Scribd
Upload
14K views

Painting Inspection Report

This painting inspection report summarizes the painting of a job. It lists the application method, area, primers, coats, weather conditions, and paint products used. It also includes checks of conditions like temperature and humidity during painting. Dry film thickness measurements are reported for primer, second coat, and top coat at different check points on the surface. The inspection was inspected, reviewed, witnessed and approved.

Uploaded by

Alfian Imaduddin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
14K views

Painting Inspection Report

This painting inspection report summarizes the painting of a job. It lists the application method, area, primers, coats, weather conditions, and paint products used. It also includes checks of conditions like temperature and humidity during painting. Dry film thickness measurements are reported for primer, second coat, and top coat at different check points on the surface. The inspection was inspected, reviewed, witnessed and approved.

Uploaded by

Alfian Imaduddin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

REPORT NO.

REV.
PAINTING INSPECTION REPORT DATE

SHIFT [DAY]

[NIGHT]
PAGE

JOB NO. : PROJECT NAME :


CLIENT : LOCATION :
APPLICATION METHOD AREA PRIMER COAT : µ SPECIFICATION :

SECOND COAT : µ BLASTING DATE :


AIRLESS BLASTING CHAMBER
TOP COAT : µ PRIMER COAT DATE :

CONVENTIONAL OPEN AREA WEATHER CONDITION : SECOND COAT DATE :


ROUGHNESS : TO µ TOP COAT DATE :

BLASTING METHOD PAINT CONSUMABLE PRODUCT


STEEL GRIT BLAST : PRIMER SECOND COAT TOP COAT
MESH STEEL GRIT : TYPE : TYPE : TYPE :
SAND BLAST : BRAND : BRAND : BRAND :
MESH SAND BLAST : COLOUR : COLOUR : COLOUR :
BATCH NO. : BATCH NO. : BATCH NO. :
THINNER NO. : THINNER NO. : THINNER NO. :
CHECK CONDITION PAINTING SYSTEM
BLASTING PRIMER SECOND COAT TOP COAT
TIME
TEMP. / DRY TEMP. ºC ºC ºC ºC
WET TEMPERATURE ºC ºC ºC ºC
DEW POINT ºC ºC ºC ºC
HUMIDITY % % % %
STEEL TEMPERATURE ºC ºC ºC ºC

SKETCH :

PRIMER AFTER SECOND COAT AFTER TOP COAT


MARK NUMBER QTY CHECK DRY FILM THICKNESS AVG DRY FILM THICKNESS AVG DRY FILM THICKNESS AVG RESULT REMARK
POINT A B C D DFT A B C D DFT A B C D DFT

INSPECTED BY REVIEWED BY WITNESSED BY APPROVED BY,

QC INSPECTOR QC COORDINATOR
Form : BCWP-FAB-010_03

You might also like