Scribd
Upload
196 views1 page

Bauder - InvertedRoofHotmelt - Bakor JVPM JFRI200 AP1 Bakor BL PDF

This document summarizes the Bauder Bakor hot melt inverted roof system. It is a hot liquid applied roof waterproofing system suitable for new construction and refurbishment projects, especially on concrete decks. The system uses a hot melt structural waterproofing membrane fully bonded to insulation and protective layers. It provides fall protection for roof surfaces like plazas, podiums, and car parks. The system buildup and options including different insulation thicknesses and coatings are described.

Uploaded by

daminda
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
196 views1 page

Bauder - InvertedRoofHotmelt - Bakor JVPM JFRI200 AP1 Bakor BL PDF

This document summarizes the Bauder Bakor hot melt inverted roof system. It is a hot liquid applied roof waterproofing system suitable for new construction and refurbishment projects, especially on concrete decks. The system uses a hot melt structural waterproofing membrane fully bonded to insulation and protective layers. It provides fall protection for roof surfaces like plazas, podiums, and car parks. The system buildup and options including different insulation thicknesses and coatings are described.

Uploaded by

daminda
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Revision: April 2018

SYSTEM SUMMARY Bauder Bakor Hot Melt System


Reinforced bitumen membrane inverted roof covering system

Hot liquid applied, inverted, hot melt structural waterproofing roof system suitable for new build, refurbishment and intensive
green roof applications, and used primarily on concrete decks. Ideal as waterproofing beneath most protected roofs such as
paved, podium, plazas, ballasted and car park surfaces.

Product Description thickness weight


Installed to achieve a permanent mini-
1 Ballast or Project Project
mum load of 80Kg/m², to anchor the
vegetation insulation in high winds / heavy rainfall. specific specific

Designed to increase the thermal


2 JFRI VPM 0.45mm 0.1Kg/m²
capacity of the insulation.

High performance rigid expanded poly-


3 JFRI 200 styrene insulation; lightweight, high
200mm 8Kg/m²
Insulation compressive strength; resistant to
water; will not degrade.
Access coating bitumen membrane with
4 AP1 Coating
60g/m2 glass tissue reinforcement; fully
Access 1.5mm 1.8Kg/m²
bonded into the uppermost layer of the
Sheet
790-11
5 790-11 Hot applied, rubberised bitumen with
Hot Melt reinforcement layer for a monolithic 6.2mm 6.5Kg/m²
Waterproofing fully bonded system.

Waterproofing System Build up (excludes ballast) 208.15mm 16.4Kg/m²

SYSTEM OPTIONS

COATING PROTECTION INSULATIONS BauderJFRI 200 BauderJFRI BauderJRFI 200 HP


SHEETS (EPS) 300 (EPS)
(EPS)

THICKNESSES Approx ‘U’ VALUE THICKNESSES Approx ‘U’ VALUE


AP1
(mm) (W/m²K) (mm)
(W/m²K)
1.5mm, 1.8Kg/m²
assuming concrete, metal or
assuming concrete, metal or
plywood deck
plywood deck
AP2
Root resistant
200 0.18 0.18 185 0.18
4.2mm, 5.0Kg/m²
240 0.15 0.15 220 0.15

360 0.10 0.10 325 0.10


(in two layers) (in two layers)

UNITED KINGDOM IRELAND


Bauder Ltd Bauder Ltd
70 Landseer Road, Ipswich, Suffolk IP3 0DH O’Duffy Centre, Carrickmacross, Co. Monaghan
T: +44 (0)1473 257671 E: [email protected] T: +353 (0)42 9692 333 E: [email protected]
bauder.co.uk bauder.ie

You might also like