OBEYING THE RULES

Over the centuries, typographic guidelines have been developed

to provide consistency and competency within the profession,
to preserve the beauty and legibility of typographic form, and to
ensure that typography functions as often mandated: to clearly
represent the thoughts of the author.
For text type, use
The guidelines presented…are not absolute or definitive, but
they are representatives of a sturdy, time-tested collection of line spacing that
typographic “rules.” They are presented here to provide a context
for informed typographic exploration. In other words, rules must easily carries the
first be understood before they can be broken. Once it is known
how to obey rules, one can freely journey into unconventional eye from one line to
terrain.
the next.
For optimum Lines of type with too little space between them slow the reading
process; the eye is forced to take in several lines at once. By

legibility, choose adding one to four points of space between lines of type—
depending on the specific nature of the typeface—readability can

classical, time- be improved.

tested typefaces For optimum

with a proven track readability,
record. use a flush left,
Well-seasoned typographic designers can usually count their
favorite typefaces on one hand. Most often, they are those
Avoid using too ragged right type
typefaces that are drawn and crafted with consistency among
characters, and those that exhibit highly legible proportions.
many different type alignment.
Be mindful not sizes and weights at Although in special situations, other methods of type alignment
(flush right, ragged left; centered, and justified) are acceptable,

to use too many the same time. the trade-off is always a loss—however slight—in readability.

different typefaces You only need to use as many different sizes and weights as
needed to establish a clear hierarchy of information. Josef Strive for
at any one time. Müller-Brockmann advocates using no more than two sizes, one
for display titles and one for text type. Restraint in the number of consistent,
The primary purpose for using more than one typeface is to
create emphasis or to separate one part of the text from another.
sizes used leads to functional and attractive pages.
rhythmic rags.
When too many different typefaces are used, the page becomes a
three-ring circus, and the reader is unable to determine what is Use text types of Avoid rags in which strange and awkward shapes are formed
as a result of line terminations Also avoid rags that produce a
and what is not important.
book weight. repetitious and predictable pattern of line endings. The purpose
of effective rags is not only to achieve aesthetic beauty. When rags

Avoid combining Avoid typefaces consist of line endings that are carefully articulated, rhythmic,
and consistent, they enable readers to move gently and effortlessly

typefaces that are appearing too heavy down a text column. Rags provide logical points of departure
from one line to the next.

too similar in or too light. Always maintain the

appearance. The weight of typefaces is determined by the thicknesses of the Clearly indicate integrity of type.
letter strokes. Text typefaces that are too light cannot easily be
distinguished from their backgrounds. In typefaces that are too paragraph, but be Avoid arbitrarily
If the reason for combining typefaces is to create emphasis, it is
important to avoid the ambiguity caused by combining types that
heavy, counterforms diminish in size, making them less legible.
Book weights strike a happy medium, and are ideal for text. careful not to upset stretching letters.
are too similar in appearance. When this occurs, it usually looks
like a mistake, because not enough contrast exists between the integrity and Well designed typefaces exhibit visual qualities that make
the typefaces.
Use typefaces of visual consistency them readable. Letters are painstakingly designed with specific
proportional attributes in mind. Arbitrarily distorting them

Text set in all medium width. of the text. compromises their integrity.

capital letters Avoid typefaces The two most common means of indicating paragraphs are
Always align letters
severely retards extremely wide or by indenting or inserting additional (vertical) space between
paragraphs. It is not necessary to indent the first paragraph in a
and words on the
reading. Use upper- narrow in width. column of text.

baseline.
and lower-case Distorting text to make letters wider or narrower by stretching or
squeezing them with a computer impedes the reading process. Avoid widows and Letters are designed to coexist side-by-side on an invisible

letters for optimum The proportion of such letters are no longer familiar to us. Well
designed type families include condensed and extended faces that orphans whenever baseline. When they stray from this orientation, they appear to be
out of control, their readability greatly compromised.

readability. fall within accepted proportional norms.

possible.
Lower-case letters provide the necessary visual cues to make
For text type, use (or, more humanely, When working
text most readable. This is due to the presence of ascenders ,
descenders, and the varied internal patterns of lower-case letters.
consistent letter take care of them!) with type and
Using both upper- and lower-case letters is the most normative
means for setting text type, and a convention to which readers are
and word spacing A widow is a word or very short line at either the beginning or color, ensure that
most accustomed. Upper-case letters can successfully be used for
display type, however.
to produce an even,
the end of a paragraph. An orphan is a single syllable at the end
of a paragraph. (note: you will find quite a variety of definitions sufficient contrast
uninterrupted
of these terms) Both of these lonely conditions should be avoided
whenever possible, for they destroy the continuity of text blocks, exists between type
For text type, use texture.
create spotty pages, and interfere with concentration
in reading. and its background.
sizes that according Whether a single word at the end of paragraph is objectionable is Too little contrast in hue, value, or saturation, or a combination of

to legibility Letters should flow gracefully and naturally into words, and
words into lines. This means that word spacing should increase
dependent on context. In narrow columns, a multi-syllabic word
might be sufficient to hold its own line.
these factors, can result in type that is difficult, if not impossible,
to read.

studies prove most proportionally as letter spacing increases.

On the other hand, in a wide measure, two very short words

readable. Use appropriate line

might not be enough.
Always use
These sizes generally range from 8 to 12 points (and all sizes in
lengths. Lines that Emphasize elements professional
between) for text that is read from an average distance of 12 to
14 inches. However, it is important to be aware of the fact that
are too short or within text with typesetting
typefaces of the same size may actually appear different in size
depending upon the x-height of the letters (the distance between
too long disrupt discretion and punctuation and
the baseline and the meanline).

tHE reading process. without disturbing spacing standards.

When lines of type are either too long or too short, the reading
process becomes tedious and wearisome. As the eye travels along
the flow of reading. Many well-known practices are rooted in the limitations of
typewriters and carried over into word processing and desk-top
publishing. Professional typesetting conventions use the full
overly long lines, negotiating the next line becomes difficult. Never overdo it. Use minimum means for maximum results. The range of character sets and proportional spacing built into digital
Reading overly short lines creates choppy eye movements that ultimate purposes for emphasizing elements within text are to type.
Designed by Evan Stremke tire and annoy the reader. clarify content and distinguish parts of information.