Scribd
Upload
155 views

SUMPIT

This document contains the results of a pipe flow design project using Pipe Flow Expert software. It includes details on the pipe network such as pipe sizes, lengths, flow rates, pressures, and energy losses. The network consists of two HDPE pipes (P1 and P2) transferring 7.2 m3/hour of water from a tank (N1) to a demand point (N3), with a join point (N2) in between. The software calculated expected pressures, flows, velocities and energy losses throughout the system.

Uploaded by

hung
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
155 views

SUMPIT

This document contains the results of a pipe flow design project using Pipe Flow Expert software. It includes details on the pipe network such as pipe sizes, lengths, flow rates, pressures, and energy losses. The network consists of two HDPE pipes (P1 and P2) transferring 7.2 m3/hour of water from a tank (N1) to a demand point (N3), with a join point (N2) in between. The software calculated expected pressures, flows, velocities and energy losses throughout the system.

Uploaded by

hung
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 7

Pipe Flow Design 1

Results Data
Pipe Flow Software - Project 1 - PF Expert Solution 13 April, 2018

Color of Pipe: Flow Rate in m³/hour Pipe Flow Expert Results Key
7.2 7.2 7.2 7.2 7.2 7.2 f = flow in m³/hour

P1, f=7.200 P2, f=7.200


P
N2 0.0m N3, 3.0m
N1, -1.0m 0.3917 bar.g p =0.0000bar.g
0.0 bar.g@ 1.0m
0.0979 bar.g

Designed using Pipe Flow Expert from www.pipeflow.com Page 2


Pipe Flow Software - Project 1 - PF Expert Solution 13 April, 2018

Fluid Data

Zone Fluid Name Chemical Formula Temperature °C Pressure bar.g Density kg/m³ Centistokes Centipoise Vapour Pressure State
bar.a
1 Water H2O 20.000 0.0000 998.000 1.000 1.002 0.024000 Liquid

Designed using Pipe Flow Expert from www.pipeflow.com Page 3


Pipe Flow Software - Project 1 - PF Expert Solution 13 April, 2018

Pump Data

Pipe Id Pipe Name Pump Name Speed rpm Pref. Op Pref. Op To Flow In/Out Velocity Suction Discharge Pump Head Pump Pump Pump Pump
From m³/hour m³/hour m/sec Pressure Pressure (+) m.hd NPSHr NPSHa Efficiency Power
m³/hour bar.g bar.g Fluid m.hd m.hd Percentage Kilowatts
(absolute) (absolute)
1 P1 Pump Set Flow 7.200 0.494 -0.0004 0.3925 4.014 Not known 10.104 Not known Not Known
Rate

Designed using Pipe Flow Expert from www.pipeflow.com Page 4


Pipe Flow Software - Project 1 - PF Expert Solution 13 April, 2018

Pipe Data

Pipe Id Pipe Name and Material Inner Diameter Roughness mm Length m Total K Mass Flow Flow m³/hour Velocity m/sec Entry Pressure Exit Pressure
Notes mm kg/sec bar.g bar.g
1 P1 80 mm HDPE 71.780 0.001500 3.048 0.0000 1.9960 7.200 0.494 0.0979 0.3917
SDR 11 (160
psi)
2 P2 80 mm HDPE 71.780 0.001500 220.000 10.9600 1.9960 7.200 0.494 0.3917 0.0000
SDR 11 (160
psi)

Designed using Pipe Flow Expert from www.pipeflow.com Page 5


Pipe Flow Software - Project 1 - PF Expert Solution 13 April, 2018

Node Data

Node Id Node Type Node Elevation m Liquid Level m Surface Press. Press. at Node HGL at Node Demand In Demand Out Total Flow In Total Flow Out
bar.g bar.g m.hd Fluid m³/hour m³/hour m³/hour m³/hour
1 Tank N1 -1.000 1.000 0.0000 0.0979 0.000 N/A N/A 0.000 7.200
2 Join Point N2 0.000 N/A N/A 0.3917 4.002 0.000 0.000 7.200 7.200
3 Demand N3 3.000 N/A 0.0000 0.0000 3.000 N/A N/A 7.200 0.000
Pressure

Designed using Pipe Flow Expert from www.pipeflow.com Page 6


Pipe Flow Software - Project 1 - PF Expert Solution 13 April, 2018

Energy Data

Pipe Id Pipe Name Energy Loss To Energy Loss To Energy Loss To Energy Loss To Energy Loss To SUBTOTAL Loss Energy Loss To Energy Loss To TOTAL USED
Pipe Friction Pipe Fittings Pipe Components Pipe Control Pump Pipe Items Discharge Change in Sum of All Items
Valves Inefficiency +Pump Pressure Elevation
Kilowatts Kilowatts Kilowatts Kilowatts Kilowatts Kilowatts Kilowatts Kilowatts Kilowatts
1 P1 0.000235 0.000000 0.000000 0.000000 Efficiency Not 0.000235 0.000000 0.019574 0.019809
Specified
2 P2 0.016946 0.002672 0.000000 0.000000 N/A 0.019618 0.000000 0.058722 0.078340

Designed using Pipe Flow Expert from www.pipeflow.com Page 7

You might also like