Scribd
Upload
682 views

8086 TASM Program To Add Two 8 Bit Numbers

The document describes an assembly language program that adds two 8-bit numbers. It details the algorithm, which includes getting input from the keyboard, converting between ASCII and hexadecimal, isolating digits, and outputting the final sum. The program code and sample output are also included.

Uploaded by

STUDENTS OF DOE CUSAT
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
682 views

8086 TASM Program To Add Two 8 Bit Numbers

The document describes an assembly language program that adds two 8-bit numbers. It details the algorithm, which includes getting input from the keyboard, converting between ASCII and hexadecimal, isolating digits, and outputting the final sum. The program code and sample output are also included.

Uploaded by

STUDENTS OF DOE CUSAT
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 4

ASM Program to Add Two 8 Bit Numbers

Objective:
Write an assembly language program for 8 bit addition .
Prerequisite:
TASM assembler
Algorithm for 8 bit addition:
1) Start
2) Initialize data segment through AX register in the DS register.
3) Display the message as “Enter the first number”
4) Read first digit in AL register through keyboard (e.g. AL=31h)
5) Call Input procedure to make a number from ASCII hexadecimal to a normal hexadecimal
number.AL=01h
6) Move contents of AL register to a BL. (BL AL so BL=01h)
7) Rotate the contents of BL register by 4 positions at left side. (BL=10h)
8) Read a second digit in AL register through keyboard AL=35h
9) Call Input procedure to make a number from ASCII hexadecimal to a normal hexadecimal
number. AL=05h
10) Add the contents of BL and AL store the result in BL (BLBL+AL so BL=15h)
11) Display the message as “Enter the second number”
12) Read first digit in AL register through keyboard AL=32h
13) Call Input procedure to make a number from ASCII hexadecimal to a normal hexadecimal
number.AL=02h
14) Move contents of AL register to a CL. (CL AL so CL=02h)
15) Rotate the contents of CL register by 4 positions at left side. (CL=20h)
16) Read a second digit in AL register through keyboard (AL=33h)
17) Call Input procedure to make a number from ASCII hexadecimal to a normal hexadecimal
number. AL=03h
18) Add the contents of CL and AL store the result in CL (CLCL+AL so CL=23h)
(Now both numbers are accepted as 15h and 23h)
19) Add the contents of BL and CL and result gets stored in BL (E.g ADD BL,CL so BL=38h)
20) Preserve the result of addition in some temporary variable say temp from BL.
21) Mask the first nibble by AND operation with number F0h (AND BL,F0h so BL=30h)
22) Call Output procedure with BL register to make a digit back in ASCII hexadecimal range
(BL=33h)
23) Move the contents of BL to DL and display it on the screen
24) Move result from temporary variable to BL again (So BL=38h)
25) Mask the second nibble by AND operation with number 0Fh (AND BL,0Fh so BL=08h)
26) Call Output procedure with BL register to make a digit back in ASCII hexadecimal range
(BL=38h)
27) Move the contents of BL to DL and display it on the screen
28) Stop
Algorithm for Input procedure:(To accept input from 0 to F)
1) Compare the contents of AL with 41h.
2) Jump to step no 4 if carry flag is set(digit is in the range of 0 to 9 so add only 30h)
3) Sub 07h to AL register(If digit is in the range from A to F then add 30h and 7h both)
4) Sub 30h to AL register
5) Return
Algorithm for Output procedure:
1) Compare the contents of BL with 0Ah
2) Jump to step no 4 if carry flag is set(digit is in the range of 0 to 9 so add only 30h)
3) Add 07h to BL register(If digit is in the range from A to F then add 30h and 7h both)
4) Add 30h to BL register
5) Return

Note:

While masking F or f is not case sensitive. But in input procedure 41h number is considered for
comparison because 41h is ASCII hex value for ‘A’. In output procedure ‘0A’ is considered not
‘a’ is considered as small case a has 61h ASCII hex value.So this input and output procedure are
applicable for only capital ‘A’ to ‘F’
TASM Program :
Data segment

msg db 0dh,0ah,"Enter first number: $"


msg1 db 0dh,0ah,"Enter second number: $"
result db 0dh,0ah,"The Result is: $"

Data ends
Code segment
assume CS:Code,DS:Data
start:
mov ax,Data ; Move Data to Data Segment add8
mov DS,ax

mov dx,offset msg ; Display contents of variable msg


mov ah,09h
int 21h

mov ah,01h ; To accept input and store ASCII value into al


int 21h

sub al,30h ; Accept 10's place of the Number


mov bl,al
rol bl,4

mov ah,01h ; To accept input and store ASCII value into al


int 21h

sub al,30h ; Accept unit's place of Number

add bl,al ; Get the number by adding 10's and unit's place

mov dx,offset msg1 ; Display contents of variable msg1


mov ah,09h
int 21h

mov ah,01h ; To accept input and store ASCII value into al


int 21h

sub al,30h ; Accept 10's place of the Number


mov cl,al
rol cl,4

mov ah,01h ; To accept input and store ASCII value into al


int 21h

sub al,30h ; Accept unit's place of Number

add cl,al ; Get the number by adding 10's and unit's place

add bl,cl ; Add the two accepted Number's

mov dx,offset result ; Display contents of string result


mov ah,09h
int 21h

mov cl,bl ; Store the value of the Result

and bl,0f0h ; Isolate 10's place of Result


ror bl,4

call AsciiConv ; Convert to ASCII to display

mov dl,bl ; Display a Number/Alphabet


mov ah,02h
int 21h

mov bl,cl ; Retrieve original Result

and bl,0fh ; Isolate unit's place of Result

call AsciiConv ; Convert to ASCII to display

mov dl,bl ; Display a Number/Alphabet


mov ah,02h
int 21h

mov ah,4ch ; Terminate the program


int 21h

AsciiConv proc ; Compare to 0a if it is less than A then we need to add only


30
cmp bl,0ah ; If it is greater than or equal to 0a then we also need to add
07
jc skip
add bl,07h
skip: add bl,30h
ret
endp
Code ends
end start
output:-
C:\TASM\BIN>tasm add8.asm
Turbo Assembler Version 4.1 Copyright (c) 1988, 1996 Borland International

Assembling file: add8.asm


Error messages: None
Warning messages: None
Passes: 1
Remaining memory: 453k

C:\TASM\BIN>tlink add8.obj
Turbo Link Version 7.1.30.1. Copyright (c) 1987, 1996 Borland International
Warning: No stack

C:\TASM\BIN>add8

Enter first number: 13


Enter second number: 12
The Result is: 25
--------------------------------

You might also like