : Checked by :
Subject : Date :

Checking if section need compression steel

f = 0.9
fc' = 28 MPa
fy = 276 MPa

bt = 0.85
b = 2150 mm
d = 474 mm

rmax = 0.85 * (3/7) * (fc'/Fy) * bt = 0.03141

fMn = 3082.72 kN-m > Mult = 277.79 kN-m

No need for compression steel .


Page of
Design by :
Date : 14-Feb-2019
Project : Checked by :
Subject : Date :

Rho Max

0.003

max
C
d

0.004

0.003 0.004
Cmax = d - Cmax

0.003
Cmax = * (d - Cmax)
0.004

Cmax = 0.75 d - 0.75 Cmax

Cmax = 3/7 d

A s Fy = 0.85 * fc' * b * amax

A s Fy = 0.85 * fc' * b * bt * (3/7)*d

As
= 0.85 * (3/7) * (fc'/Fy) * bt
b*d

As = 0.85 * b * d (3/7) * (fc'/Fy) * bt


Diameter Area
#6 6 28.3
#8 8 50.3
# 10 10 78.5
# 12 12 113
# 14 14 154
# 16 16 201
# 20 20 314
# 25 25 491
# 28 28 616
# 32 32 801
# 40 40 1256

You might also like