Modular Mounting System, C13SM Series

For DPharp EJX & EJA-E Differential Pressure and Pressure Transmitters
Introduction

Introduction

The partnership of Yokogawa and AS-Schneider creates a real added value to our customers.

Yokogawa Electric Corporation with its headquarters in Japan is one of the World's Leading Manufacturers and Engineering
Service Provider in the fields of Automation, Measurement and Control.

The AS-Schneider Group with its headquarters in Germany is one of the World's Leading Manufacturers of Instrumentation
Valves and Manifolds. AS-Schneider offers a large variety of Valves and Manifolds as well as numerous accessories needed for
the instrumentation installations globally.

The C13SM Series Manifolds and the corresponding C13SA Series Accessories provide substantial advantages by the simplest and most effective
means to install Yokogawa's DPharp EJX Series and EJA Series Transmitters for Differential Pressure, Gauge and Absolute Pressure
Applications. The C13SM/C13SA Series are designed to be compatible with the Shell® MESC Specifications for Process Instrumentation.

The C13SM/C13SA Components are designed to be used with Transmitters or Gauges for General Differential Pressure and Pressure
Measurements.

All components benefit from a compact design, reduced installation costs and less potential leak points.

Selection can be made from a comprehensive range of bodies with a variety of connections and material options, optimizing installation and
access opportunities.

Continuous product development may from time to time necessitate changes in the details contained in this catalogue. AS-Schneider and
Yokogawa reserve the right to make such changes at their discretion and without prior notice.

All dimensions shown in this catalogue are approximate and subject to change.

The C13SM Series Manifolds are provided

with a choice of C13SA Series Accessories:
• Mounting Plates
• Single and Double Vent Purge Blocks
• Seal Pots
• Steam & Electrical Heaters
• Filling Connectors
• Blind Flanges
• Port Protectors
• Protective Shades and Enclosures
• Anti-Tamper Keys

Introduction
2 Introduction
 General Features & Pressure-Temperature Ratings

Body Material Options

AS Material Equivalent Material Grade

Material Group Material No. Short Name
Designation UNS-No.
acc. to ASTM acc. to JIS

Austenitic Stainless 316 quadruple 1.4401 X5CrNiMo17-12-2 S31600 316 SUS316

Steel certified* 1.4404 X2CrNiMo17-12-2 S31603 316L SUS316L
* Quadruple certified means 316 / 316L / 1.4401 / 1.4404

Standard Features

• Bore Size 5 mm (0.197") Pressure Test:

A Shell Test and a Seat Leakage Test are performed at 1.5 times
• Inlet and Vent Connection: Selectable 1/2 NPT Female Inlet &
the max. allowable (working) pressure acc. to EN 12266-1 - P10,
1/4 NPT Female Vent or G 1/4 Female – DIN 3852-2
P11 and P12 respectively MSS-SP61 (and complies also with ASME
• Equalize and Vent Valves are equipped with an Anti-Tamper B31.1 and B31.3) at every Standard Manifold    g  
100% Pressure
Head Unit – Anti-Tamper Head Unit Options see Page 4. Tested!
• Suitable for Liquid and Gas Service.
Certification:
• Fully Self-draining Certified Mill Test Report (CMTR) as inspection certificate 3.1
acc. to EN 10 204 for valve body material and pressure test
Needle Seal: available as standard.
PTFE and Graphite Packings are available for all valve types.
PMI Test on request. Test points are one each on body and valve
Sour Gas Service: bonnet. A combined certificate for each order is provided listing
Wetted Parts according to a.m. material list are supplied as the chemical analysis for each valve manifold.
standard according to NACEMR0175/MR0103 and ISO 15156
(latest issue). However, valves in 316 are optionally available with Graphite packed manifolds are Fire Safe Tested and Certified as
a needle in Alloy 400, in accordance to MESC Specification. standard.

Optional Features Pressure-Temperature Rating

Oxygen Service:
An option with Reinforced PTFE Packing is offered duly cleaned
and lubricated for Oxygen Service:
Pressure-Temperature Rating:
Max. 420 bar (6,092 psi) @ 60°C (140°F)
Max. 200°C (392°F) @ 90 bar (1,305 psi)

Not every Valve Type is available for Oxygen Service!

If you don‘t find your options in this catalogue please

contact Yokogawa. Packing adjustment may be required during the service life
of the valves.

Valves that have not been cycled for a period of time may
have a higher initial actuation torque.

General Features & Pressure-Temperature Ratings 3

Standard Valve Head Units

Standard Needle Valves

Screwed Bonnet – Needle Seal: Packing Isolate Valve

Features
• Integral Valve Seat – Metal to metal seated

TA-Luft Option: 62 (2.44") open

• Non-rotating Needle
• External Stem Thread – Packing below stem threads.

Standard: 57 (2.24") open

Stem threads are protected from process media
(non-wetted).
• Stem with Cold Rolled Threads
• Blow-out Proof Needle
• Back Seat – Metal to metal secondary needle seal
• Lock Pin – Eliminates unauthorized removal of the bonnet
• Color Coded Dust Cap for operating thread protection
• Standard Packing in PTFE and Graphite available
• Max. allowable (Working) Pressure (PS): 420 bar (6,092 psi)
• Anti-Tamper Valve Head Units for Equalize and Vent Valves
• All Non-wetted Parts in 316 Stainless Steel

Equalize and Vent Valve

Anti-Tamper Key
C13SA-ATKES
65 (2.56")

Stainless Steel Color Coded Dust Cap

Components
For stem thread protection:
Material / Material No.

Body • Isolate blue

• Vent / Test red
Bonnet • Equalize   green
316 / 316L
Needle
Plug
Packing PTFE or Graphite Color Coded Options
Following options are also color
Valve Stem 316 / 316L
coded below dust cap:
Gland 316
Stem Nut 316 Oxygen Service

Lock Nut 316

Set Screw 316
Graphite Packing
T Handle 316
Lock Pin A4
Wetted components listed in bold.

4 Standard Valve Head Units

 Manifolds

Manifolds

The Manifold can be assembled directly to a Standard Mounting Plate, eliminating the need for extra Mounting Accessories and
reducing pipe work on site. The Manifolds can also be supplied with a wide Choice of Accessories.
Pressure-Temperature Rating acc. to Shell MESC:
Max. allowable (Working) Pressure (PS): DIN 19213 400 bar (5,801 psi) @ 38°C (100.4°F)
IEC 61518  413  bar (6,000 psi) @ 38°C (100.4°F)
Max. allowable Temperature (TS): 200°C (392°F)

Manifolds for Differential Pressure Transmitters

Connections
Instrument – Flange Connection acc. to: Process: Vent:
•DIN 19213 Part 2 rev. 1980 G 1/4 Female or 1/2 NPT Female G 1/4 Female or 1/4 NPT Female
•DN EN 61518 Type A

4 Valve Manifold – Type A 4 Valve Manifold – Type B

Double Isolate / Equalize / Vent Block Double Isolate / Double Vent Block

2 Valve Manifold – Type C 5 Valve Manifold – Type K

Single Isolate / Vent Block Double Isolate / Double Equalize / Vent Block

Ordering Code – Different Types for Different Applications

Type MESC Code Description Part Number Ordering Information

4 Valve Manifold
A MESC 60.98.56.20*.1 C13SM-4A
For general applications.
4 Valve Manifold
B MESC 60.98.56.21*.1 For applications where contamination of C13SM-4B
process stream is not permitted.
See Page 14.
2 Valve Manifold
C MESC 60.98.56.22*.1 For pressure applications and level C13SM-2C
measurements on atmospheric tanks.

Not specified in Shell 5 Valve Manifold

K C13SM-5K
MESC With Natural Gas Metering Pattern.
* Digit depends on compression fitting size – Fittings supplied by others.
Note: Direct Mount Manifolds according to MESC 60.98.56.2… are provided with PTFE Seal Ring / Packing. Manifolds with Graphite Seal Ring / Packing are
according to MESC 60.98.56.4…!

Manifolds 5
Manifolds

Manifolds for Pressure Transmitters

Connections
Instrument – Flange Connection acc. to: Process:
•DIN 19213 Part 2 rev. 1980 G 1/4 Female or
•DN EN 61518 Form A 1/2 NPT Female
•Swivel Gauge Connector 1/2 NPT
Vent:
resp. G 1/2
G 1/4 Female or 1/4 NPT Female

2 Valve Manifold – Type D 2 Valve Manifolds – Type E, F and G

Single Isolate/Vent Block with Swivel Gauge Adapter
Flange Connection DIN 19213 see also below illustrations

Filling Connector Facility (plugged)

by default *1

2 Valve Manifold – Type E 2 Valve Manifold – Type F 2 Valve Manifold – Type G

Single Isolate/Vent Block Single Isolate/Vent Block Single Isolate/Vent Block
Swivel Gauge Adaptor 1/2 NPT Male Swivel Gauge Adaptor 1/2 NPT Female Swivel Gauge Adaptor G 1/2 Female

Ordering Code – Different Types for Different Applications

Type MESC Code Description Part Number Ordering Information

2 Valve Manifold
D MESC 60.98.56.23*22.1 For pressure transmitters of the differential C13SM-2D
body design.
2 Valve Manifold
E MESC 60.98.56.3* 25.1 For pressure transmitters with 1/2 NPT C13SM-2E
Female connection.
See Page 14.
2 Valve Manifold
F MESC 60.98.56.3* 5.1 2
For pressure transmitters with 1/2 NPT Male C13SM-2F
connection.
2 Valve Manifold
G MESC 60.98.56.3* 27.1 For pressure transmitters with G 1/2 Male C13SM-2G
(1/2 BSP P) connection.
*1 If required, a Filling Connetor can also be retrofitted. However, Filling Connectors to be ordered separately, see page 11.
*2 Digit depends on compression fitting size – Fittings supplied by others.
Note: Direct Mount Manifolds according to MESC 60.98.56.2… are provided with PTFE Seal Ring / Packing. Manifolds with Graphite Seal Ring / Packing are
according to MESC 60.98.56.4…!

6 Manifolds
 Mounting Plates

Mounting Plates

The Mounting Plates are designed to ensure a Simple and Quick Installation of Manifolds with other Accessories including the
Nameplate. There are four different types of Mounting Plates available. The Plates are made of 316 SST and are designed to be
assembled to a 2" Pipestand. Type C13SA-SAMA# is used, if a Protective Shade is required.

C13SA-SAMA1 C13SA-SAMA2

C13SA-SAMB2
C13SA-SAMB1

Ordering Code

MESC Code Standard Drawing Description Part Number

MESC 60.98.91.105.1 37.813 Mounting Plate A1 C13SA-SAMA1

MESC 60.98.91.110.1 37.815 Mounting Plate A2 C13SA-SAMA2
MESC 60.98.91.118.1 37.814 Mounting Plate B1 C13SA-SAMB1
MESC 60.98.91.120.1 37.816 Mounting Plate B2 C13SA-SAMB2
37.601 Stainless Steel Tag Plate C13SA-SACS0

Mounting Plates 7
Purge Blocks

Purge Blocks

The Purge Blocks have two main Applications:

1. Application:
Purge protection of the instrument using a purge medium to keep the process away from the instrument by maintaining a higher
pressure than the process medium.

2. Application:
To provide a sensing medium for differential pressure instruments on level indication services.

Material: 316 / 316L / 1.4401 / 1.4404

There are two Vent Purge Blocks available, the Double Vent Purge Block for differential pressure application and the Single Vent
Purge Block for static pressure applications.

Connections Pressure-Temperature Rating acc. to Shell MESC

G 1/4 Female (Standard) or Max. allowable (Working) Pressure (PS):

1/4 NPT Female (Optional) 413 bar (6,000 psi) @ 38°C (100.4°F)
Outlets: Max. allowable Temperature (TS):
Are equipped with Soft Seated Check Valves • 200°C (392°F) for PTFE Packing
Inlet:
Is provided with an Integral Filter

C13SA-SVAS# C13SA-SVAD#
Single Double

Outlet Outlet Outlet

Inlet Inlet

Vent Vent

Ordering Code

MESC Code Description Connection Part Number

MESC 60.98.70.*10.1 G 1/4 Female C13SA-SVASG

Single Vent Purge Block – Type S
1/4 NPT Female C13SA-SVASC
MESC 60.98.70.*20.1 G 1/4 Female C13SA-SVADG
Double Vent Purge Block – Type D
1/4 NPT Female C13SA-SVADC
* Digit depends on compression fitting size – Fittings supplied by others.

8 Purge Blocks
 Seal Pots

Seal Pots

The Seal Pots are used for systems requiring an open seal such as
high temperature, toxic or corrosive service. The Seal Pots are
used with an Immiscible Seal Fluid. The difference in density to
the process media will provide a barrier in front of the Manifold
and Instrument.

Location

Seal Pot is located below the Orifice Plate:

A Seal Fluid with higher specific gravity than the Process Medium
is to be used.

Seal Pot is located above the Orifice Plate:

A Seal Fluid with lower specific gravity is to be used.

Pressure-Temperature Rating acc. to Shell MESC C13SA-SSB0#

Max. allowable (Working) Pressure (PS):

413 bar (6,000 psi) @ 38°C (100.4°F)
Max. allowable Temperature (TS):
450°C (842°F)

Specifications

Material: Volume:
316 / 316L / 1.4401 / 1.4404 Approx. 50 cm³

Connection:
G 1/4 Female (Standard) or
1/4 NPT Female (Optional)

Ordering Code

MESC Code Description Connection Part Number

MESC 60.98.70.**0.1 G 1/4 Female C13SA-SSB0G

Seal Pot
1/4 NPT Female C13SA-SSB0C
* Digits depend on compression fitting size – Fittings supplied by others.

Seal Pots 9
Heaters

Heaters

The Steam Tracing Blocks & Electrical Heaters are used to

provide Frost Protection and to maintain Process Temperatures
given that the heaters are mounted directly to the Manifold which
ensures efficient Heat Transfer to the Manifold and Transmitter
Body.

Steam Tracing Blocks

Steam Tracing is provided through a separate Stainless Steel

Block which is mounted directly to the Manifold with one
Stainless Steel M8 Mounting Bolt.

The Connection to the Steam Line is provided by two G 1/4

Female Ports as standard, optional by two 1/4 NPT Female Ports.

Steam Tracing Blocks – C13SA-SAS0#

Pressure-Temperature Rating acc. to Shell MESC

Max. allowable (Working) Pressure (PS):   

 20 bar (290 psi) @ 210°C (410°F)
Max. allowable Temperature (TS):
220°C (428°F)

Electrical Heater

Conduction Heater with self-limiting output characteristic,

supplied with cable length of 1m. Is directly mounted to the
Manifold with one Stainless Steel M8 Mounting Bolt.

Material: Aluminum (sea water resistant)

Size: 90 x 40 x 30 mm
Voltage: 110 V to 265 V AC (50/60 Hz)
Rating: 50 W
Ingress Protection: IP68, NEMA 4X C13SA-SAE00

Type of Protection (Gas): II 2 G Ex db IIC T4

Type of Protection (Dust): II 2 D Ex tb IIIC; T 135°C
EC Examination Certificate: PTB 02 ATEX 1116 X

Ordering Code

MESC Code Description Connection Part Number

MESC 60.98.70.*10.1 G 1/4 Female C13SA-SAS0G

Steam Tracing Block
1/4 NPT Female C13SA-SAS0C
MESC 60.98.70.050.1 Electrical Heater C13SA-SAE00
* Digits depend on compression fitting size – Fittings supplied by others.

10 Heaters
 Filling Connectors, Blind Flanges & Anti-Tamper

Filling Connectors

The Filling Connectors are used if purge protection is required

but no purge block is installed. The Filling Connector allows the
system to be filled with Purge Medium through the instrument
cavities. The Filling Connector has an integral Check Valve and is
available with different connections.

Material: 316 / 316L / 1.4401 / 1.4404

The Filling Connector is supplied with SS 316 Hex Bolts 7/16-20 UNF x
1 1/2" and PTFE Seal Ring as Standard. Flange Connection according
to DIN 19213. If a Graphite Seal Ring is specified, the Flange Connec-
tion will be according to IEC 61518 Type A.

Pressure-Temperature Rating acc. to Shell MESC

Max. allowable (Working) Pressure (PS): C13SA-SAFA##

DIN 19213 400 bar (5,801 psi) @ 38°C (100.4°F)
IEC 61518 413    bar (6,000 psi) @ 38°C (100.4°F)
Max. allowable Temperature (TS):
200°C (392°F)

Ordering Code

MESC Code Description Seal Ring Part Number

MESC 60.98.90.106.1 Filling Connector PTFE C13SA-SAFA1

MESC 60.98.90.406.1 6 mm Graphite C13SA-SAFB1
MESC 60.98.90.107.1 Filling Connector PTFE C13SA-SAFA7
MESC 60.98.90.407.1 1/4" Graphite C13SA-SAFB7

Blind Flanges

The Blind Flange enables standard instrument flange connections

to be blanked off as required.

Material: 316 / 316L / 1.4401 / 1.4404

The Blind Flange is supplied with SS 316 Hex Bolts 7/16-20 UNF x
1 1/2" and PTFE Seal Ring as Standard. Flange Connection accor-
ding to DIN 19213. If a Graphite Seal Ring is specified, the Flange C13SA-SAGA0 – PTFE Seal Ring
Connection will be according to IEC 61518 Type A. C13SA-SAGB0 – Graphite Seal Ring

Anti-Tamper Key
Removable Anti-Tamper Key to operate the Anti-Tamper Vent
Valves.

C13SA-ATKES

Filling Connectors, Blind Flanges & Anti-Tamper 11

Port Protectors, Protective Shades & Enclosures

Port Protectors

The Port Protectors prevent the ingress of Bugs and Dirt and are
supplied in SS 316/316L.

Ordering Code

Description Part Number

Port Protector 1/4 NPT C13SA-SADN2 C13SA-SAD##

Port Protector 1/2 NPT C13SA-SADN4

Port Protector G 1/4 C13SA-SADG2
Port Protector G 1/2 C13SA-SADG4

Protective Shades & Enclosures

The Protective Shades were designed to protect the Instrument

from Heavy Rain and Intensive Sunlight.

The Enclosures provide a Complete Environmental Protection of

the Manifold and the Instrument Body. They are mainly used if
the System is exposed to Low Temperatures.
Protective Shade
C13SA-SAPPA
Ordering Code

MESC Code Description Part Number

Protective Shade
MESC 60.98.91.205.1 C13SA-SAPPA
G.R.P. Antistatic
Protective Shade
C13SA-SAPPS
SS 316
Enclosure G.R.P. Protective Shade
MESC 60.98.91.305.1 C13SA-SAPEA
Antistatic C13SA-SAPPS

Enclosure
C13SA-SAPEA

12 Port Protectors, Protective Shades & Enclosures

 Cross Reference

Cross Reference –
Referring to the Global MESC Code

MESC Code Description Seal Ring / Packing Part Number Page

MESC 60.98.56.20*.1 PTFE C13SM-4AA

4 Valve Manifold Type A
MESC 60.98.56.40*.1 Graphite C13SM-4AB
MESC 60.98.56.21*.1 PTFE C13SM-4BA
4 Valve Manifold Type B 5
MESC 60.98.56.41*.1 Graphite C13SM-4BB
MESC 60.98.56.22*.1 PTFE C13SM-2CA
2 Valve Manifold Type C
MESC 60.98.56.42*.1 Graphite C13SM-2CB
MESC 60.98.56.23*.1 PTFE C13SM-2DA
2 Valve Manifold Type D
MESC 60.98.56.43*.1 Graphite C13SM-2DB
MESC 60.98.56.3*5.1 2 Valve Manifold Type E PTFE C13SM-2EA 6
MESC 60.98.56.3*5.1 2 Valve Manifold Type F PTFE C13SM-2FA
MESC 60.98.56.3*7.1 2 Valve Manifold Type G PTFE C13SM-2GA
MESC 60.98.91.105.1 Mounting Plate A1 C13SA-SAMA1
MESC 60.98.91.110.1 Mounting Plate A2 C13SA-SAMA2
7
MESC 60.98.91.118.1 Mounting Plate B1 C13SA-SAMB1
MESC 60.98.91.120.1 Mounting Plate B2 C13SA-SAMB2
MESC 60.98.70.*10.1 Single Vent Purge Block Type S PTFE C13SA-SVASG
8
MESC 60.98.70.*20.1 Double Vent Purge Block Type D PTFE C13SA-SVADG
MESC 60.98.70.**0.1 Seal Pot Graphite C13SA-SSB0G 9
MESC 60.98.70.*10.1 Steam Tracing Block C13SA-SAS0G
10
MESC 60.98.70.050.1 Electrical Heater C13SA-SAE00
MESC 60.98.90.106.1 PTFE C13SA-SAFA1
Filling Connector 6 mm
MESC 60.98.90.406.1 Graphite C13SA-SAFB1
MESC 60.98.90.107.1 PTFE C13SA-SAFA7
Filling Connector 1/4"
MESC 60.98.90.407.1 Graphite C13SA-SAFB7 11
PTFE C13SA-SAGA0
Blind Flange
Graphite C13SA-SAGB0
Anti-Tamper Key C13SA-ATKES
Port Protector C13SA-SAD##
MESC 60.98.91.205.1 Protective Shade G.R.P. Antistatic C13SA-SAPPA
12
Protective Shade SST C13SA-SAPPS
MESC 60.98.91.305.1 Enclosure G.R.P. Antistatic C13SA-SAPEA
* Compression Fittings supplied by others.

Cross Reference 13
Ordering Information – Standard & Additional Features

Model Suffix Codes Description

C13SM ................................................................ Manifold (AS-Schneider) – Modular Mounting System

-2CA ....................................................... 2 Valve, Type C, PTFE Packing / Seal Rings, DIN 19213 Part 2
-2CB ....................................................... 2 Valve, Type C, Graphite Packing / Seal Rings, IEC 61518-A
-2DA ....................................................... 2 Valve, Type D, PTFE Packing / Seal Rings, DIN 19213 Part 2
-2DB ....................................................... 2 Valve, Type D, Graphite Packing / Seal Rings, IEC 61518-A
-2EA ....................................................... 2 Valve, Type E, PTFE Packing, 1/2 NPT Male
-2EB ....................................................... 2 Valve, Type E, Graphite Packing, 1/2 NPT Male
Standard Features

-2FA ....................................................... 2 Valve, Type F, PTFE Packing, 1/2 NPT Female

Valve Type / -2FB ....................................................... 2 Valve, Type F, Graphite Packing, 1/2 NPT Female
Seal Rings -2GA ....................................................... 2 Valve, Type G, PTFE Packing, G 1/2 Female
-2GB ....................................................... 2 Valve, Type G, Graphite Packing, G 1/2 Female
-4AA ....................................................... 4 Valve, Type A, PTFE Packing / Seal Rings, DIN 19213 Part 2
-4AB ....................................................... 4 Valve, Type A, Graphite Packing / Seal Rings, IEC 61518-A
-4BA ....................................................... 4 Valve, Type B, PTFE Packing / Seal Rings, DIN 19213 Part 2
-4BB ....................................................... 4 Valve, Type B, Graphite Packing / Seal Rings, IEC 61518-A
-5KA ....................................................... 5 Valve, Type K, PTFE Packing / Seal Rings, DIN 19213 Part 2
-5KB ....................................................... 5 Valve, Type K, Graphite Packing / Seal Rings, IEC 61518-A

Material / -SB ............................................... SS 316/316L, Process 1/2 NPT Female / Vent 1/4 NPT Female
Connections -SG ............................................... SS 316/316L, Process G 1/4 Female / Vent G 1/4 Female

– 00 .......................................... Always '00', None

Model Suffix Codes Description

-K2 .................................. For 2 valve

Additional Features

Oxygen Service – -K4 .................................. For 4 valve

For Manifolds with PTFE
Packing only -K5 .................................. For 5 valve
-NN .................................. None

SG2 ......................... NACE MR0175 with Alloy 400 Needle, 2 Valve

SG4 ......................... NACE MR0175 with Alloy 400 Needle, 4 Valve
Sour Gas Service
SG5 ......................... NACE MR0175 with Alloy 400 Needle, 5 Valve
NNN ......................... None

Example for building up the Part No. of a 4 Valve Manifold acc. to the above mentioned Ordering Information:

C13 S M - 4 A A- S B 0 0 - NN NNN Manifold (AS-Schneider) – Modular Mounting System

C13S M - 4 4 Valve Manifold
............. AA Type A, PTFE Packing / Seal Rings, DIN 19213 Part 2
.................. -SB SS 316/316L, Process 1/2 NPT Female / Vent 1/4 NPT Female
....................... 00 Always '00', None
........................... -NN None
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NNN None

14 Ordering Information – Standard & Additional Features

 Ordering Information – Accessories

Model Suffix Codes Description

C13SA ........................................... Accessory for Manifold (AS-Schneider) – Modular Mounting System

-SAMA1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mounting Plate A1, SS 316
-SAMA2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mounting Plate A2, SS 316
-SAMB1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mounting Plate B1, SS 316
-SAMB2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mounting Plate B2, SS 316
-SACS0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tag Plate, SS 316
-SAPP S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SAP Protective Shade SS 316
-SAPPA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SAP Protective G.R.P. Antistatic
-SAPEA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SAE Enclosure G.R.P. Antistatic
-SADN2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Port Protectors, 1/4 NPT, SS 316
-SADN4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Port Protectors, 1/2 NPT, SS 316
-SADG2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Port Protectors, G 1/4, SS 316
-SADG4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Port Protectors, G 1/2, SS 316
-SVASG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Purge Blocks, Single Vent, G 1/4, SS 316
For Modular
Mounting -SVASC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Purge Blocks, Single Vent, 1/4 NPT, SS 316
Accessory

Manifolds
-SVADG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Purge Blocks, Double Vent, G 1/4, SS 316
-SVADC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Purge Blocks, Double Vent, 1/4 NPT, SS 316
-SSB0G ................................ Seal Pot, G 1/4, SS 316
-SSB0C ................................ Seal Pot, 1/4 NPT, SS 316
-SAS0G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Steam Tracing Block, G 1/4, SS 316
-SAS0C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Steam Tracing Block, 1/4 NPT, SS 316
-SAE00 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Electrical Heater, Aluminum (sea water resistant)
-SAFA1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Filling Connector, SS 316, PTFE Seal Ring, for Tube OD 6 mm
-SAFB1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Filling Connector, SS 316, Graphite Seal Ring, for Tube OD 6 mm
-SAFA7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Filling Connector, SS 316, PTFE Seal Ring, for Tube OD 1/4"
-SAFB7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Filling Connector, SS 316, Graphite Seal Ring, for Tube OD 1/4"
-SAGA0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Blind Flange, SS 316, PTFE Seal Ring
-SAGB0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Blind Flange, SS 316, Graphite Seal Ring

-ATKES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Anti-Tamper Key

-PMIR 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PMI Test Report, 2 Valve
Common
-PM I R4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PMI Test Report, 4 Valve
-PM I R 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PMI Test Report, 5 Valve
-SRPAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Seal Ring, PTFE, DIN 19213 / IEC A
-SRGAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Seal Ring, Graphite, IEC A

Ordering Information – Accessories 15

Products are designed and manufactured by Armaturenfabrik Franz Schneider (AS-Schneider), Germany
for Yokogawa Electric Corporation.

Armaturenfabrik Franz Schneider GmbH + Co. KG AS-Schneider Asia-Pacific Pte. Ltd.

World Headquarters 970 Toa Payoh North, #02-12/14/15, Singapore 318992,
Bahnhofplatz 12, 74226 Nordheim, Germany Singapore
Tel: +49 7133 101-0 Tel: +65 62 51 39 00
http://www.as-schneider.com   http://www.as-schneider.sg

Armaturenfabrik Franz Schneider SRL AS-Schneider America, Inc.

Str. Basarabilor, Nr. 7, 100036 Ploiesti, Romania 17471 Village Green Dr, Houston, TX 77040, U.S.A.
Tel: +40 244 384 963 Tel: +1 281 760 1025
http://www.as-schneider.ro http://www.as-schneider.com

AS-Schneider Middle East FZE

P.O. Box 18749, Dubai, United Arab Emirates
Tel: +971 4 880 85 75
http://www.as-schneider.ae YS-3601-EN I August 2017 / 2nd Edition

are registered trademarks of Yokogawa Electric Corporation.

Other company names and product names used in this material are registered trademarks or trademarks of their respective owners.

YOKOGAWA ELECTRIC CORPORATION

World Headquarters
2-9-32, Nakacho, Musashino-shi, Tokyo 180-8750, Japan
http://www.yokogawa.com

YOKOGAWA CORPORATION OF AMERICA

2 Dart Road, Newnan, GA30265, U.S.A.
http://www.yokogawa.com/us/

YOKOGAWA EUROPE B.V.

Euroweg 2, 3825 HD Amersfoort, The Netherlands
http://www.yokogawa.com/eu/

YOKOGAWA ENGINEERING ASIA PTE. LTD.

5 Bedok South Road, Singapore 469270 Represented by:
http://www.yokogawa.com/sg/

YOKOGAWA CHINA CO., LTD.

3F TowerD Cartelo Crocodile Building, No. 568 West Tianshan Road,
Shanghai 200335, China
http://www.yokogawa.com/cn/

YOKOGAWA MIDDLE EAST B.S.C.(c)

P.O. Box 10070, Manama
Building 577, Road 2516, Busaiteen 225, Muharraq, Bahrain
http://www.yokogawa.com/bh/