Scribd
Upload
67 views

After Creation of Scatter Don't Close The Main Window of The Program!

1. Use MTKDroidTools to create a scatter file and read back the ROM using SP FlashTool to backup phone memory. 2. Open the backed up ROM file in MTK Droid Root & Tools to generate a CWM recovery file. 3. Flash the new CWM recovery file to the phone's recovery partition using SP FlashTool while being careful to only flash the recovery block.

Uploaded by

Anonymous 4TfVSnIrnB
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
67 views

After Creation of Scatter Don't Close The Main Window of The Program!

1. Use MTKDroidTools to create a scatter file and read back the ROM using SP FlashTool to backup phone memory. 2. Open the backed up ROM file in MTK Droid Root & Tools to generate a CWM recovery file. 3. Flash the new CWM recovery file to the phone's recovery partition using SP FlashTool while being careful to only flash the recovery block.

Uploaded by

Anonymous 4TfVSnIrnB
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

[GUIDE] How to ReadBack ROM using SP FlashTool, to make the CWM

recovery, to install SuperUser (get root) etc..


If your phone not rooted using the ROOT button.

1. Make scatter by means of MTKDroidTools


Scatter is the text file with addresses of the blocks, necessary for the SP FlashTool
program.
After creation of scatter don't close the main window of the program! Otherwise once
again it is necessary to turn on phone.

2. In SP FlashTool choose this scatter and go on the Read Back tab.

3. Choose path and a ROM file name


Click on Add button. Double click of a mouse on the appeared line. Choose a file
name, the name has to begin with ROM_ as offers FlashTool! Remember path and the
name of ROM_ file.

4. Determine the ROM_ size


Type has to stand in HEX. In the field of Start Address it is necessary to write down
0x000000. In the field of Length we copy from scatter the address of the block
following after RECOVERY or the address of other block for fuller backup. For phones
with type of the blocks EXT4 it is the cache block address. The number in the Hex
format has to begin with 0x

5 . Choose Read Page Only on yaffs2 type blocks phones


In FlashTool choose Read Page Only in the field of Read Method. If this field isn't
present, the window with this question can emerge, too we choose Page Only. On
phones with EXT4 blocks it doesn't get out (as a rule).

6. Read Back ROM_


Click on Read Back button and connect the switched-off phone to PC. Here the
options depending on a concrete phone are possible. Maybe it is necessary to press
at the same time with connect of a cable the camera or volume buttons. Experiment
and study work with FlashTool in threads with similar phones! On some MT6573
models, for example on B63, it can't be executed with any combinations and only
testpoint need!

7. Prepare files for FlashTool and make CWM


If everything passed without errorss, we open the MTK Droid Root & Tools window
which we left on 1th step. If for some reason the window isn't present, it is necessary
to turn on phone and to connect it to the program. Click on To process file ROM_ from
FlashTool button and choose the ROM_* file saved on the 6th step. At successful
unpacking rom it will be offered to choose CWM from similar phone. Chosen CWM it is
checked on compliance to the connected phone and if ok, the CWM is created.
Starting with v2.4.0 CWM it is made automatically and the file from similar phone
shouldn't be looked for any more!

Аttention! Yaffs2 type blocks from this backup can't be Downloaded to phone, they
aren't correct! Use backup on 9th step if phone have yaffs2 type blocks!
8. Download new CWM to the phone
Start FlashTool, choose scatter in the folder created on the 7th step. Remove marks
from all blocks! Click on RECOVERY and we choose the file CWM in the same folder
which was created on the 7th step. Click Download and connect a cable to PC (phone
has to be switched off) and expect the end of process. DANGEROUS! On this step the
CWM recovery block has to be marked only! Also it is necessary to use only the
Download button and not to use at all the Firmware Upgrade button!

9. Make backup, install SuperUser etc


Load phone in CWM mode, connect to MTK Droid Root & Tools, go on the tab root,
backup, recovery and, pressing on this tab the necessary buttons, we do:
- backup! ! ! (if in phone there is yaffs2 type blocks, do here surely, they received
with readBack on 7th step aren't correct)
- install superuser (often mean "get root" under it)
- and other if need

You might also like