Scribd
Upload
81 views

Data Sheet Suction and Filter Cart SF 500

The SF 500 is a high-performance suction and filter cart for cleaning cooling lubricants, cutting oils, and varnishing liquids. It has a 500 liter main tank, 60 liter swarf chute, and can suction up to 250 liters per minute. Additional components include a vacuum-belt-filter, high pressure pump for cleaning, and centrifugal pump for evacuation. The unit is 2000mm long, 800mm wide, 1600mm tall and weighs 420kg.

Uploaded by

Vladimir Comsa
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
81 views

Data Sheet Suction and Filter Cart SF 500

The SF 500 is a high-performance suction and filter cart for cleaning cooling lubricants, cutting oils, and varnishing liquids. It has a 500 liter main tank, 60 liter swarf chute, and can suction up to 250 liters per minute. Additional components include a vacuum-belt-filter, high pressure pump for cleaning, and centrifugal pump for evacuation. The unit is 2000mm long, 800mm wide, 1600mm tall and weighs 420kg.

Uploaded by

Vladimir Comsa
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

SF 500

High-performance suction and filter cart for the cleaning of cooling


lubricants, cutting oils and varnishing liquids

System components:
SF 500 Unit Value
Housing
Capacity Compact-construction with self-supporting solid welded
Main tank ca. l 500 structure of 3 mm sheet steel
Out-and Inside coat of lacquer 2-K-lacquer
Swarf chute ca. l 60 (NCS-S 2010-R70B)
Dimension
Suction hose
Length mm 2000 Length 4,5 m, Ø 50 mm, suction tube 0,8 m, flat nozzle
Breadth mm 800 100 mm wide
Height mm 1600 Nozzle set
Weight kg 420 Reducer Ø 36 mm, extension tube Ø 36 mm length 440
mm, floor nozzle 400 mm wide, crevice nozzle
Suction height (stat.) mm WS 2800
Suction capacity l/min 250 Cleaning system
High pressure pump for cleaning of the emulsion tank
Temperature °C < 50 400 V – 2,6 kW
pH-value pH 5 - 9,5 8 m HD-hose, infinitely adjustable lance nozzle
0-70 bar
Noise level dB (A) 73
Electrical connection VA 400/16 Evacuation
3 Phases, Ground Hz 50 Centrifugal pump, 400 V – 0,55 kW
Evacuation hose
Connected load kW/A 7/16 Length 5 m, Ø 25mm with ball cock at the end of the hose

Vacuum-belt-filter
For the desposition of swarfs and particles
Fleece-Length 100 m

page 1 of 2
Components
SF 500:

Swarf chute complete


Useable as an independent industrial exhauster
3 m connection hose to the main-unit with to 2 C -
couplers

Supply point
16-A-cekon-connector
with 10 m current cable 5-pole
integrated phase inverter

Options

- Trailer draw bar


(The complete-length increases by 250 mm.)

- Cleaning hose special


Length 4 m
(For difficulty-accessible places, which one can not be
reached with the rigid lance, for example under the swarf
chute.)

- Cleaning opening at the rear


Dimensions: 420 x 150 mm
(We recommend this cleaning opening for the unpro-
blematic cleaning of the unit.)

- Cleaning door at the rear


Breadth: breadth of the tank, height: 500 mm
(We recommend this cleaning door for the unproblema-
tic cleaning of the unit.

- Wheel-set for extremely uneven ways

- Electrical actuation with battery and battery charger


(The Unit becomes longer around 378 mm, the weight
increases by 165 kg.)

Documentation
- Instruction sheet
- Spare part list
- Wiring diagram

Technical changes reserved


Date of last review 09/07 k/Datenblätter/Neue Datenblätter Ausland/500

page 2 of 2

You might also like