Project Spreadsheets to Eurocode 2 TDE

Client Advisory Group Made by Date Page

Location 2ND FLOOR- 2S1 (Corner) F to G: 1 to 2 SMA 01-Nov-2016 130
2-WAY SPANNING INSITU CONCRETE SLABS to EN 1992-1:2004 and standard tables Checked Revision Job No
Originated from TCC94.xls v3.0 © 2003-2007 TCC KHT - R68

DIMENSIONS MATERIALS STATUS VALID DESIGN

short span, lx m 2.33 fck MPa 30 c 1.50 F G
long span, ly m 2.90 fyk MPa 460 s 1.15 Edge 1
h mm 150 Density kN/m³ 25 (Normal weight) 1

Lx = 2.325 m
Top cover mm 25 Wk mm 0.3
Btm cover mm 25 ∆c,dev mm 10

Edge 4

Edge 2
LOADING characteristic EDGE CONDITIONS
Self weight kN/m² 3.75 Edge 1 D C = Continuous
Extra dead kN/m² 1.50 Edge 2 C D = Discontinuous Ly = 2.9 m
Total Dead, gk kN/m² 5.25 γG = 1.35 Edge 3 C
Imposed, qk kN/m² 1.50 γQ = 1.50 Edge 4 C 2
Design load, n kN/m² 9.34 PLAN Edge 3

SHORT LONG EDGE 1 EDGE 2 EDGE 3 EDGE 4 EC2

MAIN STEEL SPAN x SPAN y Free Continuous Continuous Continuous Reference

ßs 0.044 0.028 0.000 0.037 0.059 0.037 Table 3.14
M kNm/m 2.2 1.4 0.0 1.9 3.0 1.9
d mm 120.0 110.0 120.0 110.0 120.0 110.0
k' 0.207 0.207 0.207 0.207 0.207 0.207 5.5 (4)
k 0.005 0.004 0.000 0.005 0.007 0.005
Z mm 114.0 104.5 114.0 104.5 114.0 104.5 Fig 3.5
As req mm²/m 49 33 0 44 66 44
As min mm²/m 196 180 196 180 196 180 9.2.1.1(1)
As deflection mm²/m 49 ~ ~ ~ ~ ~
Ø mm 10 10 10 10 10 10
Layer B1 B2 T1 T2 T1 T2
@ mm 200 200 200 200 200 200
As prov mm²/m 393 393 393 393 393 393
= % 0.327 0.357 0.327 0.357 0.327 0.357
S max mm 400 400 400 400 400 400 Table 7.3
DEFLECTION
x= mm 17.9 33.2 34.9 33.2 34.9 33.2
c = MPa 1.45 0.56 0.00 0.74 1.04 0.74 7.2 (3)
s = MPa 150.5 23.5 0.0 31.4 46.3 31.4 7.4.2 (2)
 = 0.041 0 = 0.548 Bae ratio = 1148.38 Mod factor = 0.017 Eqn 7.16

Perm L/d = 19.38 Actual L/d = 19.38

TORSION STEEL BOTH EDGES DISCONTINUOUS ONE EDGE DISCONTINUOUS Bottom steel
Ø mm 10 X Y X Y not curtailed in
As req mm²/m 196 196 edge strips at
As prov T mm²/m 5000 5000 393 393 free edges
Additional As T req mm² 0 0 0 0

SUPPORT REACTIONS (kN/m char uno) Over central ¾ of supporting beams Sum ßvx = 0.756
EDGE 1 EDGE 2 EDGE 3 EDGE 4 Sum ßvy = 0.720
1, F-G G, 2-1 2, F-G F, 2-1
ßv 0.302 0.360 0.454 0.360
Dead kN/m 3.69 4.39 5.54 4.39
Imposed kN/m 1.05 1.26 1.58 1.26
Vs kN/m 6.6 7.8 9.8 7.8
OUTPUT/SUMMARY
SHORT LONG EDGE 1 EDGE 2 EDGE 3 EDGE 4
PROVIDE SPAN SPAN 1, F-G G, 2-1 2, F-G F, 2-1
MAIN STEEL T10 @ 200 B1 T10 @ 200 B2 T10 @ 200 T1 T10 @ 200 T2 T10 @ 200 T1 T10 @ 200 T2

ADDITIONAL CORNER 1 CORNER 2 CORNER 3 CORNER 4

TORSION STEEL F1 G1 G2 F2
X direction placed in edge strips
Y direction

CHECKS BAR Ø SINGLY MIN MAX GLOBAL

Lx > Ly < COVER REINFORCED SPACING SPACING DEFLECTION STATUS
OK OK OK OK OK OK VALID DESIGN