GENERATOR TESTING

APPLICATION GUIDE

www.haefely-hipotronics.com

reliable.
precision.
2 GENERATOR TESTING

CONTENTS
Product Line Overview 3

AC Hipot Testing 4

Partial Discharge Measurement 5

DC Hipot Testing 6

Insulation Resistance 6

Power Factor / C & Tan δ 7

GENERATOR TESTING
A generator is tested several times throughout its lifetime - after being manufactured, once installed onsite,
during periodic maintenance checks, etc. Generator manufacturers, service / maintenance companies and
those in the hydro power / wind power / mining / offshore industries use HAEFELY HIPOTRONICS products
to perform such tests.

Our test equipment is what makes performance monitoring, quality inspections and insulation evaluations of
generators quick and easy.

MARKET SEGMENTS

MANUFACTURERS OF
ROTATING MACHINES MINING

OFFSHORE
POWER INDUSTRY

WIND

ONSITE SERVICE:
MAINTENANCE, HYDRO
TESTING, REPAIR
 PRODUCT LINE OVERVIEW 3

PRODUCT LINE OVERVIEW

HAEFELY HIPOTRONICS offers the widest range of test equipment on the market for generators in both
marine and industrial applications. Below are the most in-demand products for such testing.

PRODUCT

IES

8X

0
b

37
IES

SER
IES

52
21

+3
78
ER

1
S ER

S+
C
X9

L-D

54
0S

23
DA
DD
TSR

0P
70

28
MI
80
AC HIPOT TESTING • •
DC Testing

PARTIAL DISCHARGE •
TYPE OF TEST

DC HIPOT TESTING •
INSULATION RESISTANCE /
POLARIZATION INDEX
•
POWER FACTOR / C & TAN δ • •

RELIABLE AND
USER-FRIENDLY
4 AC
VEHICLE-MOUNTED
HIPOT TESTING FAULT LOCATORS

AC HIPOT TESTING
TANK RESONANT SYSTEMS
AC resonant test systems with low Q values are needed for testing high capacitive loads with high loss
- i.e. generator stator and rotor windings. Our Tank Series Resonant (TSR) systems, as part of a series
resonant circuit, provide undistorted high voltage at system frequency. They are designed to ensure your
generators are tested in accordance with the latest standards.

The systems below can be configured for either series or parallel operation. All major high voltage
components in the TSR system listed are in one, single enclosure (pictured below).

Max. Load (nF) **

A)

)
(kV

e (m

t
Siz te

Tap 1, Tap 2

(kg eigh
a
bin xim
e
ng

D
g

W
lta
ati

Ca ppro

)
et

et TSR SERIES
Vo

H
rR

bin
50 Hz 60 Hz
x
A
we

Tap

Ca
Po

TSR30-300 300 30 / 15 1.6 x 2 x 2.7 4000 1061, 4244 884, 3536

DC Testing

TSR60-600 600 60 / 30 2 x 2 x 2.7 4500 530, 2122 442, 1768

MODEL

TSR60-750 750 60 / 30 2 x 2 x 2.7 5000 663, 2652 552, 2210

TSR60-1M2 1200 60 / 30 2 x 2.3 x 2.7 5500 1061, 4244 884, 3536

TSR75-750 750 75 / 50 2 x 2 x 2.7 5000 424, 954 353, 795

*This is a list of standard models used for generator testing. Please consult factory for other
voltage and current ratings. **Max. loads do not include the preload provided with generator
test systems. The true maximum load capability is outlined in detailed quote specifications.

AC DIELECTRIC SYSTEMS
The most common test for manufacturers and service groups is a high voltage AC dielectric withstand
test. The test involves applying AC voltage to a winding to verify if it can withstand an applied voltage.
This confirms the quality of a new generator, as well as validates the insulation condition after it’s been
installed. The 700 Series AC dielectric test sytstems are designed to perform such tests in accordance
with IEC60, IEEE 4, IEC270 and other test standards.
A)

700 SERIES
V)

ller
(m
(k

o
nt
ge

ntr
rre
lta

Co
Cu
Vo

710-2 10 200 Auto / Manual PLC

DC Testing

710-5 10 500 Auto / Manual PLC

MODEL

710-10 10 1000 Auto / Manual PLC

730-60 30 2000 Auto / Manual PLC

750-100 50 2000 Auto / Manual PLC

775-200 75 2667 Auto / Manual PLC

*This is a list of standard models used for generator testing. Please consult factory for other voltage and current ratings.
Also note that standard input frequency is 50 or 60 Hz.
 PARTIAL PORTABLE
DISCHARGEFAULT
MEASUREMENT
LOCATORS 5

PARTIAL DISCHARGE
DDX9121b
The DDX9121b partial discharge measuring system is the latest in the DDX family of PD detection
equipment. It is modular and fits a wide range of applications, including generator testing.

This unit covers traditional PD measurement according to IEC60270, Radio Interference Voltage (RIV)
measurement and DC partial discharge measurement. The DDX9121b is also capable of simple Pass /
Fail testing to advanced phase resolution time analysis.

DDX9121b & MIDAS can easily perform

combined partial discharge and C & Tan δ tests
without any reconnections. The MIDAS (pg.
7) has a reduced inherent PD level of < 500
pC and can therefore be used for PD testing
on rotating machines such as generators.

DDX9121b

FEATURES BENEFITS
a Simultaneous RIV and PD reading  Set up, control, test, monitor and generate
a User-defined measuring band test reports from a single computer
a Modular design (stack up to 9 units)  Windows-based software makes for easy
a Data acquisition operation with little to no training
a AC and DC measuring modes  Compact design, standard BNC measuring
a Embedded switch with 4 PD inputs cables and remote control capabilities
per detector make it easy to integrate into test systems
6 DC HIPOT TESTING & INSULATION RESISTANCE ANALYSIS

DC HIPOT TESTING
800 SERIES
HAEFELY HIPOTRONICS’ 800 Series of portable DC Hipot testers are made for testing generators and other
electrical apparatus in the field. The series consists of a digitally controlled single-unit design that ranges from
40 kV to 80 kV as well as an analog, two-unit design that ranges from 120 kV to 170 kV.

Accurate voltage and current measurements are assured via voltage readings that are taken directly
at the output of the high voltage transformer as well as current measurements that are taken in the
return leg. The product also uses a natural, ester-based fluid (FR3) for added benefit to the customer.

TEST VOLTAGE

kV
kV
kV

0k
V
V
V

0k
0k

70
20
5k

80

10

≤1
≤1
≤6
≤3
≤1

840PL-DC • •
DC Testing
AC Testing

880PL-DC • • • •
MODEL

800PL-DC SERIES
8120 • • • • • •

8170 • • • • • • •

FEATURES BENEFITS
a Full-wave voltage doubling rectifier  Ideal for field testing applications
a Zero start interlock and guard circuit  Simple control panel
a Internal discharge solenoid  Minimal set-up time

INSULATION RESISTANCE
5478
The 5478 portable teraohmmeter is a multi-purpose digital tester intended for analyzing, inspecting
and maintaining high voltage insulation. Insulation in generators can fail due to excessive heat, moisture,
dirt, vibration and / or aging. To detect such deterioration, it is necessary to perform regular insulation
resistance tests.

MEASUREMENTS
a Insulation resistance up to 5 TOhm
a Step-up voltage measurement 5478
a Withstand voltage measurement
a Diagnostic measurements
a AC / DC voltage and frequency measurements
 POWER FACTOR / C & TAN δ MEASUREMENT 7

POWER FACTOR / C TAN δ

MIDAS

Electrical insulation of generators undergo aging processes due to thermal overload, mechanical
stress, electrical impurity (voids, foreign particles) and environmental factors (temperature, humidity).
High voltage insulation will ultimately fail, unless checked and handled with proper action.

Taking Capacitance and Tan δ measurements with the portable Mobile Insulation Diagnosis &
Analyzing System (MIDAS) is one of the best parameters for keeping track of insulation health. Test
methods for determining power / dissipation factor are stated in standard specifications (e.g. VDE
0530 Part I, IEC 34-1, EN 50209:1999, IEC 216, IEEE 286-2000).

The MIDAS 2881G is specifically designed for rotating machines. With its unique 15 kV output voltage, it has
more power to test large capacitances up to 47 nF at 60 Hz (or up to 2 uF with the 5289 option).

APPLICATION NOTE MIDAS

TYPICAL VALUES / LIMITS FOR C & TAN δ MEASUREMENT
OUTPUT CON -
VOLTAGE TROLLER
New machines may have measured values
exceeding this specification. Construction of the
machine, corona shields, etc. have a significant V

top
5k

Lap
effect. Therefore a comparison of measurements
≤1

(phase-to-phase, two identical machines or against

previously obtained results) is recommended.
MIDAS 2881G • •
DC

E.g. Single-phase values for a 500 MVA generator.

Values at 1.0 UN (21 kV); C = 0.27 µf; tan δ = 0.014.

tan δ at 0.2 UN max. 0.04

Typical value ≤ 0.02

Δ tan δ (tip-up) max. 0.006 / 0.2UN Tan δ 1x10 -4 / 10 kV* / 33 kVA

from 0.2UN -0.6UN *maximum 12 kV

Δ tan δ (tip-up) max. 0.008 / 0.2UN

from 0.6UN -1.0UN
Tan δ 1x10 -4 / 15 kV / 100 kVA
Or Δ tan δ / kV max. 0.0025

insulation quality can be Δ < 10%

considered as stable Tan δ 1x10 -4 / e.g. 33 kV /
insulation is slowly / quickly Δ > 10% e.g. 700 kVA
degrading / deteriorating

2823 3370 528X

The 2823 measuring bridge is The 3370 Series of SF6 gas-insulated The 5288A & 5289 are automatic
designed for measurement of low standard capacitors is used as resonating inductors used to
dielectric losses and impedances. a comparison standard when increase the power range for
measuring C & Tan δ. testing higher capacitive loads.
OFFICES:
Europe China North America
Haefely Test AG Haefely Test AG Representative Beijing Office Hipotronics, Inc.
Birsstrasse 300 8-1-602, Fortune Street 1650 Route 22 N
4052 Basel No. 67, Chaoyang Road, Chaoyang District Brewster, NY 10509
Switzerland Beijing, China 100025 United States

 + 41 61 373 4111  +86 10 8578 8099  +1 845 279 3644

 + 41 61 373 4912  +86 10 8578 9908  +1 845 279 2467
 [email protected]  [email protected]  [email protected]
HAEFELY HIPOTRONICS has a policy of continuous product improvement. We therefore reserve the right to change design and specification without notice.