Magneto Interface Card
for Loop-AM3440
Features
y 12 telephone connections for Magneto
y Supports MRD (manual ring down)
y Supports Magneto to FXS speak PLAR function
y Supports dual type L1/L2 and L1/GND magneto phone or MRD
y Per port software programmable for ringing and ring detection on
L1/L2 or L1/GND
y 16 Vrms minimum detectable ring
y Intended for use with 110-220 Vac (SAB) or ±48 Vdc (SD, SDA,
SDB, SD125) powered main units
Description
The twelve channel magneto (12MAGA) plug-in card is designed for the single slot on Loop-AM3440 series.
This module allows communications between magneto telephones. With the card set in PLAR mode,
communications can take place between a magneto telephone and a regular telephone. All signaling is carried
transparently by the digitizing process.
.
Ordering Information
To specify options, choose from the list below.
Note: RoHS compliant units are identified by the letter G appearing at the end of the ordering code.
Model Description Notes
(RoHS compliant)
Loop-AM3440-12MAGA-G 12-channel Magneto plug-in module with ring across Please use with
L1&GND and L1&L2. Software programmable. 100-240Vac or ±48Vdc
powered main units.
Accessories
User’s Manual
Loop-AM3440-12MAGA-UM User’s Manual (paper copy).
Note: A CD version of the manual is already included as standard package.
Cable Management Bar
Loop-ACC-CM-12RJ11- G Cable Management Bar For AM3440 12 Magneto
H192 x W7 x D12 mm plug-in card only.
Shipped with 3 screws.
1
Magneto Interface Card for Loop-AM3440 Plug-in Modules
Magneto Interface Card Product Specifications
Magneto (old crank-handle hot-line telephones), MRD (Manual Ring Down) Voice Card
Connector RJ11 x 12
Power 110-220 Vac or ±48 Vdc
Alarm Conditioning CGA busy after 2.5 seconds of LOS, LOF
Encoding A-law or μ-law, user selectable per card configurable
Impedance Balanced 600 or 900 ohms (for magneto telephone impedance )
Longitudinal Conversion Loss > 46dB
Gain Adjustment -21 to +7 dB / 0.1dB step transmit gain (D-A)
-21 to +13 dB/0.1dB step receive gain (A-D)
Signal/ Distortion > 25dB with 1004 Hz, 0dBm input
Frequency Response - 0.25 to -1 dB from 300 to 3400 Hz, coincide with ITU-T G.712
Idle Channel Noise Max. –65 dBm0p
Signaling
Minimum Detectable Ringing Voltage 16 Vrms
Crank Detectable Across L1 & L2 Mode (Tip and Ring), L1 & GND Mode(Tip and GND) per port
software programmable
Crank Detected time Valid carnk: more than 250 ms
Invalid crank: less than 160 ms
Ringing Generation Voltage: 76 Vrms (sine wave)
Frequency: 25Hz
Ring duration Software configurable options:
1. PLAR OFF (Continuous Mode)
Ring duration depends on cranking time
2. PLAR OFF (One-time) Mode
Crank the phone for one time, and the ring duration of the
far-end phone could be 0.7, 1.0, 1.5 or 2.0 sec
3. PLAR ON
When FXS phone off-hooked, the ring duration of the far-end
magneto phone could be 0.7, 1.0, 1.5 or 2.0 sec
Ringing Send Across L1 & L2 Mode (Tip and Ring), L1 & GND Mode(Tip and GND)
Signaling Turn Magneto Phone crank (Ringing across Tip and Ring or Tip and
Ground)
Signaling Bit A,B,C,D Programable
y Signaling is carried transparently by the digitizing process.
y Use Magneto card default setting for communications between magneto telephones
y Use Magneto card PLAR mode setting for communications between a magneto telephone and a regular
telephone
2
Magneto Interface Card for Loop-AM3440 Plug-in Modules
Application Illustrations
Standard Magneto Phone to Magneto Phone
AM3440 AM3440
FXS E1/T1 E1/T1 E1/T1 MAGA
Card Card Card Card
Standard PLAR ON PLAR ON
Phone Mode Mode
Telephone to Hand-Cranked Magneto Phone (PLAR ON)
AM3440 MAGNETO
PHONE
FXS MAGA
Card PBX
Card
Standard PLAR ON PLAR ON
Phone Mode Mode
As Telephone Converter (PLAR ON)
3
Magneto Interface Card for Loop-AM3440 Plug-in Modules
LOOP TELECOMMUNICATION INTERNATIONAL, INC.
www.looptelecom.com ISO 9001 / ISO 14001
Australia & New
Worldwide Europe Americas
Zealand
6F, No. 8, Hsin Ann Road Rue de Culot, 13 8 Carrick Road 3 Imperial Ave, Mount
Hsinchu Science Park BE-1402 Nivelles Palm Beach Gardens Waverley, Victoria 3149,
Hsinchu, Taiwan 30078 Belgique Florida 33418, U.S.A. Australia
+886-3-578-7696 +32-496-54-27-44 +1-561-627-7947 +61-413-382-931
[email protected] [email protected] [email protected] [email protected]© 2018 Loop Telecommunication International, Inc. All Rights Reserved
Version 1 11 January 2018 Subject to change without notice
