MEITRACK SMS Protocol

MEITRACK SMS Protocol

Applicable Model: MT90/MVT100/MVT340/MVT380/

MVT600/T1/T3/T333/MVT800/T322X/
TC68S/T355/T355G/T311/T622G/T366/T366G/
P99G/P66/T388G/T688
MEITRACK SMS Protocol

Change History
File Name MEITRACK SMS Protocol
Project MT90/MVT100/MVT340/MVT380/ Creation Date 2010-07-31
MVT600/T1/T3/T333/MVT800/T322X/ Update Date 2018-10-10
TC68S/T355/T355G/T311/T622G/T366/T366G/
P99G/P66/T388G/T688
Subproject SMS Protocol Total Pages 45
Version V2.3 Confidential Internal Documentation

Copyright © 2018 Meitrack Group All rights reserved. -2-

MEITRACK SMS Protocol

Contents
1 Command Format ...................................................................................................................................................... - 5 -
1.1 SMS Command Format ................................................................................................................................. - 5 -
1.2 Event Code and SMS Header ........................................................................................................................ - 6 -
2 Command List ............................................................................................................................................................ - 8 -
3 Command Details .................................................................................................................................................... - 10 -
3.1 Real-Time Location Query – A00 ................................................................................................................ - 10 -
3.2 Tracking by Time Interval (SMS) – A02 ........................................................................................................ - 11 -
3.3 Real-Time Longitude and Latitude Query – A10 ......................................................................................... - 11 -
3.4 Setting a Heartbeat Packet Reporting Interval (GPRS) – A11 ...................................................................... - 11 -
3.5 Tracking by Time Interval (GPRS) – A12 ...................................................................................................... - 12 -
3.6 Setting the Cornering Report – A13 ............................................................................................................ - 12 -
3.7 Tracking by Distance – A14 ......................................................................................................................... - 13 -
3.8 Setting the Parking Scheduled Tracking Function – A15 ............................................................................. - 13 -
3.9 Enabling the Parking Scheduled Tracking Function – A16........................................................................... - 13 -
3.10 Controlling Output 1 Status by RFID – A17 ............................................................................................... - 14 -
3.11 Waking the Device Up by Vibration – A19 ................................................................................................ - 15 -
3.12 Setting GPRS Parameters – A21 ................................................................................................................ - 15 -
3.13 Setting the DNS Server IP Address – A22 .................................................................................................. - 15 -
3.14 Setting the Standby GPRS Server – A23 .................................................................................................... - 16 -
3.15 Setting the Man Down Alert – A29 ........................................................................................................... - 16 -
3.16 Setting a Time Interval in Roaming Mode – A55 ....................................................................................... - 17 -
3.17 Reading All Authorized Phone Numbers – A70 ......................................................................................... - 18 -
3.18 Setting Authorized Phone Numbers – A71 ............................................................................................... - 18 -
3.19 Setting Listen-in Phone Numbers – A72 ................................................................................................... - 19 -
3.20 Setting the Smart Sleep Mode – A73 ........................................................................................................ - 19 -
3.21 Querying the SIM Card Balance – A75 ...................................................................................................... - 20 -
3.22 Setting APN Parameters – A81 .................................................................................................................. - 21 -
3.23 Setting the Maximum Working Time of the Woken GPS Module – A83 ................................................... - 21 -
3.24 Setting the Unit of the GPRS Data Interval – A84 ..................................................................................... - 22 -
3.25 Setting the Positioning Mode – A85 ......................................................................................................... - 22 -
3.26 Setting a Geo-Fence – B05 ........................................................................................................................ - 22 -
3.27 Deleting a Geo-Fence – B06 ...................................................................................................................... - 23 -
3.28 Setting the Speeding Alert – B07 .............................................................................................................. - 23 -
3.29 Setting the Towing Alert – B08.................................................................................................................. - 24 -
3.30 Setting the Vibration Sensitivity Level – B09 ............................................................................................ - 24 -
3.31 Fast Setting the Towing Alert – B10 .......................................................................................................... - 25 -
3.32 Setting a Polygonal Geo-Fence – B11........................................................................................................ - 25 -
3.33 Setting the Idling Alert – B14 .................................................................................................................... - 25 -
3.34 Setting Driver Fatigue Parameters – B15 .................................................................................................. - 26 -
3.35 Setting the Anti-Theft Function – B21 ...................................................................................................... - 27 -
3.36 Setting the Mileage and Speed Calculation Mode – B22 .......................................................................... - 27 -
3.37 Setting Filtering Time of an Input Port – B26 ............................................................................................ - 28 -

Copyright © 2018 Meitrack Group All rights reserved. -3-

MEITRACK SMS Protocol

3.38 Setting Auto Arming – B27........................................................................................................................ - 28 -

3.39 Turning off the LED Indicator – B31 .......................................................................................................... - 29 -
3.40 Setting a Log Interval – B34 ...................................................................................................................... - 29 -
3.41 Setting the SMS Time Zone – B35 ............................................................................................................. - 29 -
3.42 Setting the GPRS Time Zone – B36 ........................................................................................................... - 29 -
3.43 Setting the Auto Sleep Function – B37 ..................................................................................................... - 30 -
3.44 Setting the Auto Sleep Voltage – B38 ....................................................................................................... - 30 -
3.45 Setting the Roaming Table Switching Function – B43 ............................................................................... - 30 -
3.46 Determining Vehicle Status by ACC Status – B60 ...................................................................................... - 31 -
3.47 Setting the Fuel Filtering Function – B72 .................................................................................................. - 31 -
3.48 Setting SMS Event Characters – B91 ......................................................................................................... - 32 -
3.49 Setting Event Authorization – B99 ............................................................................................................ - 32 -
3.50 Controlling Output Status – C01 ............................................................................................................... - 33 -
3.51 Setting a GPRS Event Transmission Mode – C03 ....................................................................................... - 33 -
3.52 Setting I/O Port Status – C08 .................................................................................................................... - 34 -
3.53 SMS Display (LCD Display) – C11 ............................................................................................................... - 34 -
3.54 Setting the Fuel Theft Alert – C49 ............................................................................................................. - 35 -
3.55 Setting the Volume of Device's Microphone and Speaker – C69 .............................................................. - 35 -
3.56 Setting a Serial Port and a Peripheral – C70.............................................................................................. - 36 -
3.57 Powering Off the Device by Command – C76 ........................................................................................... - 36 -
3.58 Disabling the Power-off Function of the Power Button – C77 .................................................................. - 36 -
3.59 Setting the GSM Jamming Detection Function – C85 ............................................................................... - 36 -
3.60 Authorizing an RFID Card/iButton Key – D10 ............................................................................................ - 37 -
3.61 Authorizing RFID Cards/iButton Keys in Batches – D11 ............................................................................ - 38 -
3.62 Checking iButton/RFID Authorization – D12 ............................................................................................. - 38 -
3.63 Deleting an Authorized RFID Card/iButton Key – D14 .............................................................................. - 38 -
3.64 Deleting Authorized RFID Cards/iButton Keys in Batches – D15 ............................................................... - 38 -
3.65 Setting Idling Time – D34 .......................................................................................................................... - 39 -
3.66 Setting GPS Data Filtering – D71 ............................................................................................................... - 39 -
3.67 Setting Output Triggering – D72 ............................................................................................................... - 40 -
3.68 Allocating GPRS Cache and GPS Log Storage Space – D73 ........................................................................ - 40 -
3.69 Setting the Harsh Acceleration/Braking Alert – D78 ................................................................................. - 40 -
3.70 Setting Harsh Acceleration and Harsh Braking Parameters – D79 ............................................................ - 41 -
3.71 Setting Harsh Cornering Parameters – D80 .............................................................................................. - 42 -
3.72 Reading Device's Firmware Version and SN – E91 .................................................................................... - 42 -
3.73 Restarting the GSM Module – F01 ............................................................................................................ - 43 -
3.74 Restarting the GPS Module – F02 ............................................................................................................. - 43 -
3.75 Setting the Mileage and Run Time – F08 .................................................................................................. - 43 -
3.76 Deleting SMS/GPRS Cache Data – F09 ...................................................................................................... - 44 -
3.77 Backing up Device Parameters – F10 ........................................................................................................ - 44 -
3.78 Restoring Initial Settings – F11.................................................................................................................. - 44 -
3.79 Changing the Tracker Password – F20 ....................................................................................................... - 45 -
3.80 Initializing the Tracker Password – FAB ..................................................................................................... - 45 -

Copyright © 2018 Meitrack Group All rights reserved. -4-

MEITRACK SMS Protocol

1 Command Format

1.1 SMS Command Format

SMS command sent from a mobile phone to the tracker: Password,<Command type>,<Command text>
Note: The password has 4 digits. The default password is 0000.
SMS command sent from the tracker to a mobile phone:
Reply: IMEI,<Command type>,OK
Location report: SMS header,Date and time,Positioning status,GSM signal strength,Speed,Remaining battery
capacity,Map link
Note: If the MT90/T311/TC68S is installed with a Micro SD card that supports maps, the device will reply to a Chinese
address.
SMS example:
Now,110721 16:40,A,12,56Km/h,97%,http://maps.meigps.com/?lat=22.513015&lng=114.057235
Descriptions about SMS data are as follows:
Parameter Description Example
SMS header Indicates the SMS report type, including general reports or Now
various types of alert information. For details, see section Indicates the current location
1.2 "Event Code and SMS Header." report.
Date and time Format: YYMMDD hh:mm 110721 16:40
YY indicates year. Indicates 21 July 2011, 16:40
MM indicates month. pm.
DD indicates day.
hh indicates hour.
mm indicates minute.
Decimal
Indicates the GPS signal status. A
Positioning status
A = Valid; V = Invalid The GPS is valid.
GSM signal Value: 0–31 12
strength Decimal The signal strength is 12.
GPRS data can be sent successfully only when the value is
greater than 16.
Speed Unit: km/h 56
Decimal The speed is 56 km/h.
Remaining Indicates the remaining capacity of the built-in battery. 97%
battery capacity The remaining battery capacity
is 97%.
Map link Indicates the map link with a latitude and longitude. You can http://maps.meigps.com/?lat=
visit the website through a mobile phone. 22.513015&l ng=114.057235
lat indicates the latitude, and lng indicates the longitude. Latitude: 22.513015
If your mobile phone does not support HTTP, enter the Longitude: 114.057235
latitude and longitude in Google Maps (maps.google.com).
Query a location. (Note: The two digits placed before the

Copyright © 2018 Meitrack Group All rights reserved. -5-

MEITRACK SMS Protocol

decimal point are a latitude, and the three digits placed

before the decimal point are a longitude.)

1.2 Event Code and SMS Header

Event Code Event Default SMS Header (At Most 16 Bytes)

1 SOS Pressed SOS
2 Input 2 Active Ignition On: MVT100&MVT340&T322X
Door Open: MVT380&MVT600&T1&MVT800&T333&T3
In2 Active: Other models
3 Input 3 Active Ignition On: MVT600&T1&T333 &T3
Door Open: MVT800&T322X
In3 Active: Other models
4 Input 4 Active Ignition On: MVT380&MVT800
In4 Active: Other models
5 Input 5 Active In5 Active
9 Input 1 Inactive In1 Inactive
10 Input 2 Inactive Ignition Off: MVT100&MVT340&T322X
Door Close: MVT380&MVT600&T1&MVT800&T333&T3
In2 Inactive: Other models
11 Input 3 Inactive Ignition Off: MVT600&T1&T333&T3
Door Close: MVT800&T322X
In3 Inactive: Other models
12 Input 4 Inactive Ignition Off: MVT380&MVT800
In4 Inactive: Other models
13 Input 5 Inactive In5 Inactive: Other models
17 Low Battery Low Battery
18 Low External Battery Low Ext-Battery
19 Speeding Speeding
20 Enter Geo-fence Enter Fence N (N means the number of the fence)
21 Exit Geo-fence Exit Fence N (N means the number of the fence)
22 External Battery On Ext-Battery On
Tracker connected: TC68S
23 External Battery Cut Ext-Battery Cut
Tracker removed: TC68S
24 GPS Signal Lost GPS Signal Lost
25 GPS Signal Recovery GPS Recovery
26 Enter Sleep Enter Sleep
27 Exit Sleep Exit Sleep
28 GPS Antenna Cut GPS Antenna Cut
29 Device Reboot Power On
31 Heartbeat /

Copyright © 2018 Meitrack Group All rights reserved. -6-

MEITRACK SMS Protocol

32 Cornering Cornering
33 Track By Distance Distance
34 Reply Current (Passive) Now
36 Tow Tow
40 Power Off Power Off
44 GSM Jamming GSM Jamming
50 Temperature High Temp High
51 Temperature Low Temp Low
52 Full Fuel Full Fuel
53 Low Fuel Low Fuel
54 Fuel Theft Fuel Theft
56 Armed Armed
57 Disarmed Disarmed
58 Vehicle Theft Vehicle Theft
63 No GSM Jamming No GSM Jamming
78 Impact Impact
79 Fall Fall
80 Install Install
81 Drop Off Drop Off
82 Fuel Filling Fuel Filling
83 Ult-Sensor Drop Ult-Sensor Drop
90 Sharp Turn to Left Harsh Cornering
91 Sharp Turn to Right Harsh Cornering
94 Output 1 Active Out1 Active
95 Output 2 Active Out2 Active
96 Output 1 Inactive Out1 Inactive
97 Output 2 Inactive Out2 Inactive
129 Harsh Braking Harsh Braking
130 Harsh acceleration Fast Accelerate
133 Idle Overtime Idle Overtime
134 Idle Recovery Idle Recovery
135 Fatigue Driving Fatigue Driving
136 Enough Rest after Fatigue Enough Rest
Driving
138 Speed Recovery Speed Recovery
139 Maintenance Notice Maintenance
144 Ignition On Ignition On
145 Ignition Off Ignition Off

Note: Data in the above figure is the default settings before delivery. Default SMS headers can be modified by
Meitrack Manager or B91 command.

Copyright © 2018 Meitrack Group All rights reserved. -7-

MEITRACK SMS Protocol

2 Command List

Command Command Description Applicable Model

A00 Real-Time Location Query All models
A02 Tracking by Time Interval (SMS) Excluding T322X/P66
A10 Real-Time Longitude and Latitude Query All models
A11 Setting a Heartbeat Packet Reporting All models
Interval (GPRS)
A12 Tracking by Time Interval (GPRS) All models
A13 Setting the Cornering Report All models
A14 Tracking by Distance All models
A15 Setting the Parking Scheduled Tracking MVT100/340/380/600/800/T322X/T311/T3
Function T333/T1/T366/T366G/T662G/T388G/T688
A16 Enabling the Parking Scheduled Tracking MVT100/340/380/600/800/T311
Function T333/T1/T322X/T3/T366/T366G/T622G/T388G/T68
8
A17 Controlling Output 1 Status by RFID MVT600/T1/T333/T3/T366/T366G/T622G/T388G/T
688
A19 Waking the Device Up by Vibration MT90/MT90G/T355/T355G/P99G/P66
A21 Setting GPRS Parameters All models
A22 Setting the DNS Server IP Address Excluding T322X/T355/T355G/P66
A23 Setting the Standby GPRS Server Excluding T322X/P66
A29 Setting the Man Down Alert MT90/MT90G/P99G
A55 Setting a Time Interval in Roaming Mode Excluding T322X/T355/T355G/T622G
A70 Reading All Authorized Phone Numbers All models
A71 Setting Authorized Phone Numbers All models
A72 Setting Listen-in Phone Numbers Excluding
T322X/T355/T355G/T311/MVT100/MVT340/P66
A73 Setting the Smart Sleep Mode All models
A75 Querying the SIM Card Balance T1/MVT600/MT90/MT90G/MVT340/
MVT380/MVT100/P99G
A81 Setting APN Parameters P99G
A83 Setting the Maximum Working Time of the P99G
Woken GPS Module
A84 Setting the Unit of the GPRS Data Interval P99G
A85 Setting the Positioning Mode P99G
B05 Setting a Geo-Fence All models
B06 Deleting a Geo-Fence All models
B07 Setting the Speeding Alert All models
B08 Setting the Towing Alert Excluding T355/T355G/P66
B09 Setting the Vibration Sensitivity Level T366/T366G
B10 Fast Setting the Towing Alert T1/T333/T366/T366G/P99G

Copyright © 2018 Meitrack Group All rights reserved. -8-

MEITRACK SMS Protocol

B11 Setting a Polygonal Geo-Fence – B11 T1/T333/T366/T366G

B14 Setting the Idling Alert T1/T333/T366/T366G/T388G
B15 Setting Driver Fatigue Parameters T1/T333/T366/T366G/T388G
B21 Setting the Anti-Theft Function MVT100/MVT340/MVT380/MVT600/MVT800/T322
X/T1/T3/T333/TC68S/T355/T355G/T311/T622G/T3
66/T366G/T388G/T688
B22 Setting the Mileage and Speed Calculation T688
Mode
B26 Setting Filtering Time of an Input Port T1/T333/T366/T366G
B27 Setting Auto Arming T366/T366G
B31 Turning off the LED Indicator Excluding T322X/T355
B34 Setting a Log Interval Excluding MVT340/T322X
B35 Setting the SMS Time Zone All models
B36 Setting the GPRS Time Zone Excluding T355/T355G
B37 Setting the Auto Sleep Function T1/T333/T366/T366G
B38 Setting the Auto Sleep Voltage T1/T333/T366/T366G
B43 Setting the Roaming Table Switching T366/T366G
Function
B60 Determining Vehicle Status by ACC Status Excluding
T322X/MT90/MT90G/P99G/TC68S/T355/T355G/P6
6
B72 Setting the Fuel Filtering Function T1/T333
B91 Setting SMS Event Characters Excluding T322X/TC68S
B99 Setting Event Authorization All models
C01 Controlling Output Status Excluding
TC68S/P99G/MT90/MT90G/T355/T355G/P66/T322
X
C03 Setting a GPRS Event Transmission Mode Excluding T322X/T355/T355G/P66
C08 Setting I/O Port Status T366/T366G
C11 SMS Display (LCD Display) MVT600/T1/T333/T3
C49 Setting the Fuel Theft Alert MVT600/T1/MVT800/T333/T3/T366/T366G/T622G
/T388G/T688
C69 Setting the Volume of Device's Microphone T1/T333/P99G
and Speaker
C70 Setting a Serial Port and a Peripheral T1/T333/T366/T366G
C76 Powering Off the Device by Command P99G
C77 Disabling the Power-off Function of the P99G/T1/T333/T366/T366G
Power Button
C85 Setting the GSM Jamming Detection T1/T333/T366/T366G
Function
D10 Authorizing an RFID Card/iButton Key MVT600/T1/T333/T3/T366/T366G/T622G/T388G/T
688
D11 Authorizing RFID Cards/iButton Keys in MVT600/T1/T333/T3/

Copyright © 2018 Meitrack Group All rights reserved. -9-

MEITRACK SMS Protocol

Batches T366/T366G/T622G/T388G/T688
D12 Checking iButton/RFID Authorization MVT600/T1/T333/T3/
T366/T366G/T622G/T388G/T688
D14 Deleting an Authorized RFID Card/iButton MVT600/T1/T333/T3/
Key T366/T366G/T622G/T388G/T688
D15 Deleting Authorized RFID Cards/iButton MVT600/T1/T333/T3/
Keys in Batches T366/T366G/T622G/T388G/T688
D34 Setting Idling Time T366/T366G/T622G
D71 Setting GPS Data Filtering T366/T366G/T622G
D72 Setting Output Triggering T622G
D73 Allocating GPRS Cache and GPS Log Storage T366/T366G/T622G/P99G
Space
D78 Setting the Harsh Acceleration/Braking T366/T366G/T622G
Alert
D79 Setting Harsh Acceleration and Harsh T1/T333/T366/T366G
Braking Parameters
D80 Setting Harsh Cornering Parameters T1/T333/T366/T366G
E91 Reading Device's Firmware Version and SN All models
F01 Restarting the GSM Module Excluding T322X/P66
F02 Restarting the GPS Module Excluding T322X/P66
F08 Setting the Mileage and Run Time – F08 All models
F09 Deleting SMS/GPRS Cache Data All models
F10 Backing up Device Parameters P99G
F11 Restoring Initial Settings All models
F20 Changing the Tracker Password All models
FAB Initializing the Tracker Password All models

3 Command Details

3.1 Real-Time Location Query – A00

SMS Sending 0000,A00

SMS Reply Now,Date and time,Positioning status,GSM signal strength,Speed,Remaining battery
capacity,Map link
Description Query the current location of the tracker.
For details, see section 1.1 "SMS Command Format."
Applicable Model All models
Example
SMS Sending 0000,A00
SMS Reply Now,110721
16:40,V,12,56Km/h,97%,http://maps.meigps.com/?lat=22.513015&lng=114.057235

Copyright © 2018 Meitrack Group All rights reserved. - 10 -

MEITRACK SMS Protocol

3.2 Tracking by Time Interval (SMS) – A02

SMS Sending 0000,A02,Interval,Number of reporting times,Phone No.

SMS Reply IMEI,A02,OK
Description Interval = 0: The automatic SMS reporting function is disabled (default).
Interval = [1…65535]: The automatic SMS reporting function is enabled. Set the reporting
time interval. Unit: minute.
Number of reporting times = 0: uninterrupted data reporting (used in the platform).
Number of reporting times = [1…255]: Data won't stop reporting until the number of
reporting times reaches the preset value.
Phone No.: indicates the phone number where data is sent.
Applicable Model Excluding T322X/P66
Example
SMS Sending 0000,A02,10,0
SMS Reply 353358017784062,A02,OK
After the above command is run successfully, the preset phone number will receive an SMS
with positioning information every 10 minutes.
Interval,110721
16:40,V,12,56Km/h,97%,http://maps.meigps.com/?lat=22.513015&lng=114.057235

3.3 Real-Time Longitude and Latitude Query – A10

SMS Sending 0000,A10

SMS Reply IMEI,Now,<->Latitude,<->Longitude,Date and time,Positioning status,Number of
satellites,GSM signal strength,Speed,Direction,Horizontal dilution of precision
(HDOP),Altitude,Mileage,Run time,,I/O port status,,
Description Query the current location of the tracker. The reply content is in longitude and latitude
format.
When you run the A10 command, if the tracker's GPRS function has been enabled and
parameters are correct, the tracker will send a piece of GPRS location data whose event
code is 34 to the server.
The function is available for users who implement platform tracking using an SMS
modem.
Applicable Model All models
Example
SMS Sending 0000,A10
SMS Reply 353358017784062,Now,22.535888,114.063034,080310161834,A,9,27,30,179,0,15,8890
,1346,,0000,,

3.4 Setting a Heartbeat Packet Reporting Interval (GPRS) – A11

SMS Sending 0000,A11,Interval

SMS Reply A11,OK/<Error code>

Copyright © 2018 Meitrack Group All rights reserved. - 11 -

MEITRACK SMS Protocol

Description Unit: minute. The maximum value of the interval is 65535. When the interval is 0, the
function is disabled (default).
The heartbeat function is available only in conjunction with deep sleep mode. When the
device enters deep sleep mode, a heartbeat packet will be sent at the specified interval.
A heartbeat packet is to confirm the device is online, and positioning data is invalid.
Applicable Model All models
Example
SMS Sending 0000,A11,30
SMS Reply IMEI,A11,OK
After the above command is run successfully, the tracker will send a GPRS heartbeat
packet whose event code is 31 to the platform every 30 minutes in sleep mode.

3.5 Tracking by Time Interval (GPRS) – A12

SMS Sending 0000,A12,Interval

SMS Reply IMEI,A12,OK
Description Note: If data needs to be sent at a specific time interval after the vehicle starts or stops,
the function needs to work with the A15 function. For details, see A15 and A16
commands.
Set the GPRS tracking time interval.
Interval unit: x10 seconds
Interval = 0: function disabled.
The maximum time interval is 65535 x 10 seconds.
Applicable Model All models
Example
SMS Sending 0000,A12,6
SMS Reply 353358017784062,A12,OK

3.6 Setting the Cornering Report – A13

SMS Sending 0000,A13,Angle

SMS Reply IMEI,A13,OK
Description When the driving angle exceeds the preset value, the tracker will send an SMS with
location information to the authorized phone number.
Angle = 0: function disabled (default).
Angle = [1…359]: function enabled.
For the T322X, 15 is recommended.
For other trackers, 30 is recommended.
Applicable Model All models
Example
SMS Sending 0000,A13,30
SMS Reply 353358017784062,A13,OK

Copyright © 2018 Meitrack Group All rights reserved. - 12 -

MEITRACK SMS Protocol

3.7 Tracking by Distance – A14

SMS Sending 0000,A14,Distance

SMS Reply IMEI,A14,OK
Description Distance = 0: function disabled (default).
Distance = [1…65535]: function enabled. Unit: meter.
Note: When both the GPRS time interval and distance tracking functions have been set,
the "first reach first report" rule will be applied, and then both the time interval and
distance counters will be reset to 0. For example, set the time interval to 6 x 10 seconds
and distance to 200 meters. If the road is clear and the driving time is less than 1 minute,
a distance data packet will be reported first; if there is heavy traffic on the road and the
vehicle only drives 100 meters within 1 minute, a time interval data packet will be
reported first.
Applicable Model All models
Example
SMS Sending 0000,A14,1000
SMS Reply 353358017784062,A14,OK
After the above command is run successfully, if the driving distance reaches 1000 meters,
the tracker will send a data packet to the preset authorized phone number.
Distance,110721
16:40,V,12,56Km/h,97%,http://maps.meigps.com/?lat=22.513015&lng=114.057235

3.8 Setting the Parking Scheduled Tracking Function – A15

SMS Sending 0000,A15,Interval

SMS Reply IMEI,A15,OK
Description The function is available for vehicle trackers only. With the function, the number of GPRS
messages is reduced, and thus GPRS traffic is saved.
After the A15 function is set, the A16 function will be automatically enabled. For details
about engine status, see section 3.9 "Enabling the Parking Scheduled Tracking Function –
A16."
Interval unit: x10 seconds
Interval = 0: function disabled.
The maximum time interval is 65535 x 10 seconds.
Applicable Model MVT100/340/380/600/800/T322X/T311/T333/T1/T3/T366/T366G/T662G/T388G/T688
Example
SMS Sending 0000,A15,6
SMS Reply 353358017784062,A15,OK

3.9 Enabling the Parking Scheduled Tracking Function – A16

SMS Sending 0000,A16,Status

SMS Reply IMEI,A16,OK

Copyright © 2018 Meitrack Group All rights reserved. - 13 -

MEITRACK SMS Protocol

Description Related input ports (high level) of vehicle trackers must be connected to engine
detection. Otherwise, the function is unavailable. The first positive input port of vehicle
trackers are as follows:
Tracker Model First Positive Input
MVT100 Input 2
MVT340 Input 2
MVT380 Input 4
MVT600 Input 3
T1/T333/T3 Input 3
MVT800 Input 4
T322X Input 2
T366/T366G Input 2
T622G Input 3
T388G Input 3
T688 Input 3

When the status value is 1, the parking scheduled tracking function is enabled, and GPRS
data is sent at the following interval:
 Engine on: Data is sent at the interval of the A12 command.
 Engine off: Data is sent at the interval of the A15 command.
When the status value is 0, the parking scheduled tracking function is disabled, and GPRS
data is sent at the following interval:
 Engine on: Data is sent at the interval of the A12 command.
 Engine off: Data is sent at the interval of the A12 command.
Note: The TC68S can determine whether the engine is activated based on vehicle voltage.
Applicable Model MVT100/340/380/600/800/T311/T333/T1/T322X/T3/T366/T366G/T622G/T388G/T688
Example
SMS Sending 0000,A16,0
SMS Reply 353358017784062,A16,OK

3.10 Controlling Output 1 Status by RFID – A17

SMS Sending 0000,A17,X

SMS Reply IMEI,A17,OK
Description X = 1: function enabled. Before using the function, you must ensure: 1. ACC detection is
connected to input 3; 2. A RFID card has been authorized.
X = 0: function disabled (default).
For example, after swiping the authorized RFID card, you must start the engine (input 3
connects to engine detection) within 1 minute. If the time exceeds 1 minute, you need to
swipe the card again. After the engine is started, input 3 will always detect the ACC status.
If ACC ON is detected (that is, input 3 is the high level), output 1 will not generate data. If
ACC OFF is detected, after 1 minute, swipe the authorized RFID card to start the engine
as required.

Copyright © 2018 Meitrack Group All rights reserved. - 14 -

MEITRACK SMS Protocol

Note:
1. If the function is enabled, output 1 will be activated.
2. For the T366/T366G tracker, the ACC detection is connected to input 2.
3. For the T366/T366G tracker, you must set the RFID event under the output 1 column
on the Meitrack Manager software. Otherwise, the function will be unavailable.
4. 4. For details about how to authorize a RFID, see commands D10–D15.
Applicable Model MVT600/T1/T333/T3/T366/T366G/T622G/T388G/T688
Example
SMS Sending 0000,A17,0
SMS Reply 353358017784062,A17,OK

3.11 Waking the Device Up by Vibration – A19

SMS Sending 0000,A19,X

SMS Reply IMEI,A19,OK
Description This function is used to determine whether the device can be woken up from the deep
mode by vibration.
X = 0: The device cannot be woken up by vibration.
X = 1: The device can be woken up by vibration (default).
Applicable Model MT90/MT90G/T355/T355G/P99G/P66
Example
SMS Sending 0000,A19,0
SMS Reply 353358017784062,A19,OK

3.12 Setting GPRS Parameters – A21

SMS Sending 0000,A21,Connection mode,IP address,Port,APN,APN user name,APN password

SMS Reply IMEI,A21,OK
Description Connection mode = 0: function disabled.
Connection mode = 1: function enabled; use the TCP/IP reporting mode.
Connection mode = 2: function enabled; use the UDP reporting mode.
IP address: IP address or domain name. A maximum of 32 bytes are supported.
Port: a maximum of 5 digits.
APN/APN user name/APN password: a maximum of 32 bytes respectively.
If no user name and password are required, leave them blank.
Applicable Model All models
Example
SMS Sending 0000,A21,1,server.meigps.com,8800 ,CMNET,,
SMS Reply 353358017784062,A21,OK

3.13 Setting the DNS Server IP Address – A22

SMS Sending 0000,A22,DNS server IP address

Copyright © 2018 Meitrack Group All rights reserved. - 15 -

MEITRACK SMS Protocol

SMS Reply IMEI,A22,OK

Description An incorrect DNS server IP address may lead to GPRS data reporting failures after the A21
command is used. You can use the A22 command to set the DNS server IP address
(confirm the IP address with your domain name provider), and then use the A21
command to reset the domain name.
DNS server IP address: a maximum of 16 bytes
Applicable Model Excluding T322X/T355/T355G/P66
Example
SMS Sending 0000,A22,202.105.21.232
SMS Reply 353358017784062,A22,OK
The command is used to set the Oray DNS server IP address.

3.14 Setting the Standby GPRS Server – A23

SMS Sending 0000,A23,IP address,Port

SMS Reply IMEI,A23,OK
Description IP address: a maximum of 32 bytes
Port: a maximum of 5 digits
When the tracker fails to send data to the active server set by command A21, data will be
automatically sent to the standby server to prevent data loss.
Applicable Model Excluding T322X/P66
Example
SMS Sending 0000,A23, 182.92.69.175,8800
SMS Reply 353358017784062,A23,OK

3.15 Setting the Man Down Alert – A29

SMS Sending 0000,A29,Switch,Time,Grade

SMS Reply IMEI,A29,OK
Description 1. Switch: Whether to enable the man down alert detection function. The value is 0
or 1. When the parameter value is 1, the man down alert function is enabled.
When the parameter value is 0, the man down alert function is disabled. The
default value is 0.
2. Time: indicates the buzzing and vibration time after the device falls to the ground.
During this period, you can press any button of the device to clear the alert, so as
to avoid misinformation. If no button is pressed during this period, a man down
alert will be generated or the tracker will call the designated contact. Unit: second;
value range: 0–255; default value: 10.
3. Grade: indicates the man down alert level. Its value ranges from 0 to 3 and it is in
decimal format. The default value is 1. The smaller the value is, the higher the alert
probability is.
Applicable Model MT90/MT90G/P99G
Example

Copyright © 2018 Meitrack Group All rights reserved. - 16 -

MEITRACK SMS Protocol

SMS Sending 0000,A29,1,10,1,0

SMS Reply 353358017784062,A29,OK

3.16 Setting a Time Interval in Roaming Mode – A55

SMS Sending 0000,A55,Scheduled mode,T1,T2,T3,T4

SMS Reply IMEI,A55,<Scheduled mode,T1,[T2],[T3],[T4]>
Description 1. Scheduled mode: decimal. Its value is the combinations of ACC ON, ACC OFF, Local,
and Roaming.
 T1: indicates the data uploading interval which is not restricted by ACC ON
and roaming. The functions are the same as that of A12.
 T2: indicates the data uploading interval when ACC OFF or ACC OFF in Local
mode.
 T3: indicates the data uploading interval when ACC ON in Roaming mode, or
the interval which is not restricted by roaming when ACC OFF.
 T4: indicates the data uploading interval when ACC OFF in Roaming mode.
2. The following combined scheduled modes are supported:
 Mode 0 (T1): The functions are the same as that of A12. All data will be
uploaded at the T1 interval. The command format is A55,0,T1. Other
parameters such as T2 and T3 will be invalid.
 Mode 1 (T1 + T2): The functions are the same as that of A12 and A15. In this
mode, parameter T1 is used as the data uploading interval when ACC ON,
and parameter T2 is used as the data uploading interval when ACC OFF. The
command format is A55,1,T1,T2.
 Mode 2 (T1 + T3): In Local mode, parameter T1 is used as the data uploading
interval. In roaming mode, parameter T3 is used as the data uploading
interval. The command format is A55,2,T1,T3.
 Mode 3 (T1 + T3 + T4): In Local mode, parameter T1 is used as the data
uploading interval and the interval is not restricted by the engine status. In
roaming mode, when the engine starts, parameter T3 is used as the data
uploading interval; when the engine stops, parameter T4 is used as the data
uploading interval. The command format is A55,3,T1,T3,T4.
 Mode 4 (T1 + T2 + T3 + T4): In Local mode, when the engine starts,
parameter T1 is used as the data uploading interval; when the engine stops,
parameter T2 is used as the data uploading interval. In Roaming mode, when
the engine starts, parameter T3 is used as the data uploading interval; when
the engine stops, parameter T4 is used as the data uploading interval.
3. After a GPRS interval is set by using the A55 command, the tracker will reply to the
interval parameters. If you want to read the tracker's GPRS interval parameters,
send 0000,A55 only.
Applicable Model
Tracker Model Mode 0 Mode 1 Mode 2 Mode 3 Mode 4
T1/T333/T3 √ √ √ √ √

Copyright © 2018 Meitrack Group All rights reserved. - 17 -

MEITRACK SMS Protocol

MVT600 √ √ √ √ √
MVT800 √ √ √ √ √
MVT340/380 √ √ √ √ √
MVT100 √ √ √ √ √
MT90/P99G √ √
TC68S √ √
T355/T355G √ √ √ √ √
T366/T366G √ √ √ √ √
T388G √ √ √ √ √
T688 √ √ √ √ √
Example
SMS Sending 0000,A55,0.6
SMS Reply 353358017784062,A55,0,6

3.17 Reading All Authorized Phone Numbers – A70

SMS Sending 0000,A70

SMS Reply IMEI,A70,Authorized phone number 1,Authorized phone number 2,Authorized phone
number 3,Listen-in phone number 1,Listen-in phone number 2
Description Read all authorized phone numbers.
Applicable Model All models
Example
SMS Sending 0000,A70
SMS Reply 353358017784062,A70,13811111111,13822222222,13833333333,13844444444,13855
555555

3.18 Setting Authorized Phone Numbers – A71

SMS Sending 0000,A71,Phone number 1,Phone number 2,Phone number 3

SMS Reply IMEI,A71,OK
Description Phone number: A phone number has a maximum of 16 bytes. If no phone numbers are
set, leave them blank. Phone numbers are empty by default.
Phone number 1/2/3: SOS phone numbers. When you call the tracker by using these
phone numbers, you will receive SMS notification about location information, geo-fence
alert and low power alert.
When the SOS button is pressed, the tracker will dial phone numbers 1, 2, and 3 in
sequence. It will stop dialing when a phone number responds.
Note: If no phone numbers are set and commas are remained, phone numbers set before
will be deleted. In addition, alert events will be overlapped.
If you need to delete all authorized phone numbers, send 0000,A71.
Applicable Model All models
Example

Copyright © 2018 Meitrack Group All rights reserved. - 18 -

MEITRACK SMS Protocol

SMS Sending 0000,A71,13811111111,13822222222,13833333333

SMS Reply 353358017784062,A71,OK

3.19 Setting Listen-in Phone Numbers – A72

SMS Sending 0000,A72,Listen-in phone number 1,Listen-in phone number 2

SMS Reply IMEI,A72,OK
Description When you call the tracker by using authorized listen-in phone numbers, the tracker will
answer the call automatically and enter the listen-in state. In this way, the tracker will not
make any sound.
Listen-in phone number: A maximum of two phone numbers can be set. Each phone
number has a maximum of 16 digits. If no phone numbers are set, leave them blank.
Phone numbers are empty by default.
If no phone numbers are set and commas are remained, phone numbers set before will
be deleted.
If you need to delete all listen-in phone numbers, send 0000,A72.
Applicable Model Excluding T322X/T355/T355G/T311/MVT100/MVT340/P66
Example
SMS Sending 0000,A72,13844444444,13855555555
SMS Reply 353358017784062,A72,OK

3.20 Setting the Smart Sleep Mode – A73

SMS Sending 0000,A73,Sleep level

SMS Reply IMEI,A73,OK
Description Set the automatic smart sleep mode when the tracker is idle.
Sleep level = 0: function disabled (default).
Sleep level = 1: normal sleep. The GSM module always works, and the GPS module
occasionally enters the sleep mode. The tracker works 25% longer in the normal sleep
mode than that in the normal working mode. This mode is not recommended for short
interval tracking; this will affect the route precision.
Sleep level = 2: deep sleep. If no event is triggered after five minutes, the GPS module will
stop working and the GSM module will enter sleep mode. Once an event is triggered, the
GPS and GSM modules will be woken up. The above actions will be cycled. A heartbeat
event will be triggered only in the deep sleep mode and is uploaded every one hour by
default.
Triggering events include: SOS alert, low internal/external battery, external power status,
GPS antenna cutoff alert, towing alert, high temperature, low temperature, fuel theft,
vehicle theft, ACC ON, (button) changes on any input port, vibration, incoming call, SMS
receiving, call, and heartbeat event (The GPS is invalid during heartbeat wakeup.).
Note:
1. By default, the MT90/MT90G cannot be woken up by vibration. You can use the A19
command to wake the MT90/MT90G up.

Copyright © 2018 Meitrack Group All rights reserved. - 19 -

MEITRACK SMS Protocol

2. If no event (drop/incoming call/SMS/vibration) is triggered after five minutes, the

T355 will enter deep sleep mode by default, and the GPS and 2G/3G modules will
stop working. In this way, a triggering event (drop/vibration) can wake the device
up, and then the device will enter working mode. GPS and 2G/3G modules can be
started intelligently based on vehicle status, and thus to save power.
In deep sleep mode, the T355 can be woken up only when the tracker drops or
vibrates. If a vibration event is triggered, sleep level 0 will be enabled. In the device
running mode, sleep level 0 or 2 will be enabled alternatively. In sleep mode, the
scheduled tracking and distance tracking functions will be disabled. If a drop event
is triggered, the sleep mode will be disabled. The device does not enter the deep
sleep mode until it is installed into the vehicle again.
3. After the T322X stops working for 15 minutes, it automatically enters the power-
saving sleep mode. In this way, the GPS module does not work, and the T322X does
not upload tracking data at a regular interval. Instead, the T322X sends a heartbeat
data packet (GPS invalid) to the platform every 60 minutes by default. The interval
for sending heartbeat packets can be changed. If the T322X vibrates, the T322X will
be woken up, continue to work normally, and report data including heartbeat
packets at a regular interval.
4. In any condition, you can use an SMS or a GPRS command to disable the sleep
mode, and then the tracker exits the sleep mode and returns back to the normal
working mode.
Applicable Model All models
Example
SMS Sending 0000,A73,2
SMS Reply 353358017784062,A73,OK

3.21 Querying the SIM Card Balance – A75

SMS Sending 0000,A75,<Ussd code>/<Type,Code/Num,Content>

SMS Reply IMEI,A75,<content>
Description 1. Support three querying methods: USSD command, calling (do not support voice
menus), and SMS.
2. Parameters will not be saved. Querying commands are as follows:
1) Type: indicates the service type (USSD, call, and SMS). The letters can be detected
when they are uppercase.
2) Code: indicates the USSD command code for balance query.
3) Num: indicates the phone number.
4) Content: indicates the text for SMS query.
5) Ussd code: indicates the USSD code text for balance query.
Example:
A75,*120#<Send a USSD command to query the balance. The command will be
directly forwarded to the preset phone number.>

Copyright © 2018 Meitrack Group All rights reserved. - 20 -

MEITRACK SMS Protocol

A75,ussd,*120#<Send a USSD command to query the balance. The command will be

directly forwarded to the preset phone number.>
A75,call,1008611<Make a call to query the balance. Forward an SMS to the preset
phone number or platform.>
A75,call,10010111<Make a call to query the balance. Forward an SMS to the preset
phone number or platform.>
A75,sms,10010,cxye<Send an SMS to query the balance. Parse the long SMS by PDU
UCS2. Forward the SMS to the platform or the preset phone number.>
3. The query results will be sent to the preset phone number or platform by PDU UCS2.
Trackers need to support long SMSs.
Applicable Model T1/MVT600/MT90/MT90G/MVT340/MVT380/MVT100/P99G
Example
SMS Sending 0000, A75,*120#
SMS Reply A75,Saldo 37,71kr. Kortet giltigt till 2014-07-03. Basprislista 1,99kr/min till alla och sms
0,99 kr/st. Ladda f|r att ringa billigare, se telia.se/refill.

3.22 Setting APN Parameters – A81

SMS Sending 0000,A81, APN,APN-USNAME,APN-PASSWD

SMS Reply IMEI,A81,OK
Description APN: less than 32 bytes
APN-USNAME: indicates the APN user name; a maximum of 32 bytes.
APN-PASSWD: indicates the APN password; a maximum of 32 bytes.
For example: "0000,A81,CMNET,,", which indicates that the APN is CMNET, and the user
name and password stay unchanged.
Note: The command format must be complete. (Three commas are a must). If there is a
parameter placed after a comma, it means that the parameter will be changed. If there is
no parameter placed after a comma, the parameter stays unchanged.
Applicable Model P99G
Example
SMS Sending 0000,A81,CMNET,,
SMS Reply 353358017784062,A81,OK

3.23 Setting the Maximum Working Time of the Woken GPS Module – A83

SMS Sending 0000,A83,X

SMS Reply IMEI,A83,OK
Description X: indicates the maximum working time of the GPS module woken up by a heartbeat
packet. Decimal; value range: 0–255; unit: minute.
X = 0 (default): After the GPS module is woken up by a heartbeat packet, it does not work
and the GPS is invalid.
Applicable Model P99G
Example

Copyright © 2018 Meitrack Group All rights reserved. - 21 -

MEITRACK SMS Protocol

SMS Sending 0000,A83,1

SMS Reply 353358017784062,A83,OK
After the command is sent successfully and the GPS module is woken up by a heartbeat
packet:
 If the GPS is valid within 1 minute, a heartbeat packet with valid GPS will be
uploaded.
 If the GPS is invalid within 1 minute, a heartbeat packet with invalid GPS will be
uploaded.

3.24 Setting the Unit of the GPRS Data Interval – A84

SMS Sending 0000,A84,X

SMS Reply IMEI,A84,OK
Description X: indicates the unit of the GPRS data interval. Decimal; value range: 0–255; unit: second.
For the P99G, the default unit is 10 seconds.
Applicable Model P99G
Example
SMS Sending 0000,A84,1
SMS Reply 353358017784062,A84,OK

3.25 Setting the Positioning Mode – A85

SMS Sending 0000,A85,X

SMS Reply IMEI,A85,OK
Description X: indicates the device's positioning mode. Decimal; value range: 0–3.
X = 0: GPS + LBS positioning
X = 1: WiFi + LBS positioning
X = 2: GPS + WiFi + LBS positioning
X = 3: LBS positioning
Applicable Model P99G
Example
SMS Sending 0000,A85,1
SMS Reply 353358017784062,A85,OK

3.26 Setting a Geo-Fence – B05

SMS Sending 0000,B05,Geo-fence number,Latitude,Longitude,Radius,Enter Geo-fence alert,Exit Geo-

fence alert
SMS Reply IMEI,B05,OK
Description Geo-fence number: The parameter value ranges from 1 to 8. A maximum of eight geo-
fences can be set.
Latitude: latitude of the geo-fence center; decimal; accurate to six digits placed after the

Copyright © 2018 Meitrack Group All rights reserved. - 22 -

MEITRACK SMS Protocol

decimal point. If there are only four digits placed after the decimal point, add two digits 0.
Otherwise, the command cannot be used successfully.
Longitude: longitude of the geo-fence center; decimal; accurate to six digits placed after
the decimal point. If there are only four digits placed after the decimal point, add two
digits 0. Otherwise, the command cannot be used successfully.
Radius: The value ranges from 1 to 4294967295. The unit is meter. Take coordinates of the
above latitude and longitude as the center point and draw a circle with this radius.
Enter Geo-fence alert = 0: function disabled.
Enter Geo-fence alert = 1: function enabled.
Exit Geo-fence alert = 0: function disabled.
Exit Geo-fence alert = 1: function enabled.
Applicable Model All models
Example
SMS Sending 0000,B05,1,22.913191,114.079882,1000,0,1
SMS Reply 353358017784062,B05,OK
When the tracker exits the geo-fence (latitude: 22.913191; longitude: 114.079882;
radius: 1000 meters), it will send the following alert information to the preset authorized
phone number:
ExitGEO,110721
16:40,V,12,56Km/h,97%,http://maps.meigps.com/?lat=22.513015&lng=114.057235

3.27 Deleting a Geo-Fence – B06

SMS Sending 0000,B06,Geo-fence number

SMS Reply IMEI,B06,OK
Description Geo-fence number: The parameter value ranges from 1 to 8. Only one geo-fence can be
deleted each time by SMS or GPRS command.
Applicable Model All models
Example
SMS Sending 0000,B06,1
SMS Reply 353358017784062,B06,OK

3.28 Setting the Speeding Alert – B07

SMS Sending 0000,B07,Driving speed

SMS Reply IMEI,B07,OK
Description Driving speed = 0: function disabled (default).
Driving speed = [1…255]: function enabled. Unit: km/h. When the driving speed reaches
the preset value, a speeding alert will be generated.
Applicable Model All models
Example
SMS Sending 0000,B07,60

Copyright © 2018 Meitrack Group All rights reserved. - 23 -

MEITRACK SMS Protocol

SMS Reply 353358017784062,B07,OK

After the above command is run successfully, if the tracker's driving speed reaches 60
km/h, the tracker will send the following alert information to the preset authorized phone
number:
Speeding,110721
16:40,V,12,61Km/h,97%,http://maps.meigps.com/?lat=22.513015&lng=114.057235

3.29 Setting the Towing Alert – B08

SMS Sending 0000,B08,Consecutive vibration time

SMS Reply IMEI,B08,OK
Description When the tracker is in deep mode and it's consecutive vibration time exceeds the preset
value, the tracker will send an alert to an authorized phone number or the server. Before
using the towing alert function, use the A73 command to set the smart sleep level to 2
and use the B08 command to set the consecutive vibration time. Otherwise, the towing
alert function will be unavailable.
Consecutive vibration time = 0: function disabled (default).
Consecutive vibration time = [1…255]: function enabled. Unit: second.
Applicable Model Excluding T355/T355G/P66
Example
SMS Sending 0000,B08,3
SMS Reply 353358017784062,B08,OK
After the above command is run successfully, if the tracker vibrates for more than three
consecutive seconds, the tracker will send the following alert information to the preset
authorized phone number:
Tow,110721
16:40,V,12,56Km/h,97%,http://maps.meigps.com/?lat=22.513015&lng=114.057235

3.30 Setting the Vibration Sensitivity Level – B09

SMS Sending 0000,B09,Sensitivity level

SMS Reply IMEI,B09,OK
Description The vibration sensitivity level is used to detect whether the tracker stops moving, starts
moving or is woken up by vibration, or a towing alert is generated.
Sensitivity level: The parameter value ranges from 1 to 65535. The parameter value
cannot be 0. The smaller the parameter value is, the stronger the sensitivity is. The default
value is 1.
Applicable Model T366/T366G
Example
SMS Sending 0000,B09,1
SMS Reply 353358017784062,B09,OK

Copyright © 2018 Meitrack Group All rights reserved. - 24 -

MEITRACK SMS Protocol

3.31 Fast Setting the Towing Alert – B10

SMS Sending 0000,B10,Consecutive vibration time,Idling time

SMS Reply IMEI,B10,OK
Description Consecutive vibration time = 0: function disabled (default).
Consecutive vibration time = [1…255]: function enabled. Unit: second.
Idling time: The default value is 2. Unit: minute.
Idling time = 0: The deep sleep mode will be disabled.
Idling time = [1…255]: The power-saving function will be enabled. When the idling time
exceeds the preset value, the tracker will enter deep sleep mode.
Applicable Model T1/T333/T366/T366G/P99G
Example
SMS Sending 0000,B10,10,5
SMS Reply 353358017784062,B10,OK

3.32 Setting a Polygonal Geo-Fence – B11

SMS Sending 0000,B11,Geo-fence number,Latitude 1,Longitude 1,Latitude 2,Longitude 2...Latitude

N,Longitude N,Enter Geo-fence alert,Exit Geo-fence alert
SMS Reply IMEI,B11,OK
Description Geo-fence number: The parameter value ranges from 1 to 8. (The maximum value varies
depending on customization projects.)
Latitude: accurate to 6 digits placed after the decimal point. For example, 22.512517 or -
22.512517.
Longitude: accurate to 6 digits placed after the decimal point. For example, 114.057200
or -114.057200.
Enter Geo-fence alert: The parameter value is 0 or 1.
 0: An alert will not be generated when the tracker enters the geo-fence.
 1: An alert will be generated when the tracker enters the geo-fence.
Exit Geo-fence alert: The parameter value is 0 or 1.
 0: An alert will not be generated when the tracker exits the geo-fence.
 1: An alert will be generated when the tracker exits the geo-fence.
If the command only contains the parameter Geo-fence number, related geo-fences will
be deleted.
Applicable Model T1/T333/T366/T366G
Example
SMS Sending 0000,B11,1,22.526922,114.052695,22.526946,114.056232,22.523720,114.053521,1,1
SMS Reply 353358017784062,B11,OK

3.33 Setting the Idling Alert – B14

SMS Sending 0000,B14,Time (second),Speed (km/h)

SMS Reply IMEI,B14,OK

Copyright © 2018 Meitrack Group All rights reserved. - 25 -

MEITRACK SMS Protocol

Description The command is used to detect whether an idling alert is generated. The tracker must be
connected to ACC detection. Otherwise, the function will be unavailable.
Time: indicates the consecutive time for the speed. The parameter value ranges from 0
to 60000. Unit: second.
Speed: The parameter value ranges from 0 to 200. Unit: km/h. (5 km/h is recommended.)
An idling alert will be generated when the following conditions are met simultaneously:
the device detects that the ACC is on; the speed is smaller than the preset value; and the
consecutive time for the speed is larger than the preset value.
If you want to read the parameters, send B14.
Note: The alert activation conditions may be affected due to static drift. Therefore, you
are advised to set the speed to a value between 5 km to 10 km and the consecutive time
for the speed to a value that is larger than 60 seconds.
Applicable Model T1/T333/T366/T366G/T388G
Example
SMS Sending 0000,B14,60,5
SMS Reply 353358017784062,B14,OK

3.34 Setting Driver Fatigue Parameters – B15

SMS Sending 0000,B15,Consecutive driving time (minute),Reserved value,Rest time (minute),Related to

speed or not
SMS Reply IMEI,B15,OK
Description The command is used to detect driver fatigue.
Consecutive driving time: The parameter value ranges from 0 to 1000. Unit: minute.
When the consecutive driving time exceeds the preset value, driver fatigue detection will
be activated.
Reserved value: Leave the parameter blank for later use.
Rest time: The parameter value ranges from 0 to 1000. Unit: minute. Drivers must have a
rest based on the preset time. When the tracker detects that the ACC is off or the speed
is 0, the driver fatigue alert will be cleared.
Related to speed or not: The parameter value is 0 or 1. 0: The driving status is related to
the ACC only. 1: The driving status is related to the ACC and speed.
Each parameter can be set separately, and the commas in this command need to be
remained. For example, the command for setting the parameter Related to speed or not
is B15,,,,1, and the command for setting the parameter Consecutive driving time is
B15,300.
If you want to read the parameters, send B15.
Applicable Model T1/T333/T366/T366G/T388G
Example
SMS Sending 0000,B15,120,,20,1
SMS Reply 353358017784062,B15,OK

Copyright © 2018 Meitrack Group All rights reserved. - 26 -

MEITRACK SMS Protocol

3.35 Setting the Anti-Theft Function – B21

SMS Sending 0000,B21,Status

SMS Reply IMEI,B21,OK
Description Status = 1: function enabled (default). When the device detects that the vehicle door is
open or the ACC is on, an alert will be generated. For details about vehicle door detection
ports and ACC detection ports, see the following table.
Status = 0: function disabled.
The vehicle door detection ports and ACC detection ports of vehicle trackers are as
follows:
Tracker Model Negative Input (Vehicle Door) Positive Input (ACC)
MVT800 Input 3 Input 4
T322X Input 3 Input 2

Note: When the T322X/MVT800 is in arming state, if input 3 (ACC) is triggered, a vehicle
theft alert will be generated, the buzzer will make a sound, and the tracker will make a
call and will send an SMS to the authorized phone number. If T322X's input 2 or MVT800's
input 4 is triggered, output 1 will be activated (cut off fuel) and the tracker will make a
call and will send an SMS to the authorized phone number.
Applicable Model MVT100/MVT340/MVT380/MVT600/MVT800/T322X/T1/T3/T333/TC68S/T355/T355G/
T311/T622G/T366/T366G/T388G/T688
Example
SMS Sending 0000,B21,1
SMS Reply 353358017784062,B21,OK

3.36 Setting the Mileage and Speed Calculation Mode – B22

SMS Sending 0000,B22,Calculation mode X/Rotational speed ratio K

SMS Reply IMEI,B22,OK
Description X = 0 (default): Use GPS speed.
X = 1: Use the RPM speedometer and use GPS speed to automatically calibrate the
rotational speed ratio K (recommended).
X = 2: Use the RPM speedometer and press the SOS button to calibrate the rotational
speed ratio K.
Rotational speed ratio K calibrated by GPS speed are not accurate. You can send the
command B22,2 to calibrate it again. You have to stop the vehicle after the mileage of
the vehicle speedometer changes. The buzzer will make a long buzzing sound after the
device receives the calibration command, indicating that the device enters the calibration
state. At the same time, the green LED indicator will steady on. In this way, you have to
drive the vehicle (no speed limit) and stop it when the driving distance reaches 1 km.
Then press and hold down the SOS button for 2 seconds. The speaker will make two
sounds, indicating that the rotational speed ratio K is calibrated successfully. If the
calibration cannot be completed within 10 minutes, the device will exit the calibration

Copyright © 2018 Meitrack Group All rights reserved. - 27 -

MEITRACK SMS Protocol

state and you have to do the operations again. Besides, the green LED indicator will be
off and the rotational speed ratio K will be sent.
X = K ≥ 3: Use the RPM speedometer and the rotational speed ratio is K.
Rotational speed ratio K: K pulses/km
X: decimal
3 ≤ K ≤ 65535
Applicable Model T688
Example
SMS Sending 0000,B22,60
SMS Reply 353358017784062,B22,OK

3.37 Setting Filtering Time of an Input Port – B26

SMS Sending 0000,B26,1:T1,2:T2,3:T3

SMS Reply IMEI,B26,OK
Description n:Tn
n = 1: input 1. T1 indicates the buffer time. The value of T1 ranges from 0 to 65535. Unit:
10ms. The default value of T1 is 0.
The command is used to detect triggering time of the ACC, vehicle doors, or other
switches, so as to avoid misinformation.
You can set one or multiple input ports at a time.
If you want to read filtering time of an input port, send B26.
Applicable Model T1/T333/T366/T366G
Example
SMS Sending 0000,B26,1:1
SMS Reply 353358017784062,B26,OK

3.38 Setting Auto Arming – B27

SMS Sending 0000,B27,X

SMS Reply IMEI,B27,OK
Description X: Whether to enable auto arming. When the parameter value is 1, auto arming will be
enabled. When the parameter value is 0, auto arming will be disabled.
When the device is in sleep mode and the auto arming function has been enabled, the
device will enter auto arming state.
You can set disarming by B21 command or remote control.
Applicable Model T366/T366G
Example
SMS Sending 0000,B27,10
SMS Reply 353358017784062,B27,OK

Copyright © 2018 Meitrack Group All rights reserved. - 28 -

MEITRACK SMS Protocol

3.39 Turning off the LED Indicator – B31

SMS Sending 0000,B31,A

SMS Reply IMEI,B31,OK
Description When the value of A is 00, the tracker's indicator is turned on (default). You can query the
device's running status according to the indicator status.
When the value of A is 10, the tracker's indicator is turned off.
Applicable Model Excluding T322X/T355
Example
SMS Sending 0000,B31,10
SMS Reply 353358017784062,B31,OK

3.40 Setting a Log Interval – B34

SMS Sending 0000,B34,Log interval

SMS Reply IMEI,B34,OK
Description Set the interval for recording data to device's memory when the GPS signal is valid. When
there is no GPS signal, data will not be recorded.
Log interval = 0: function disabled (default).
Log interval = [1…65535]: function enabled. Unit: second.
Recorded logs can only be read by Meitrack Manager software.
Applicable Model Excluding T322X/MVT340
Example
SMS Sending 0000,B34,60
SMS Reply 353358017784062,B34,OK

3.41 Setting the SMS Time Zone – B35

SMS Sending 0000,B35,SMS minute

SMS Reply B35,OK
Description The default time zone of the tracker is GMT 0. You can run the B35 command to change
the time zone of an SMS report to the local time zone. The time zone of an SMS report is
different from that of a GPRS data packet.
When SMS minute is 0, the time zone is GMT 0.
When SMS minute is a value ranging from -720 to 780, set time zones.
Applicable Model All models
Example
SMS Sending 0000,B35,480
SMS Reply 353358017784062,B35,OK

3.42 Setting the GPRS Time Zone – B36

SMS Sending 0000,B36,GPRS minute

Copyright © 2018 Meitrack Group All rights reserved. - 29 -

MEITRACK SMS Protocol

SMS Reply IMEI,B36,OK

Description When GPRS minute is 0, the time zone is GMT 0 (default). The MS03 can automatically
detect users' time zone, so that the GPRS time zone does not need to be changed.
Otherwise, inaccurate data occurs.
When GPRS minute is a value ranging from -720 to 780, set time zones. If the tracking
platform that you use is not Meitrack platform and cannot detect the time zone, you can
set the GPRS time zone as required.
Applicable Model Excluding T355/T355G
Example
SMS Sending 0000,B36,480
SMS Reply 353358017784062,B36,OK

3.43 Setting the Auto Sleep Function – B37

SMS Sending 0000,B37,X

SMS Reply IMEI,B37,OK
Description Whether the tracker enters deep sleep mode automatically when it detects that the
voltage of the external power supply is smaller than the preset value (see command B38).
X: The parameter value is 0 or 1. 0: The auto sleep function will be disabled. 1: The auto
sleep function will be enabled. The default value is 1.
Applicable Model T1/T333/T366/T366G
Example
SMS Sending 0000,B37,1
SMS Reply 353358017784062,B37,OK

3.44 Setting the Auto Sleep Voltage – B38

SMS Sending 0000,B37,X

SMS Reply IMEI,B37,OK
Description X: The parameter value ranges from 0 to 2400. When the parameter value is 0, use the
formula (voltage = X/10 V) to calculate the voltage.
If you want to read the parameters, send B38.
Applicable Model T1/T333/T366/T366G
Example
SMS Sending 0000,B38,1180
SMS Reply 353358017784062,B38,OK

3.45 Setting the Roaming Table Switching Function – B43

SMS Sending 0000,B43,X

SMS Reply IMEI,B43,OK
Description X: The parameter value is 0 or 1. 0: The roaming table switching function will be disabled.

Copyright © 2018 Meitrack Group All rights reserved. - 30 -

MEITRACK SMS Protocol

1: The roaming table switching function will be enabled.

The default value is 0.
If you want to read the parameters, send B43.
Applicable Model T366/T366G
Example
SMS Sending 0000,B43,1
SMS Reply 353358017784062,B43,OK

3.46 Determining Vehicle Status by ACC Status – B60

SMS Sending 0000,B60,X

SMS Reply IMEI,B60,OK
Description X = 1: Determine whether the vehicle is moving or stops moving by ACC status. When the
device detects that the ACC is on, it means that the vehicle is moving. When the device
detects that the ACC is off, it means that the vehicle stops moving.
X = 0 (default): Determine whether the vehicle is moving or stops moving by ACC status,
3-axis accelerometer, revolutions per minute (RPM) and vehicle's driving speed.
When the device detects that the ACC is off, device's longitude and latitude will not be
updated, so as to avoid static drift.
Note: The first positive input of vehicle trackers is connected to engine detection by
default. The ACC detection ports of vehicle trackers are as follows:
Tracker Model Positive Input (ACC)
MVT100 Input 2
MVT340 Input 2
MVT380 Input 4
MVT600 Input 3
T1/T333/T3 Input 3
MVT800 Input 4
T322X Input 2
T366/T366G Input 2
T622G Input 2
T388G Input 3
T688 Input 3
Applicable Model Excluding T322X/MT90/MT90G/P99G/TC68S/T355/T355G/P66
Example
SMS Sending 0000,B60,1
SMS Reply 353358017784062,B60,OK

3.47 Setting the Fuel Filtering Function – B72

SMS Sending 0000,B72,X

SMS Reply IMEI,B72,OK

Copyright © 2018 Meitrack Group All rights reserved. - 31 -

MEITRACK SMS Protocol

Description Whether to filter the fuel percentage value. If the function is enabled, the too high or too
low values generated during a time period will be filtered and an average value will be
obtained. If the function is disabled, the last data will be obtained.
X: The parameter value is 0 or 1. 0: function disabled. 1: function enabled.
The default value is 0.
Applicable Model T1/T333
Example
SMS Sending 0000,B72,1
SMS Reply 353358017784062,B72,OK

3.48 Setting SMS Event Characters – B91

SMS Sending 0000,B91,SMS event code,SMS header

SMS Reply IMEI,B91,OK
Description SMS header: a maximum of 16 bytes
For details, see section 1.2 "Event Code and SMS Header."
Applicable Model Excluding T322X/TC68S
Example
SMS Sending 0000,B91,1,SOS
SMS Reply 353358017784062,B91,OK

3.49 Setting Event Authorization – B99

SMS Sending 0000,B99,<SMS>/<0>,<Phone number location>/<Authorized phone number>,<Operation

code>,[Event code 1]…[Event code n]
0000,B99,<CALL>/<1>,<Phone number location>/<Authorized phone number>,<Operation
code>,[Event code 1]…[Event code n]
0000,B99,<GPRS>/<2>,<Operation code>,[Event code 1]…[Event code n]
0000,B99,<CAMERA>/<3>,<Operation code>,[Event code 1]…[Event code n]
0000,B99,<BUZZER>/<4>,<Operation code>,[Event code 1]…[Event code n].
SMS Reply IMEI,B99,<SMS>/<0>,<Phone number location>,<Authorized phone number>,[Event code
1]…[Event code n]
IMEI,B99,<CALL>/<1>,<Phone number location>,<Authorized phone number>,[Event code
1]…[Event code n]
IMEI,B99,<GPRS>/<2>,[Event code 1]…[Event code n]
IMEI,B99,<CAMERA>/<3>,[Event code 1]…[Event code n]
IMEI,B99,<BUZZER>/<4>,[Event code 1]…[Event code n]
Description Fields SMS, CALL, CAMERA, GPRS, and BUZZER can be presented by 0–4 in decimal string.
Operation codes GET, SET, ADD, and DEL can be presented by 0–3 in decimal string. These
characters are not case-sensitive.
Note: Ensure that an authorized phone number is set by using the A71 command or the
parameter configuration tool before the B99 command is used to set the SMS/CALL event
code. The tracker will compare the authorized phone number issued by B99 with the

Copyright © 2018 Meitrack Group All rights reserved. - 32 -

MEITRACK SMS Protocol

authorized phone number (excluding +86 characters) of the tracker. If the phone numbers are
the same, the new event code will be stored. If the phone numbers are inconsistent, an error
SMS will be sent.
Applicable Model All models
Example
SMS Sending 0000,B99,gprs,get
SMS Reply 353358017784062, B99,1,17,18

3.50 Controlling Output Status – C01

SMS Sending 0000,C01,Speed,ABCDE

SMS Reply IMEI,C01,OK
Description When the speed is 0, no speed limit exists. That is, when the tracker receives a command,
the function will take effect immediately.
When the speed is a value ranging from 1 to 255 (unit: km/h), set the speed limit. When
the driving speed is lower than the speed limit, the function will take effect.
A = 0, close output (output 1) - open drain
A = 1, open output (output 1) - connect to GND
A = 2, remain previous status.
B = 0, close output (output 2) - open drain
B = 1, open output (output 2) - connect to GND
B = 2, remain previous status.
C = 0, close output (output 3) - open drain
C = 1, open output (output 3) - connect to GND
C = 2, remain previous status.
D = 0, close output (output 4) - open drain
D = 1, open output (output 4) - connect to GND
D = 2, remain previous status.
E = 0, close output (output 5) - open drain
E = 1, open output (output 5) - connect to GND
E = 2, remain previous status.
Applicable Model Excluding TC68S/P99G/MT90/MT90G/T355/T355G/P66/T322X
Example
SMS Sending 0000,C01,20,12221
SMS Reply 353358017784062,C01,OK

3.51 Setting a GPRS Event Transmission Mode – C03

SMS Sending 0000,C03,X

SMS Reply IMEI,C03,OK
Description X = 0: automatic event report (default)
X = 1: Before another event can be transmitted, existing event reports need to be
confirmed and deleted on the server by the AFF command. Select this mode when GPRS

Copyright © 2018 Meitrack Group All rights reserved. - 33 -

MEITRACK SMS Protocol

uses UDP.
Applicable Model Excluding T322X/T355/T355G/P66
Example
SMS Sending 0000,C03,0
SMS Reply 353358017784062,C03,OK

3.52 Setting I/O Port Status – C08

SMS Sending 0000,C08,IO0:Mn,IO1:Mn,IO2:Mn,IO3:Mn,IO4:Mn

SMS Reply IMEI,C08,IO0:Mn,IO1:Mn,IO2:Mn,IO3:Mn,IO4:Mn
Description 1. IO0, IO1, IO2, IO3, and IO4 indicate I/O ports.
IO0: open collector by default (yellow cable)
IO1: 1-Wire interface by default (green cable)
IO2: negative input by default (grey cable)
IO3: positive input by default (white cable)
IO4: AD input by default (blue cable)
2. Mn indicates the I/O port status. The parameter value is as follows:
0: low trigger
1: high trigger
2: AD input
3: Remote control input
4: open collector
5: low output
6: PWM output
7: Buzzer alert output
8: 1-Wire
3. You can set one or multiple input ports simultaneously. If you want to read I/O port
parameters, send 0000,C08.
Note:
1. IO0: Mn parameter value is 4, 5, or 6.
2. IO1: Mn parameter value is 0, 4, 5, 7, or 8.
3. IO2: Mn parameter value is 0, 1, or 2.
4. IO3: Mn parameter value is 0, 1, or 2.
5. IO4: Mn parameter value is 0, 1, 2, or 3.
Applicable Model T366/T366G
Example
SMS Sending 0000,C08,IO0:5
SMS Reply 353358017784062,C08,IO0:5,IO1:0,IO2:2,IO3:2,IO4:1

3.53 SMS Display (LCD Display) – C11

SMS Sending 0000,C11,Text

SMS Reply IMEI,C11,OK

Copyright © 2018 Meitrack Group All rights reserved. - 34 -

MEITRACK SMS Protocol

Description The command is used to show an SMS sent by a mobile phone on the LCD display.
Text: indicates the SMS text. ASCII character string; a maximum of 140 bytes.
The MVT600 does not support Unicode.
Applicable Model MVT600/T1/T333/T3
Example
SMS Sending 0000,C11,SMS Message
SMS Reply 353358017784062,C11,OK

3.54 Setting the Fuel Theft Alert – C49

SMS Sending 0000,C49,Fuel theft alert detection time,Fuel decrease percentage

SMS Reply IMEI,C49,OK
Description Fuel theft alert detection time = 0: function disabled.
Fuel theft alert detection time = [1…255]: function enabled. Unit: minute; default value:
3.
Fuel decrease percentage = 0: function disabled.
Fuel decrease percentage = [1…100]: function enabled. Default value: 2.
By default, when the fuel decrease percentage is 2% within 3 minutes, a fuel theft alert
will be generated (for example, C49,3,2).
Note: The fuel decrease percentage must be over two times larger than the percentage
of fuel sensor accuracy. For example, if the fuel sensor accuracy is 10 mm and its height
is 500 mm, the recommended fuel decrease percentage is 4% (10/500 x 2).
Applicable Model MVT600/T1/MVT800/T333/T3/T366/T366G/T622G/T388G/T688
Example
SMS Sending 0000,C49,3,2
SMS Reply 353358017784062,C49,OK

3.55 Setting the Volume of Device's Microphone and Speaker – C69

SMS Sending 0000,C69,Microphone volume,Speaker volume

SMS Reply IMEI,C69,OK
Description Microphone volume: decimal; value range: 0–100. When the parameter value is 0, the
microphone will be muted.
Speaker volume: decimal; value range: 0–100. When the parameter value is 0, the speaker
will be muted.
Applicable Model T1/T333/P99G
Example
SMS Sending 0000,C69,5,5
SMS Reply 353358017784062,C69,OK

Copyright © 2018 Meitrack Group All rights reserved. - 35 -

MEITRACK SMS Protocol

3.56 Setting a Serial Port and a Peripheral – C70

SMS Sending 0000,C70,X,Y

SMS Reply IMEI,C70,OK
Description X: Select a serial port. The default value is 2.
Y: Select a peripheral; decimal.
Y = 0: camera
Y = 2: LED display
Y = 4: RFID
Applicable Model T1/T333/T366/T366G
Example
SMS Sending 0000,C70,2,0
SMS Reply 353358017784062,C70,OK

3.57 Powering Off the Device by Command – C76

SMS Sending 0000,C76

SMS Reply IMEI,C76,OK
Description The device will be turned off automatically after receiving the command.
Note: When the GSM signal is not good, you may not receive the reply of the command.
Applicable Model P99G
Example
SMS Sending 0000,C76
SMS Reply 353358017784062,C76,OK

3.58 Disabling the Power-off Function of the Power Button – C77

SMS Sending 0000,C77,X

SMS Reply IMEI,C77,OK
Description X: Whether to disable the power-off function of the power button.
 X = 1: You can turn off the device by power button.
 X = 0: You cannot turn off the device by power button.
Applicable Model P99G/T1/T333/T366/T366G
Example
SMS Sending 0000,C77,1
SMS Reply 353358017784062,C69,OK

3.59 Setting the GSM Jamming Detection Function – C85

SMS Sending 0000,C85,X,Y

SMS Reply IMEI,C85,OK
Description X: The parameter value is 0 or 1. 0: function disabled. 1: function enabled. The default

Copyright © 2018 Meitrack Group All rights reserved. - 36 -

MEITRACK SMS Protocol

value is 0.
Y: The parameter value ranges from 0 to 9999. When input 1 is triggered in ACC ON state
and GSM jamming lasts Y minutes, an alert will be generated and output 1 will be
activated. When the parameter value is 0, an alert will be generated and output 1 will be
activated immediately.
If you want to read the parameters, send C85.
Note:
GSM jamming for Y mins ACC ON ACC OFF
GPS valid & speed ≤ 20 Output 1 (fuel/power cut- Output 1 (fuel/power cut-
km/h off) will be triggered off) will be triggered
immediately, and a GSM immediately, and a GSM
jamming event will be jamming event will be
generated. generated.
GPS invalid Output 1 will be triggered The tracker detects that
for 1 second and then will the ACC is off for more
recover to the inactive than 10 consecutive
state. The action will be seconds. Then output 1
cycled every 5 seconds will be triggered all the
until the tracker detects time and a GSM jamming
that the ACC is off for more event will be generated.
than 10 consecutive
seconds. Then output 1
will be triggered all the
time and a GSM jamming
event will be generated.

If a driver cannot drive due to GSM jamming, he or she can activate output 1 by triggering
input 1 for 5 times within 1 minute.
Applicable Model T1/T333/T366/T366G
Example
SMS Sending 0000,C85,1,5
SMS Reply 353358017784062,C85,OK

3.60 Authorizing an RFID Card/iButton Key – D10

SMS Sending 0000,D10,RFID(1),RFID(2),…,RFID(n)

SMS Reply IMEI,D10,OK
Description RFID(n): indicates the authorized RFID card number. The value ranges from 1 to
4294967295. Decimal.
A maximum of 50 RFID cards can be authorized at a time.
Applicable Model MVT600/T1/T333/T3/T366/T366G/T622G/T388G/T688
Example
SMS Sending 0000,D10,00000001

Copyright © 2018 Meitrack Group All rights reserved. - 37 -

MEITRACK SMS Protocol

SMS Reply 353358017784062,D10,OK

3.61 Authorizing RFID Cards/iButton Keys in Batches – D11

SMS Sending 0000,D11,RFID card start number,n

SMS Reply IMEI,D11,OK
Description RFID card start number: The value ranges from 1 to 4294967295. Decimal.
n: indicates the number of RFID cards to be authorized in batches. Decimal. The parameter
value ranges from 1 to 128.
Applicable Model MVT600/T1/T333/T3/T366/T366G/T622G/T388G/T688
Example
SMS Sending 0000,D11,00000001,128
SMS Reply 353358017784062,D11,OK

3.62 Checking iButton/RFID Authorization – D12

SMS Sending 0000,D12,iButton ID

SMS Reply IMEI,D12,n
Description iButton ID: The parameter value ranges from 1 to 4294967295. Decimal.
n: When n is not 0, the iButton key is authorized. When n is 0, the iButton key is not
authorized.
Applicable Model MVT600/T1/T333/T3/T366/T366G/T622G/T388G/T688
Example
SMS Sending 0000,D12,13737431
SMS Reply 353358017784062,D12,0

3.63 Deleting an Authorized RFID Card/iButton Key – D14

SMS Sending D14,RFID(1),RFID(2),…,RFID(n)

SMS Reply D14,OK
Description RFID(n): indicates the RFID ID to be deleted. The value ranges from 1 to 4294967295.
Decimal.
A maximum of 50 RFID cards can be deleted at a time. One SMS (including the protocol)
cannot exceed 140 bytes.
Applicable Model MVT600/T1/T333/T3/T366/T366G/T622G/T388G/T688
Example
SMS Sending 0000,D14,00000001
SMS Reply 353358017784062,D14,OK

3.64 Deleting Authorized RFID Cards/iButton Keys in Batches – D15

SMS Sending 0000,D15,RFID card start number,n

SMS Reply IMEI,D15,OK

Copyright © 2018 Meitrack Group All rights reserved. - 38 -

MEITRACK SMS Protocol

Description RFID card start number: The parameter value ranges from 1 to 4294967295. Decimal.
n: indicates the number of RFID cards to be deleted in batches. Decimal. The parameter
value ranges from 1 to 128.
When the card start number is a value ranging from 1 to 4294967295 and n is greater than
or equal to 65536, all authorized numbers will be deleted.
Applicable Model MVT600/T1/T333/T3/T366/T366G/T622G/T388G/T688
Example
SMS Sending 0000,D15,00000001,128
SMS Reply 353358017784062,D15,OK

3.65 Setting Idling Time – D34

SMS Sending 0000,D34,Time

SMS Reply IMEI,D34,OK
Description Time: When the device detects that the driving speed is 0 and the ACC is on (input 2
activated) for consecutive several minutes, an idling alert will be generated. Value range:
0–65536; unit: minute. The default value is 1.
Applicable Model T366/T366G/T622G
Example
SMS Sending 0000,D34,1
SMS Reply 353358017784062,D34,OK

3.66 Setting GPS Data Filtering – D71

SMS Sending 0000,D71,X,Y1,Y2,Y3,Y4

SMS Reply IMEI,D34,OK
Description X: Whether to enable the GPS data filtering function. 1: Enable the function. 0: Disable the
function (default).
Y1: indicates the minimum value of the driving speed. Value range: 0–999 km/h. When
the driving speed is greater than Y1, GPS data will be updated.
Y2: indicates the maximum value of the driving speed. Value range: 0–999 km/h. When
the driving speed is smaller than Y2, GPS data will be updated.
Y3: indicates the number of satellites. Value range: 0–99. When the number of satellites
is greater than Y3, GPS data will be updated.
Y4: indicates the positioning accuracy. Unit: x10. Value range: 0–999. When the
positioning accuracy value is smaller than Y4, GPS data will be updated.
When the GPS data filtering function is enabled, if all conditions of Y1, Y2, Y3 and Y4 are
met, GPS data will be updated.
The GPS data filtering function can eliminate static drift, but it will affect the route
precision.
Applicable Model T622G/T366/T366G
Example
SMS Sending 0000,D71,1,5,225,8,9

Copyright © 2018 Meitrack Group All rights reserved. - 39 -

MEITRACK SMS Protocol

SMS Reply 353358017784062,D71,OK

3.67 Setting Output Triggering – D72

SMS Sending 0000,D72,X,Y1,Y2,Y3,Y4

SMS Reply IMEI,D72,OK
Description X: Select an output port. 1: output 1. 2: output 2.
Y1: indicates the output time when an event is triggered. Unit: 10 ms. Value range: 0–
4294967295.
Y2: The parameter value is 0, 1, and 2.
 0: Output high level
 1: Output low level
 2: Output PWM wave
Y3: indicates the PWM duty cycle. Value range: 0–100.
Y4: indicates the PWM period. Unit: μs. Value range: 2000–50000000.
Configure output triggering according to your requirements. The output is low level by
default. The PWM duty cycle and period are available for PWM wave output only.
Applicable Model T622G
Example
SMS Sending 0000,D72,1
SMS Reply 353358017784062,D72,OK

3.68 Allocating GPRS Cache and GPS Log Storage Space – D73

SMS Sending 0000,D73,X,Y

SMS Reply IMEI,D73,OK
Description X: Set the storage percentage of GPRS cache. The parameter value is a decimal character.
Y: Set the storage percentage of GPS logs. The parameter value is a decimal character.
The sum of X and Y must be 100.
If data is stored in internal memory which has 8 MB capacity, GPRS cache and GPS logs
occupy 50% of the total capacity respectively by default (that is, 8,190 GPRS cache records
and 65,536 GPS logs).
The maximum number of GPRS cache records is 16,384 and the maximum number of GPS
logs is 131,072.
Applicable Model T366/T366G/T622G/P99G
Example
SMS Sending 0000,D73,1
SMS Reply 353358017784062,D73,OK

3.69 Setting the Harsh Acceleration/Braking Alert – D78

SMS Sending 0000,D78,X1,X2,Y1,Y2

SMS Reply IMEI,D78,OK
Description X1: indicates the harsh acceleration alert value. Decimal; unit: mG; value range:
[90...1000]; default value: 100.

Copyright © 2018 Meitrack Group All rights reserved. - 40 -

MEITRACK SMS Protocol

X2: indicates the consecutive time of a harsh acceleration alert. Unit: 10 ms; value range:
[30...300]; default value: 40.
Y1: indicates the harsh braking alert value. Decimal; unit: mG; value range: [-1500...-100];
default value: -200.
Y2: indicates the consecutive time of a harsh braking alert. Unit: 10 ms; value range:
[30...300]; default value: 65.
If you want to query the parameters, send D78.
Applicable Model T622G/T366/T366G
Example
SMS Sending 0000,D78,1
SMS Reply 353358017784062,D78,OK

3.70 Setting Harsh Acceleration and Harsh Braking Parameters – D79

SMS Sending 0000,D79,X,Y

SMS Reply IMEI,D79,OK
Description X: indicates the harsh acceleration alert value. Decimal; unit: mG; value range:
[90…1000]; default value: 150.
Y: indicates the harsh braking alert value. Decimal; unit: mG; value range: [-1500…-100];
default value: -180.
Harsh acceleration level:
 Level 1: 150
 Level 2: 170
 Level 3: 200
 Level 4: 230
 Level 5: 250
 Level 6: 280
 Level 7: 300
 Level 8: 320
 Level 9: 350
 Level 10: 400
Harsh braking level:
 Level 1: -180
 Level 2: -200
 Level 3: -250
 Level 4: -300
 Level 5: -350
 Level 6: -400
 Level 7: -450
 Level 8: -500
 Level 9: -550
 Level 10: -600
The higher the level is, the lower the alert probability is.

Copyright © 2018 Meitrack Group All rights reserved. - 41 -

MEITRACK SMS Protocol

Note: When you install the tracker, the direction and angle of the tracker and vehicle
should be consistent. And ensure that the tracker is installed firmly.
Applicable Model T1/T333/T366/T366G
Example
SMS Sending 0000,D79,150,-180
SMS Reply 353358017784062,D79,OK

3.71 Setting Harsh Cornering Parameters – D80

SMS Sending 0000,D80,X1,X2,X3,X4,Y1,Y2,Y3,Y4

SMS Reply IMEI,D80,OK
Description X: indicates the Sharp Left Turn parameter.
Y: indicates the Sharp Right Turn parameter.
X1 or Y1: indicates the acceleration value while accelerating. Unit: mG; value range:
[10…3000].
X2 or Y2: indicates the time while accelerating. Unit: ms; value range: [10…1000].
X3 or Y3: indicates the acceleration value while braking. Unit: mG; value range: [-3000…-
10].
X4 or Y4: indicates the time while braking. Unit: ms; value range: [10…1000].
To set Sharp Left Turn and Sharp Right Turn alerts, you only need to set the parameter
values of X3 and Y3, and other parameter values remain unchanged (X1 & Y1: 150; X2 &
Y2: 80; X4 & Y4: 80). The levels of X3 and Y3 parameters are as follows:
 Level 1: -110
 Level 2: -150
 Level 3: -200
 Level 4: -250
 Level 5: -280
 Level 6: -310
 Level 7: -350
 Level 8: -390
 Level 9: -450
 Level 10: -500
The higher the level is, the lower the alert probability is.
Note: When you install the tracker, the direction and angle of the tracker and vehicle
should be consistent. And ensure that the tracker is installed firmly.
Applicable Model T1/T333/T366/T366G
Example
SMS Sending 0000,D80,150,80,-110,80,150,80,-110,80
SMS Reply 353358017784062,D80,OK

3.72 Reading Device's Firmware Version and SN – E91

SMS Sending 0000,E91

Copyright © 2018 Meitrack Group All rights reserved. - 42 -

MEITRACK SMS Protocol

SMS Reply IMEI,E91,Version,SN

Description Read the tracker's firmware version and SN.
Applicable Model All models
Example
SMS Sending 0000,E91
SMS Reply 353358017784062,E91,FWV1.00,12345678

3.73 Restarting the GSM Module – F01

SMS Sending 0000,F01

SMS Reply IMEI,F01,OK
Description Restart the GSM module.
Applicable Model Excluding T322X/P66
Example
SMS Sending 0000,F01
SMS Reply 353358017784062,F01,OK

3.74 Restarting the GPS Module – F02

SMS Sending 0000,F02

SMS Reply IMEI,F02,OK
Description Restart the GPS module.
Applicable Model Excluding T322X/P66
Example
SMS Sending 0000,F02
SMS Reply 353358017784062,F02,OK

3.75 Setting the Mileage and Run Time – F08

SMS Sending 0000,F08,Run time,Mileage

SMS Reply IMEI,F08,OK
Description Run time:
 Value range: [0…4294967295]
 Decimal
 Unit: second
If you do not want to set the parameter, leave it blank.
Mileage:
 Value range: [0…4294967295]
 Decimal
 Unit: meter
If you do not want to set the parameter, leave it blank.
Applicable Model All models

Copyright © 2018 Meitrack Group All rights reserved. - 43 -

MEITRACK SMS Protocol

Example
SMS Sending 0000,F08,0,4825000
SMS Reply 353358017784062,F08,OK
Note: In the above command, the run time is 0 and the mileage is 4825 km.

3.76 Deleting SMS/GPRS Cache Data – F09

SMS Sending 0000,F09,Number

SMS Reply IMEI,F09,OK
Description If the number is 1, SMS cache data to be sent is deleted.
If the number is 2, GPRS cache data to be sent is deleted.
If the number is 3, SMS and GPRS cache data to be sent is deleted.
Applicable Model All models
Example
SMS Sending 0000,F09,1
SMS Reply 353358017784062,F09,OK

3.77 Backing up Device Parameters – F10

SMS Sending 0000,F10,X,Default user-defined parameters

Description X = 0: Obtain default user-defined device parameter names.
X = 1: Restore system parameters to default user-defined parameters.
X = 2: Set current system parameters of the device to default user-defined parameters. If
the command contains the default user-defined parameter name, save it for later query.
Otherwise, use the system time as the file name.
X = 3: Delete default user-defined device parameters and corresponding parameter names
(non-numeric ASCII characters like 00 or FF).
Default user-defined parameters: At most 32 ASCII characters. If the value is less than 32
characters, add non-numeric ASCII characters like 00 or FF.
Applicable Model P99G
Example
SMS Sending 0000,F10,0
SMS Reply 353358017784062,F10,123

3.78 Restoring Initial Settings – F11

SMS Sending 0000,F11

SMS Reply IMEI,F11,OK
Description Restore initial settings except the SMS password.
Applicable Model All models
Example
SMS Sending 0000,F11

Copyright © 2018 Meitrack Group All rights reserved. - 44 -

MEITRACK SMS Protocol

SMS Reply 353358017784062,F11,OK

3.79 Changing the Tracker Password – F20

SMS Sending 0000,F20,New password

SMS Reply IMEI,F20,OK
Description Change the SMS password.
Note: The password has four decimal digits only.
Applicable Model All models
Example
SMS Sending 0000,F20,1234
SMS Reply 353358017784062,F20,OK

3.80 Initializing the Tracker Password – FAB

SMS Sending 8888,FAB

SMS Reply IMEI,FAB,OK
Description The command is used to restore the tracker's password to factory settings.
The command takes effect only when you send it by using the authorized phone number.
Applicable Model All models
Example
SMS Sending 8888,FAB
SMS Reply 353358017784062,FAB,OK

If you have any questions, do not hesitate to email us at [email protected].

Copyright © 2018 Meitrack Group All rights reserved. - 45 -