OP-TECH
Usage Notes
This CD contains the NON DESTRUCTIVE TESTING on
                             ULTRASONIC TESTING
System requirements:
   This software runs on any IBM compatible Pentium PC having WINDOWS98,
   WINDOWS2000 or WINDOWS XP operating system. It may run on other windows
   platforms though we have not tested this CD on them.
   For good response minimum RAM size of 128 mb is required.
   Please set the video to 800 x 600 with 16 or 32 bit color.
Installation:
   No specific installation is required for running the CD. The Software can be run directly
   from the CD itself.
   The autorun feature is enabled so the software runs just by inserting the CD in the
   CD-ROM drive. In case the autorun feature is disabled you may manually start the
   software by double         clicking on the icon.
   When asked please key in the CD KEY as given in the slip and press “GO” to
   complete the installation process.           UT CD KEY shsihtas
   The software requires Flash Player. In case your system does not have flash player
   installed, you may install it from the CD. The Flash player setup program is available in the
   Flash Player folder in the CD. Alternatively you may also download the latest flash player
   from the site www: macromedia.com for free.
Usage:
   The software runs for about 60 minutes. This time may vary depending on the time the
   student spends on each scene. Between scenes you are requested to press the next
   button to move to the next scene.
   If you notice clipping at the borders, please adjust the video resolution to 800 x 600. This
   can be done by right clicking on any vacant area (non icon area) of the desktop and
   access properties  setting  screen resolution. Move the slider bar as required.
   The print out has been adjusted for an inkjet printer. So the printed output may vary a little
   if a different printer is used. You may adjust the default setting of the printer before starting
   the application to correct any variations.
     The following diagram describes the different buttons and their functionality:
                                           Navigation Buttons:
                                                                                      Close
                                                                                      Button
Chapter          Mute         Next    Previous
Button          Button       Button    Button
 Please note that few of the buttons are active only when voice over is available.
    EXIT
          Exits the application.
PREVIOUS
 Takes you to the previous scene.
NEXT
 Takes you to the next scene. By pressing the PREVIOUS and NEXT buttons in a
 sequence the user may replay the same scene.
                     You may contact us at the following address
                                     OP-TECH
                              No 6/9, VII Cross street,
                               Karpagam Gardens,
                                       Adyar,
                                Chennai – 600 020.
                    Phones: (9144) 24461159      (91) 98406 24625
                       E Mail: [email protected]
                                      shsihtas