Scribd
Upload
58 views

SL No Tool Profile, P Rotation Al Speed, N Welding Speed, S Axial Load, F Tensile Strength, Mpa Yield Strength Mpa %error

The document appears to be reporting results from an experiment testing different parameters of rotation welding including tool profile, rotational speed, welding speed, and axial force. It provides the axial tensile strength, yield strength, and percent error for 27 experimental runs using various high, medium, and low settings for each parameter. It also defines the parameters, their notation, units of measurement, and the specific values tested for each parameter's low, medium, and high settings.

Uploaded by

saleem
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
58 views

SL No Tool Profile, P Rotation Al Speed, N Welding Speed, S Axial Load, F Tensile Strength, Mpa Yield Strength Mpa %error

The document appears to be reporting results from an experiment testing different parameters of rotation welding including tool profile, rotational speed, welding speed, and axial force. It provides the axial tensile strength, yield strength, and percent error for 27 experimental runs using various high, medium, and low settings for each parameter. It also defines the parameters, their notation, units of measurement, and the specific values tested for each parameter's low, medium, and high settings.

Uploaded by

saleem
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

SL TOOL ROTATION WELDING AXIAL TENSILE YIELD %ERROR

NO PROFILE, AL SPEED, SPEED, LOAD, STRENGTH STRENGTH


P N S F , MPa MPa

1 -1 -1 -1 -1 73.79 65.25 0.28


2 +1 -1 -1 -1 84.16 75.62 -0.20
3 -1 +1 -1 -1 79.00 70.46 0.00
4 +1 +1 -1 -1 87.12 79.54 -0.14
5 -1 -1 +1 -1 81.33 72.79 -0.41
6 +1 -1 +1 -1 87.96 80.33 0.05
7 -1 +1 +1 -1 84.29 76.66 -0.35
8 +1 +1 +1 -1 88.67 81.04 0.38
9 -1 -1 -1 +1 82.67 74.13 -0.81
10 +1 -1 -1 +1 90.79 83.16 0.23
11 -1 +1 -1 +1 85.13 77.50 -0.15
12 +1 +1 -1 +1 91.00 84.27 0.00
13 -1 -1 +1 +1 85.96 78.33 0.05
14 +1 -1 +1 +1 90.33 83.60 -0.37
15 -1 +1 +1 +1 86.16 79.43 -0.19
16 +1 +1 +1 +1 88.29 81.56 -0.33
17 -2 0 0 0 76.54 66.69 0.60
18 +2 0 0 0 89.04 83.58 -0.05
19 0 -2 0 0 82.71 72.86 0.35

20 0 +2 0 0 85.88 80.42 0.15


21 0 0 -2 0 82.88 72.48 0.15
22 0 0 +2 0 87.71 82.25 0.33
23 0 0 0 -2 85.04 75.19 -0.05
24 0 0 0 +2 93.54 88.08 0.49
25 0 0 0 0 103.14 95.98 0.82
26 0 0 0 0 103.14 94.97 -0.14
27 0 0 0 0 103.14 93.96 -1.12
28 0 0 0 0 103.14 94.97 -0.14
29 0 0 0 0 103.14 95.98 -0.14
30 0 0 0 0 103.14 94.97 -0.14
31 0 0 0 0 103.14 95.98 0.82
VERY VERY
LOW MEDIUM HIGH
NO PARAMETER NOTATION UNITS LOW HIGH
(-1) (0) (+1)
(-2) (+2)

Tool
1 P - SQ TRI PEN HEX SC
profile

Rotational
2 N rpm 800 1000 1200 1400 1600
Speed

Welding
3 S mm/min 30 60 90 120 150
speed
Axial
4 F kN 1 1.5 2 2.5 3
Force

You might also like