0% found this document useful (0 votes)
525 views1 page

INSPECTION CERTIFICATE (3.1) - Chemical Analysis TEST REPORT (2.2) - Mechanical Properties

This inspection certificate provides the chemical analysis and mechanical properties test results for a shipment of ESAB OK 48.04 4.0x400mm welding wire. The chemical analysis confirms the wire composition is within specification. Mechanical testing shows the wire has a typical tensile strength of 480 MPa and impact values of 110 J at -30°C and 100 J at -40°C. The wire was produced under a quality assurance program meeting the ISO 9001 standard.

Uploaded by

gst ajah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
525 views1 page

INSPECTION CERTIFICATE (3.1) - Chemical Analysis TEST REPORT (2.2) - Mechanical Properties

This inspection certificate provides the chemical analysis and mechanical properties test results for a shipment of ESAB OK 48.04 4.0x400mm welding wire. The chemical analysis confirms the wire composition is within specification. Mechanical testing shows the wire has a typical tensile strength of 480 MPa and impact values of 110 J at -30°C and 100 J at -40°C. The wire was produced under a quality assurance program meeting the ISO 9001 standard.

Uploaded by

gst ajah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

INSPECTION CERTIFICATE (3.

1) - Chemical analysis
TEST REPORT (2.2) - Mechanical properties

Date: 2016-11-22 Certificate number: EC24536103 rev. 0

Our order: Your order:


Our reference: Your reference:
Customer number: NA Your fax number:
Customer order date: Your e-mail:

Invoice address Receiver of certificate Delivery address


NA

DELIVERY Lot number: PLQ45014 Quantity:

PRODUCT CHEMICAL COMPOSITION


Brand: ESAB
Description: OK 48.04 4.0x400mm Actual results: acc to EN 10204 - 3.1
Item number: 480440HNR0
All weld metal
CLASSIFICATIONS
Auxiliary:
SFA/AWS A5.1: E7018
EN ISO 2560-A: E 42 4 B 32 H5 C 0.05%
Si 0.34%
Mn 1.12%
P 0.013%
S 0.011%
Cr < 0.1%
MECHANICAL PROPERTIES Ni < 0.1%
Typical data: acc to EN 10204 - 2.2 Mo < 0.1%
Nb < 0.01%
Standard: Cu 0.03
V 0.01%
Auxiliary:
Condition:

TENSILE
ReL Rm A5
480 MPa 560 MPa 28 %

IMPACT
Temp -30 °C -40 °C
KV 110 J 100 J

COMMENTS

Product supplied under a QA Programme fulfilling the EN ISO 9001 standard.


This certificate is produced electronically and is valid without signature.
Please refer any queries to:
PT Esabindo Pratama; Pulogadung; Indonesia; Tel : 62-21-460 0188; Fax : 62-21-461 2929

Validation - Chemical Analysis Validation - Others


Shaharrudin Ismail Quality Assurance Manager J-P Ernoult Product Manager

You might also like