Scribd
Upload
110 views

Sensor Vibracion

The document describes a dual output acceleration and temperature sensor. The sensor measures both vibration and temperature and is designed for condition monitoring applications. It has features like rugged design, corrosion resistance, ESD protection, and reverse wiring protection. It is suitable for monitoring in industries like pulp and paper, mining, power generation, and steel.

Uploaded by

Gustavo Gustavo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
110 views

Sensor Vibracion

The document describes a dual output acceleration and temperature sensor. The sensor measures both vibration and temperature and is designed for condition monitoring applications. It has features like rugged design, corrosion resistance, ESD protection, and reverse wiring protection. It is suitable for monitoring in industries like pulp and paper, mining, power generation, and steel.

Uploaded by

Gustavo Gustavo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Dual output acceleration and

temperature sensor
RVT/TT-125 Code: 600-10026

Key features

• Combined acceleration and tempera-


ture measurement
• Rugged design
• Corrosion resistant
• Hermetic seal
• ESD protection
• Reverse wiring protection
• Top exit connector

RVT/TT-125 is an industrial accelerometer with RVT/TT-125 is suitable for machine monitoring in e.g.
internal temperature sensor. Dual output sensor is an following industries:
optimal solution for condition monitoring applica- • Pulp and Paper
tions that utilize both vibration and temperature • Mining and mineral industry
measurements. • Power generation
• Steel industry
RVT/TT-125 specifications

Dynamic Sensitivity, ±5%, 25 °C 100 mV/g


Acceleration range 80 g peak
Amplitude nonlinearity 1%
Frequency response
±10% 1...7 000 Hz
±3 dB 0.5...12 000 Hz
Resonance frequency, mounted, min. 30 kHz
Transverse sensitivity, max. 5% of axial
Temperature response ±10% (-25...+120 °C)

Temperature Sensitivity 10 mV/°C


Temperature measurement range +2... +120 °C

Electrical Power requirement


Voltage source 18...30 VDC
Bias current 2...10 mA
Output impedance, max. 100 Ω
Bias output voltage, nominal 12 VDC
Grounding Case isolated, internally shielded

Environmental Temperature range -50...+120 °C


Vibration limit 500 g
Shock limit, min. 5 000 g
Sealing Hermetic

Physical Sensing element design PZT ceramic, shear


Weight 90 g
Case material 316L stainless steel
Mounting M8 integral stud, (6 Nm max. Torque)
Output connector 3 pin, MIL-C-5015 style
Pin A Accelerometer signal/power
Pin B Accelerometer and temperature sensor common
Pin C Temperature sensor signal
© Valmet Corporation, BR81082_EN_01 04/2015

For more information, contact your local Valmet office. www.valmet.com

Specifications in this document are subject to change without notice.


Product names in this publication are all trademarks of Valmet Corporation.

You might also like