COPPER DATA CABLES, SHIELDED

Data cable F/FTP Cat.7 AWG23

CU 7052 4P / 2x4P F8

Drain wire Wire

Tinned 1.6 mm Ø
copper wire

Outer sheath Screen Screen Inner conductor

FRNC/LS0H Alu PETP foil pair AWG23
orange RAL 2003 Alu PETP foil Bare copper wire

PRODUCT INFORMATION
Copper

FEATURES Electrically and mechanically high-quality Cat.7 data cable - exceeds the requirements
of ISO/IEC 11801, IEC 61156-5, EN 50173-1 and EN 50288-4-1.
Excellent shielding effect due to individually screened pairs and overall foil screen.
Compatible with all current connecting hardware in accordance with EN 50173 and ISO/IEC 11801.

APPLICATIONS Data cable for structured premises cabling.

For the transmission of digital and analogue voice, video and data signals.
Suitable for all ICT network applications up to class F applications (600 MHz) in accordance
with EN 50173-1 and ISO/IEC 11801 and for the transmission of broadband signals (such as cable TV)
Fibre Optics

in accordance with IEC 15018.

Applicable for Power over Ethernet (PoE) / PoE+.

VERSIONS
Cabinets & Racks

Article No. Dimension Sheath Sheath Ø Weight Cu weight Fire load PU

n x n x mm (AWG) mm kg/km kg/km kWh/m MJ/m
182911 4 x 2 x 0.57 (AWG23) FRNC/LS0H 1) 7.4 60 31.1 0.16 0.57 1000 m drum
182912 2 x (4 x 2 x 0.57 (AWG23)) FRNC/LS0H 1) 7.4 x 15.6 120 62.2 0.32 1.14 500 m drum
Data Centre

1)
FRNC/LS0H = Flame Retardant Non Corrosive / Low Smoke Zero Halogen
Wireless
Multimedia

CU 7052 4P/2x4P 0712/e

General Information

42 Subject to technical modification.

 COPPER DATA CABLES, SHIELDED
Data cable F/FTP Cat.7 AWG23
CU 7052 4P / 2x4P F8

ELECTRICAL CHARACTERISTICS

CATEGORY 5e 6 6A 7
Frequency [MHz] 1 4 10 100 250 500 600 862
Attenuation [dB/100m] 1,9 3,7 5,6 17,9 28 41 46 54
NEXT [dB] 98 98 98 98 98 90 88 81
PS NEXT [dB] 95 95 95 95 95 87 85 78
ACR-N [dB] 96 94 92 80 70 56 42 27
PS-ACR-N [dB] 93 91 89 77 67 53 39 24
ACR-F [dB] 96 96 96 76 68 54 43 35
PS-ACR-F [dB] 93 93 93 73 64 51 40 32
Return loss [dB] 24 28 31 31 26 24 23 20
These performance data are typical measured values.

Copper
[dB]
140
Loop resistance at 20° C: 140 Ω/km
Mutual capacitance: 42 pF/m 120
1 NEXT 7052
Impedance at 100 MHz: 100 Ω ±5 Ω 1 2 NEXT
Coupling attenuation 100
EN 50288-4-1
(limit curve of critical state -
80
IEC 61156): ≥ 75 dB 2 3 Attenuation
Near end unbalance att. LCL: > 40 dB 60
EN 50288-4-1

Delay Skew: 12 ns/100 m 4

40 4 Attenuation 7052
NVP: 81 %

Fibre Optics
20 3

0
1 [MHz] 10 100 1'000 10'000

CU 7052 4P CU 7052 2x4P F8

MECHANICAL Bending radius (flat side) during draw-in: ≥ 60 mm ≥ 60 mm
CHARACTERISTICS permanently installed: ≥ 30 mm ≥ 30 mm
Tensile strength: ≤ 110 N ≤ 220 N
Crush resistance: ≥ 1000 N/10 cm ≥ 1000 N/10 cm
Impact: ≥ 10 impacts ≥ 10 impacts
Temperature range during installation: 0° C to + 50° C 0° C to + 50° C

Cabinets & Racks

in operation: -20° C to + 60°C -20° C to + 60° C

GENERAL CHARACTERISTICS Wire colour code white/blue

white/orange
white/green
white/brown Data Centre
in accordance with IEC 60189 and IEC 60708

Imprint DATWYLER «cable type» «additional text» «batch number» «meter marks»

Zero halogen,
Wireless

non corrosive gases IEC 60754-1/-2, EN 50267-2-1/-2-2, VDE 0482-267-2-1/-2-2

Flame propagation IEC 60332-1-2, EN 60332-1-2, VDE 0482-332-1-2
Flame spread IEC 60332-3-24, EN 50266-24 Cat. C, VDE 0482-266-2-4 Cat. C
Smoke density IEC 61034-1/-2, EN 61034-1/-2 (EN 50268-1/-2),
Multimedia

VDE 0482-1034-1/-2 (VDE 0482-268)-1/-2)

Power over Ethernet plus IEEE 802.3at
EMC shielded
Cat./Class better than Cat.7 / Class F
General Information

Subject to technical modification. 43