List of PDMS SKEY (Symbol Key)

Below is the list of symbol key (SKEY) that is used in paragon so that your component can be viewed in
isodraft. If the 4th column of the list above indicated as YES, then the SKEY can be used as the base skey for
creating new skey. Note also that the ** mark in the first column can be changed based on its end
connection.Replace the ** characters in the symbol key with one of the following end condition identifiers:

BW for butt weld

USER SPINDLE
SKEY GTYPE COMPONENT
DEFINABLE? TYPE
FLOR ATTA Floor Penetration Type ATTA Yes
BEFL BEND Flanged Bend No
BTFL BEND Flanged Bend with Tee No
BU+D BEND Pulled Return Bend No
BUFL BEND Flanged Return Bend No
L@BW BEND Butt Weld Lobster Back Bend No
L@FL BEND Flanged Lobster Back Bend No
MIBW BEND Butt Weld Mitred Bend No
MIFL BEND Flanged Mitred Bend No
MTBW BEND Butt Weld Mitred Bend with Tee No
MTFL BEND Flanged Mitred Bend with Tee No
PB+D BEND Pulled Bend No
T@BW BEND Butt Weld Lobster Back Bend with Tee No
T@FL BEND Flanged Lobster Back Bend with Tee No
TB+D BEND Pulled Bend with Tee No
KABW CAP Butt Weld Cap Yes
KACP CAP Compression Fitting Cap Yes
KASC CAP Screwed Fitting Cap Yes
KASW CAP Socket Weld Cap Yes
PF CLOS Fixed Length Pipe Block Yes
PV CLOS Variable Length Pipe Block Yes
CEBW COUP Butt Weld Elbolet Yes
CESC COUP Screwed Fitting Elbolet Yes
CESW COUP Socket Weld Elbolet Yes
COCP COUP Compression Fitting Coupling Yes
COSC COUP Screwed Fitting Coupling Yes
COSW COUP Socket Weld Coupling Yes
NBSC COUP Screwed Nipple Yes
NRSC COUP Screwed Fitting Nipple Yes
CRBW CROS Butt Weld Cross No
CRCP CROS Compression Fitting Cross No
CRFL CROS Flanged Cross No
CRRF CROS Set On Reinforced Cross No
 USER SPINDLE
SKEY GTYPE COMPONENT
DEFINABLE? TYPE
CRSC CROS Screwed Fitting Cross No
CRSO CROS Set On Cross No
CRSW CROS Socket Weld Cross No
Generic Y-type Cross with user- definable out- and off-
X@** CROS Yes
legs
EBSC ELBO Screwed Fitting (Male) Elbow No
ELBW ELBO Butt Weld Elbow No
ELCP ELBO Compression Fitting Elbow No
ELSC ELBO Screwed Fitting Elbow No
ELSW ELBO Socket Weld Elbow No
ER** ELBO Reducing Elbow No
ETBW ELBO Butt Weld Elbow with Tee No
ETCP ELBO Compression Fitting Elbow with Tee No
ETSC ELBO Screwed Fitting Elbow with Tee No
ETSW ELBO Socket Weld Elbow with Tee No
EUBW ELBO Butt Weld Return Elbow No
FLBL FBLI Blind or Blanking Flange Yes
FLRC FBLI Reducing Flange Yes
FLRE FBLI Eccentric Reducing Flange Yes
FA** FILT Angled Filter No
FI** FILT Straight-Through (In-Line) Filter Yes
FO** FILT Offset Filter Yes
FY** FILT ‘Y’-type Filter/Strainer Yes
FR** FILT Return Filter No
FLBL FLAN Blind or Blanking Flange Yes
FLFL FLAN Flared Flange Yes
FLLB FLAN Loose Backing Flange Yes
FLRC FLAN Reducing Flange Yes
FLRE FLAN Eccentric Reducing Flange Yes
FLSC FLAN Screwed Fitting Flange Yes
FLSJ FLAN Slip-on J-Type Welded Flange Yes
FLSW FLAN Socket Weld Flange Yes
FLSO FLAN Slip-on Flange Yes
FLWN FLAN Weld Neck Flange Yes
FOSO FLAN Slip-on Flange with Orifice Yes
FOWN FLAN Weld Neck Flange with Orifice Yes
FPFL FTUB Fixed Length Pipe with Flanged Ends No
FPPL FTUB Fixed Length Pipe with Plain Ends Yes
C3** INST 3-Way Control Valve No 13SP
C4** INST 4-Way Control Valve No 13SP
CA** INST Angled Control Valve Yes 13SP
CV** INST Control Valve Yes 13SP
DR INST Rupture Disc Yes
H3** INST 3-Way Control Valve No 12SP
H4** INST 4-Way Control Valve No 12SP
HA** INST Angled Control Valve Yes 12SP
HV** INST Control Valve Yes 12SP
 USER SPINDLE
SKEY GTYPE COMPONENT
DEFINABLE? TYPE
IA** INST Angled Instrument Yes
IDFL INST Flanged Instrument with Dial No
IDPL INST Instrument with Dial No
II** INST Instrument Yes
IO** INST Offset Instrument Yes
IR** INST Return Instrument No
M3** INST 3-Way Motorised Valve No 11SP
M4** INST 4-Way Motorised Valve No
MA** INST Angled Control Valve Yes 11SP
MV** INST Motorised Valve Yes 11SP
OP INST Orifice Plate Yes
PR INST Restrictor Plate Yes
RA** INST Angled Relief Valve Yes 02SP
RV** INST Relief Valve Yes
S3** INST 3-Way Control Valve with Square Indicator No 10SP
S4** INST 4-Way Control Valve with Square Indicator No 10SP
SA** INST Angled Control Valve with Square Indicator Yes 10SP
SV** INST Control Valve with Square Indicator Yes 10SP
XA** INST Angled Pressure Reducing Valve Yes 09SP
XV** INST Pressure Reducing Valve Yes 09SP
FLRG LJSE Lap Joint Ring No
FLSE LJSE Lap Joint Stub End No
HC** OLET Screwed Half Coupling Yes
HC** OLET Socket Weld Half Coupling Yes
ITFL OLET Flanged Instrument Tee No
LA** OLET Butt Weld Latrolet Yes
LA** OLET Screwed Fitting Latrolet Yes
LA** OLET Socket Weld Latrolet Yes
NI** OLET Plain End Nipolet Yes
NI** OLET Screwed Fitting Nipolet Yes
SK** OLET Socket Weld Sockolet Yes
SW** OLET Butt Weld Sweepolet Yes
TH** OLET Screwed Fitting Thredolet Yes
WTBW OLET Butt Weld Weldolet Yes
BA** PCOM Angle Block No
BO** PCOM Offset Block Yes
BR** PCOM Return Block No
CH** PCOM Hose Coupling Yes
EX** PCOM Expansion Bellows Yes
FT** PCOM Flame Trap Yes
FX** PCOM Flexible Hose Yes
NC** PCOM Non-Category Item Yes
PL PCOM Plug Yes
RP PCOM Restrictor Plate Yes
SB PCOM Spectacle Blind Yes
SG** PCOM Sight Glass Yes
SP PCOM Slip Plate Yes
 USER SPINDLE
SKEY GTYPE COMPONENT
DEFINABLE? TYPE
SR PCOM Slip Ring Yes
TU** PCOM Tundish or Funnel Yes
UNIV PCOM Universal Skey for special fittings
CPBW REDU Butt Weld Concentric Reducer Yes
CPFL REDU Flanged Concentric Reducer Yes
CSBW REDU Butt Weld Concentric Reducer Yes
CSFL REDU Flanged Concentric Reducer Yes
CTBW REDU Butt Weld Concentric Reducer with Tee Yes
CTFL REDU Flanged Concentric Reducer with Tee Yes
CTSC REDU Screwed Fitting Concentric with Tee Yes
CTSW REDU Socket Weld Concentric Reducer with Tee Yes
CXBW REDU Butt Weld Concentric Reducer with Tee Yes
CXFL REDU Flanged Concentric Reducer with Tee Yes
CZBW REDU Butt Weld Concentric Reducer with Tee Yes
CZFL REDU Flanged Concentric Reducer with Tee Yes
EPBW REDU Butt Weld Eccentric Reducer Yes
EPFL REDU Flanged Eccentric Reducer Yes
ESBW REDU Butt Weld Eccentric Reducer Yes
ESFL REDU Flanged Eccentric Reducer Yes
EXBW REDU Butt Weld Eccentric Reducer with Tee Yes
EXFL REDU Flanged Eccentric Reducer with Tee Yes
EZBW REDU Butt Weld Eccentric Reducer with Tee Yes
EZFL REDU Flanged Eccentric Reducer with Tee Yes
OTBW REDU Butt Weld Eccentric Reducer with Tee Yes
OTFL REDU Flanged Eccentric Reducer with Tee Yes
OTSC REDU Screwed Fitting Eccentric Reducer with Tee Yes
RBSC REDU Screwed Fitting Concentric Reducing Bush Yes
RBSW REDU Socket Weld Concentric Reducing Bush Yes
RCBW REDU Butt Weld Concentric Reducer Yes
RCCP REDU Compression Fitting Concentric Reducer Yes
RCFL REDU Flanged Concentric Reducer Yes
RCSC REDU Screwed Fitting Concentric Reducer Yes
RCSW REDU Socket Weld Concentric Reducer Yes
REBW REDU Butt Weld Eccentric Reducer Yes
REFL REDU Flanged Eccentric Reducer Yes
RESC REDU Screwed Fitting Eccentric Reducer Yes
RF REDU Special Reducing Flange Yes
RNSC REDU Nipple Fitting Concentric Reducer Yes
NC** SHU Non-Category Item Yes
TEBW TEE Butt Weld Tee No
TECP TEE Compression Fitting Tee No
TEFL TEE Flanged Tee No
TESC TEE Screwed Fitting Tee No
TESO TEE Set On Tee No
TERF TEE Reinforced Tee No
TESW TEE Socket Weld Tee No
TPUL TEE Pulled Tee No
 USER SPINDLE
SKEY GTYPE COMPONENT
DEFINABLE? TYPE
TSBW TEE Butt Weld Swept Tee No
TSCP TEE Compression Fitting Swept Tee No
TSFL TEE Flanged Swept Tee No
TSSW TEE Socket Weld Swept Tee No
Generic Y-type Tee with user- definable out- and off-
Y@** TEE Yes
legs
TA** TRAP Angled Trap No
TI** TRAP In-line Trap Yes
TO** TRAP Offset Trap Yes
TR** TRAP Return Trap No
UNSC UNIO Screwed Fitting Union Yes
UNSW UNIO Socket Weld Union Yes
UNBW UNIO Butt Weld Union Yes
AR** VALV Angled Pressure Reducing Valve Yes 09SP
AV** VALV Angled Valve Yes 01SP
AX** VALV Angled Relief Valve or Vent Yes 02SP
CK** VALV Check Valve Yes
VB** VALV Ball Valve Yes 03SP
VC** VALV Check Valve Yes
VD** VALV Diaphragm Valve Yes 01SP
VG** VALV Globe Valve Yes 01SP
VK** VALV Cock Valve Yes 03SP
VN** VALV Needle Valve Yes 06SP
VP** VALV Plug Valve Yes 07SP
VR** VALV Relief Valve Yes 02SP
VS** VALV Slide Valve Yes 08SP
VT** VALV Gate Valve Yes 05SP
VV** VALV Basic Valve Yes 01SP
VX** VALV Pressure Reducing Valve Yes 09SP
VY** VALV Butterfly Valve Yes 03SP
RD VENT Rupture Disc Yes
V4** VFWA 4-Way Valve No 01SP
V3** VTWA 3-Way Valve No 01SP
WF WELD Field Fitted Weld No
WS WELD Site Weld No
WW WELD Shop Weld No
FLOW Flow Arrow Yes
Hanger (As a basis for user- defined hangers; see
01HG ISODRAFT User Guide, Section 10.4, Defining a New Yes
Hanger)