Scribd
Upload
138 views

Formule Rezi

1) The document defines various equations related to stress, strain, deformation, moments of inertia, shear stress, and section modulus for different shapes including rectangular, circular, and tube shapes. 2) Equations are provided for Hooke's law, Poisson's ratio, elastic deformation, nominal stress, stress concentration, thermal deformation, shear stress, shear strain, Young's modulus, and Navier's formula. 3) Formulas define principal moments of inertia, maximum shear stress, slope deflection, section modulus, and shear stress using Jouraski's formula for different cross sectional shapes.

Uploaded by

Horatiu Har
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
138 views

Formule Rezi

1) The document defines various equations related to stress, strain, deformation, moments of inertia, shear stress, and section modulus for different shapes including rectangular, circular, and tube shapes. 2) Equations are provided for Hooke's law, Poisson's ratio, elastic deformation, nominal stress, stress concentration, thermal deformation, shear stress, shear strain, Young's modulus, and Navier's formula. 3) Formulas define principal moments of inertia, maximum shear stress, slope deflection, section modulus, and shear stress using Jouraski's formula for different cross sectional shapes.

Uploaded by

Horatiu Har
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
You are on page 1/ 1

∆𝑙 𝑏ℎ 3 4𝑇

= 𝜀 – strain (def. specifica) 𝐼𝑧 = – principal moment of inertia 𝜏𝑚𝑎𝑥 = 3 𝐴 – tangential stress for
𝑙 12

𝜀𝑡 with respect to z axis rectangular rectangular bar


𝜐=− – Poisson rate shape
𝜀𝑙
𝑀𝑡
𝑏3 ℎ 𝜏= 𝐼𝑝
𝑟 – shear stress for torsion
𝐹 𝐼𝑦 = – principal moment of inertia
𝜎= = 𝐸 ∙ 𝜀 –Hooke’s Law 12
𝑆0
with respect to y axis rectangular 𝑀
𝜏𝑚𝑎𝑥 = 𝑊𝑡 – max shear stress torsion
𝑁 shape 𝑝
𝐴𝑛𝑒𝑐 =
𝜎𝑎
𝛾𝑚𝑎𝑥 𝑙 = 𝑅Δ𝜑 – max angle of torsion
𝑁∙𝑙
Δ𝑙 = – elastic deformation 𝜋𝑑 4
𝐸∙𝐴 𝐼𝑧 = 𝐼𝑦 = 64
– principal moment of 𝑀𝑙
Δ𝜑 = 𝐺𝐼𝑡 – slope deflection
𝑝
𝐹 inertia for circle shape
𝜎𝑛𝑜𝑚 = (𝑤−𝑑)∙𝑡 – nominal stress
𝜋(𝐷 4 −𝑑4 )
𝜎𝑚𝑎𝑥 𝐼𝑧 = 𝐼𝑦 = - principal moment
𝑘= – stress concentration factor 64
𝜎𝑛𝑜𝑚
of inertia with for tube shape
Δ𝑙 𝑇 = 𝛼 ∙ 𝑙 ∙ 𝑇 – def. produced due to 𝑑2 𝑀 𝑑𝑇
temperature change = = −𝑞 – relation between
𝑑𝑥 𝑑𝑥
load, shear force & bending moment
𝑇
𝜏 = – shear stress
𝐴 𝑀𝑧 𝑀
𝜎= 𝐼𝑧
𝑦 = 𝑊 – Navier’s formula
𝑧
𝑑𝑥
𝑡𝑔 𝛾 = 𝑙
–shear strain where y – the coordinate of the point
in section
𝜏 =𝛾∙𝐺
𝑏ℎ 2
𝐸 𝑊𝑧 = 6
– section modulus for
𝐺= – Poisson Ratio
2(1+𝜐)
rectangular shape bar
𝜋∙𝑑 2
𝐴𝑓 = 𝑛 ∙ 𝑖 – where n=nr. Of bolts 𝜋𝑑 3
4 𝑊𝑧 = 32
– section modulus for
i – nr of shearing area
circular shape
𝐴 = 𝑎(𝑏 − 2𝑎) – area butt welded 𝜋(𝐷 4 −𝑑 4 )
joints a=thickness; b=length 𝑊𝑧 = 32𝐷
– section modulus for
𝜏𝑎𝑆 = 0,8𝜏𝑎 = 0.64𝜎𝑎 tube shape

𝑇𝑆𝑧∗
𝑆𝑧 = ∫𝐴 𝑦𝑑𝐴 – first moment of area 𝜏= 𝑏𝐼𝑧
– Jouraski’s Formula

𝑆𝑦 = ∫𝐴 𝑧𝑑𝐴 3𝑇
𝜏𝑚𝑎𝑥 = 2 𝐴 – tangential stress for
circular bar

You might also like