Scribd
Upload
3K views

Pressure Buildups Vs Static Gradient Survey Flowing Gradient Survey

The document discusses pressure build-up tests versus static and flowing gradient surveys for high rate gas wells. Pressure build-up tests provide important reservoir information but require shutting in the well. Static and flowing gradient surveys are often used instead to avoid shutting in the well. Surface pressure measurements using the SPIDR gauge can perform pressure transient analysis without shutting in the well and provide an alternative to downhole gauges.

Uploaded by

fadhli202
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
3K views

Pressure Buildups Vs Static Gradient Survey Flowing Gradient Survey

The document discusses pressure build-up tests versus static and flowing gradient surveys for high rate gas wells. Pressure build-up tests provide important reservoir information but require shutting in the well. Static and flowing gradient surveys are often used instead to avoid shutting in the well. Surface pressure measurements using the SPIDR gauge can perform pressure transient analysis without shutting in the well and provide an alternative to downhole gauges.

Uploaded by

fadhli202
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Pressure Build-ups (PBU) vs.

Static Gradient Survey / Flowing Gradient Survey


During a recent international marketing trip we have found that many operators of high rate gas and gas
condensate wells perform Static Gradient Surveys (SGS) and/or Flowing Gradient Surveys (FGS) as
opposed to Pressure Build-up or drawdown tests. The reason frequently given is that operational
procedures dictate that a well must be shut-in when running wireline into the wellbore. By shutting in the
well, before running wireline into the wellbore, you have introduced a major pressure transient into the
reservoir that distorts the results from a subsequent build-up test unless you are willing to extend the
flowing and shut-in times drastically. This is something the operator is rarely willing to do and therefore he
only performs a SGS and/or a FGS.
When surveillance work is limited to Static and Flowing Gradient Surveys they are losing the opportunity
to acquire critically important reservoir information such as completion efficiency (skin), permeability and
reservoir pressure (P*).The need to derive skin and permeability thru transient testing is invaluable as you
seek to understand not only the change in reservoir pressure over time due to depletion effects but also
understand the changing nature of kh due to formation compaction, etc. and if skin is accreting over time
due to precipitates or fines migration that tend to restrict flow in gravel pack completions.
Utilizing surface pressure measurements for pressure transient analysis avoids the concerns associated
with running tools into a flowing well. The SPIDR® gauge well testing system has been performing that
function for almost 25 years in gas and high-yield gas condensate wells all over the world. The system
consists of the data acquisition unit, the SPIDR® gauge, and a very sophisticated computer model that
converts well head pressures to reservoir conditions. The computer model takes into account frictional
losses in the flowing wellbore, thermal effects in the well bore during rate changes, and phase changes in
the wellbore going from flowing to shut-in conditions.
One of the primary ways that Halliburton demonstrates effectiveness compared to downhole gauges is to
perform a simultaneous trial comparison. A downhole gauge is run to TD while the SPIDR® gauge is
simultaneously capturing pressure data at the wellhead. To maximize effectiveness and value, a PBU, as
a minimum should be performed. If the SPIDR® gauge converted data proves to be acceptable to the
customer and SPIDR® Surface Well Testing Technology is deemed as a NO RISK and LOW COST
alternative to running downhole; the SPIDR® gauge can be used for future pressure transient testing
surveys WITHOUT operational concerns.

© 2012 Halliburton. All Rights Reserved

You might also like