STAAD.

Pro Report BM 04
To: From:

Copy to: Date: Ref:

18/03/2009 ca/ Document1
19:30:00

Job Information
Engineer Checked Approved
Name: ISAAC AMADI
Date: 18-Mar-09 18-Mar-09

Structure Type SPACE FRAME

Number of Nodes 3 Highest Node 3

Number of Elements 2 Highest Beam 2

Number of Basic Load Cases 1

Number of Combination Load Cases 0

Included in this printout are data for:

All The Whole Structure

Included in this printout are results for load cases:

Type L/C Name
Primary 1 UDL
Nodes
X Y Z
Node
(m) (m) (m)
1 0.000 0.000 0.000
2 0.600 0.000 0.000
3 5.325 0.000 0.000
Beams
Length β
Beam Node A Node B Property
(m) (degrees)
1 1 2 0.600 1 0
2 2 3 4.725 1 0

Section Properties
Area Iyy Izz J
Prop Section Material
(cm2) (cm4) (cm4) (cm4)
1 Rect 1.04E 3 45.6E 3 175E 3 124E CONCRETE

1
Materials
E Density α
Mat Name ν
(kN/mm2) (kg/m3) (1/°K)
3 STEEL 205.000 0.300 7.83E 3 12E -6
4 ALUMINUM 68.948 0.330 2.71E 3 23E -6
5 CONCRETE 21.718 0.170 2.4E 3 10E -6

Supports
X Y Z rX rY rZ
Node
(kN/mm) (kN/mm) (kN/mm) (kN-m/deg) (kN-m/deg) (kN-m/deg)
1 Fixed Fixed Fixed - - -
3 Fixed Fixed Fixed - - -

Node Loads : 1 UDL

FX FY FZ MX MY MZ
Node
(kN) (kN) (kN) (kNm) (kNm) (kNm)
2 - -47.000 - - - -

Beam Loads : 1 UDL

Da Ecc.
Beam Type Direction Fa Fb Db
(m) (m)
1 UNI kN/m GY -7.000 - - - -
2 UNI kN/m GY -19.000 - - - -

Beam Maximum Moments

Distances to maxima are given from beam end A.
Length d Max My d Max Mz
Beam Node A L/C
(m) (m) (kNm) (m) (kNm)
1 1 0.600 1:UDL Max -ve 0.000 0.000
Max +ve 0.000 0.000 0.600 -50.038 2 2
4.725 1:UDL Max -ve 0.000 0.000
Max +ve 0.000 0.000 1.969 -80.740

Beam Maximum Shear Forces

Distances to maxima are given from beam end A.
Node Length d Max Fz d Max Fy
Beam L/C
A (m) (m) (kN) (m) (kN)
1 1 0.600 1:UDL Max -ve 0.000 0.000 0.000 85.497
Max +ve 0.000 0.000 2 2
4.725 1:UDL Max -ve 0.000 0.000 0.000 34.297
Max +ve 0.000 0.000 4.725 -55.478

Beam Maximum Axial Forces

Distances to maxima are given from beam end A.
Length d Max Fx
Beam Node A L/C
(m) (m) (kN)
1 1 0.600 1:UDL Max -ve 0.000 0.000
Max +ve 0.000 0.000
2 2 4.725 1:UDL Max -ve 0.000 0.000
Max +ve 0.000 0.000

Reaction Summary
Horizont Vertical Horizon Moment

2
 FX FY FZ MX MY MZ
Node L/C
(kN) (kN) (kN) (kNm) (kNm) (kNm)
Max FX 1 1:UDL 0.000 85.497 0.000 0.000 0.000 0.000
Min FX 1 1:UDL 0.000 85.497 0.000 0.000 0.000 0.000
Max FY 1 1:UDL 0.000 85.497 0.000 0.000 0.000 0.000
Min FY 3 1:UDL 0.000 55.478 0.000 0.000 0.000 0.000
Max FZ 1 1:UDL 0.000 85.497 0.000 0.000 0.000 0.000
Min FZ 1 1:UDL 0.000 85.497 0.000 0.000 0.000 0.000
Max MX 1 1:UDL 0.000 85.497 0.000 0.000 0.000 0.000
Min MX 1 1:UDL 0.000 85.497 0.000 0.000 0.000 0.000
Max MY 1 1:UDL 0.000 85.497 0.000 0.000 0.000 0.000
Min MY 1 1:UDL 0.000 85.497 0.000 0.000 0.000 0.000
Max MZ 1 1:UDL 0.000 85.497 0.000 0.000 0.000 0.000
Min MZ 1 1:UDL 0.000 85.497 0.000 0.000 0.000 0.000

-47.000 kN

-19.000 kN/m

-7.000 kN/m
0.6 m 4.72 m

FIRST FLOOR BEAM 04 LOADING DIAGRAM

0 kNm 0 kNm
-25.334 kNm
-50.038 kNm
-78.043 kNm

FIRST FLOOR BEAM 04 BENDING MOMENT DIAGRAM

85.497 kN 81.297 kN

34.297 kN

-55.478 kN

FIRST FLOOR BEAM 04 SHEAR FORCE DIAGRAM

3
 Sunday, March 22, 2009, 07:25 PM
STAAD SPACE -- PAGE NO. 5

====================================================================

B E A M N O. 1 D E S I G N R E S U L T S - FLEXURE

LEN - 600. mm FY - 410. FC - 20. SIZE - 230. X 450. mm

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

mm mm mm STA END
-------------------------------------------------------------------

1 33. 2- 16 MM 0. 600. YES YES

-------------------------------------------------------------------
Deflection Check As Per Clause 3.4.6
------------------------------------
Support Condition: Continuous Basic Span/Eff. Depth Ratio = 26
Modification Factor For Tension Reinforcement = 1.55
Modification Factor For Compression Reinforcement = 1.00
Modified Basic Span/Effective Depth Ratio = 40.38
Member Span = 600 mm. Effective Depth = 416 mm.
Actual Span/Effective Depth Ratio = 1.44
******* Deflection Check Satisfactory. *******
-------------------------------------------------------------------

B E A M N O. 1 D E S I G N R E S U L T S - SHEAR

PROVIDE SHEAR LINKS AS FOLLOWS

|----------------------------------------------------------------|
| FROM - TO | MAX. SHEAR | LOAD | LINKS | NO. | SPACING C/C |
|----------------|------------|------|-------|-----|-------------|
| END 1 200 mm | 85.5 kN | 1 | 8 mm | 2 | 199 mm |
| 200 300 mm | 84.1 kN | 1 | 8 mm | 2 | 49 mm |
| 299 END 2 | 81.3 kN | 1 | 8 mm | 3 | 149 mm |
|----------------------------------------------------------------|

====================================================================

B E A M N O. 2 D E S I G N R E S U L T S - FLEXURE

LEN - 4725. mm FY - 410. FC - 20. SIZE - 230. X 450. mm

LEVEL HEIGHT BAR INFO FROM TO ANCHOR

mm mm mm STA END
-------------------------------------------------------------------

1 33. 3- 16 MM 0. 4725. YES YES

C:\isaac files\DOCUMENTS\Goodluck\calculations\STAAD CALCS\BM 04.anl Page 5 of 6

 Sunday, March 22, 2009, 07:25 PM
STAAD SPACE -- PAGE NO. 6

-------------------------------------------------------------------
Deflection Check As Per Clause 3.4.6
------------------------------------
Support Condition: Continuous Basic Span/Eff. Depth Ratio = 26
Modification Factor For Tension Reinforcement = 1.20
Modification Factor For Compression Reinforcement = 1.00
Modified Basic Span/Effective Depth Ratio = 31.15
Member Span = 4725 mm. Effective Depth = 416 mm.
Actual Span/Effective Depth Ratio = 11.33
******* Deflection Check Satisfactory. *******
-------------------------------------------------------------------

B E A M N O. 2 D E S I G N R E S U L T S - SHEAR

PROVIDE SHEAR LINKS AS FOLLOWS

|----------------------------------------------------------------|
| FROM - TO | MAX. SHEAR | LOAD | LINKS | NO. | SPACING C/C |
|----------------|------------|------|-------|-----|-------------|
| END 1 787 mm | 34.3 kN | 1 | 8 mm | 5 | 196 mm |
| 2756 END 2 | 55.5 kN | 1 | 8 mm | 9 | 246 mm |
|----------------------------------------------------------------|

********************END OF BEAM DESIGN**************************

52. END CONCRETE DESIGN

53. FINISH

*********** END OF THE STAAD.Pro RUN ***********

**** DATE= MAR 22,2009 TIME= 19:24:36 ****

***********************************************************
* For questions on STAAD.Pro, *
* Please contact : Research Engineers Ltd. *
* E2/4,Block GP, Sector-V,Salt Lake, KOLKATA - 700 091 *
* India : TEL:(033)2357-3575 FAX:(033)2357-3467 *
* email : [email protected] *
* US : Ph-(714) 974-2500, Fax-(714) 921-0683 *
***********************************************************

C:\isaac files\DOCUMENTS\Goodluck\calculations\STAAD CALCS\BM 04.anl Page 6 of 6