For more information, please visit the product page.

date 03/25/2016
page 1 of 3

MODEL: PJ-048H │ DESCRIPTION: DC POWER JACK

FEATURES
• 3.0 mm center pin
• 5.0 A rating
• right angle orientation
• through hole
• kinked pins

RoHS

SPECIFICATIONS
parameter conditions/description min typ max units
rated input voltage 24 Vdc
rated input current 5 A
between terminal and mating plug 50 mΩ
contact resistance1
between terminal in a closed circuit 30 mΩ
insulation resistance at 500 Vdc 100 MΩ
voltage withstand at 50/60Hz for 1 minute 500 Vac
insertion/withdrawal force 0.3 3 kg
terminal strength any direction for 10 seconds 500 g
operating temperature -25 85 °C
life 5,000 cycles
flammability rating UL94V-0
RoHS 2011/65/EU
Note: 1. When measured at a current of less than 100 mA/1 kHz

SOLDERABILITY
parameter conditions/description min typ max units
wave soldering dipped in solder pot for 5 ±0.5 seconds 255 260 265 °C

cui.com
 For more information, please visit the product page.

CUI Inc │ MODEL: PJ-048H │ DESCRIPTION: DC POWER JACK date 03/25/2016│ page 2 of 3

MECHANICAL DRAWING
units: mm[inches] MATERIAL PLATING
tolerance:
X.X ±0.2mm center pin copper nickel plated
X.XX ±0.1mm terminal 1 brass silver plated
X.XXX ±0.05mm terminal 2 copper alloy silver plated
terminal 3 brass silver plated
plastic PBT

14.5 0.571

11.4 0.449 12.1 0.476

7.30 0.287

3.00 0.118

12.6 0.496

7.0 0.276

3.5 0.138
(3 PLCS)
2 3 1
2.50 0.098
(2 PLCS) 3.0 0.118 3.0 0.118

5.0 0.197 10.8 0.425

1.8 0.071
+0.10
3.0 0.118 3.0 0.118 1.00 0.039 -0.00

1.00X3.50

2 1
9.4 0.370 3.00 0.118

5.0 0.197

1.00X3.00 1.70 0.067

10.8 0.425 (2 PLCS) (2 PLCS)
6.00 0.236
PCB LAYOUT (2 PLCS)
TOP VIEW

1
SCHEMATIC 3
2
MATING PLUG Model PJ-048H
Jack Insertion Depth: 9.1 mm Center Pin Ø3.0 mm

Note: 1. All specifications measured at 10~35°C, humidity at 45~85%, under standard atmospheric pressure, unless otherwise noted.

cui.com
 For more information, please visit the product page.

CUI Inc │ MODEL: PJ-048H │ DESCRIPTION: DC POWER JACK date 03/25/2016│ page 3 of 3

REVISION HISTORY

rev. description date

1.0 initial release 07/30/2007

1.01 applied new spec template 09/12/2013
1.02 increased voltage rating 03/25/2016
The revision history provided is for informational purposes only and is believed to be accurate.

Headquarters
20050 SW 112th Ave. Fax 503.612.2383
Tualatin, OR 97062 cui.com
800.275.4899 [email protected]

CUI offers a one (1) year limited warranty. Complete warranty information is listed on our website.

CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is
assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use.

CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a
life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.