Scribd
Upload
547 views4 pages

2.25 Advanced Fluid Mechanics: MIT Department of Mechanical Engineering

Solution Advanced Shapiro

Uploaded by

Bruno Henrique Hoinschy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
547 views4 pages

2.25 Advanced Fluid Mechanics: MIT Department of Mechanical Engineering

Solution Advanced Shapiro

Uploaded by

Bruno Henrique Hoinschy
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

MIT Department of Mechanical Engineering

2.25 Advanced Fluid Mechanics

Problem 7.12
This problem is from “Advanced Fluid Mechanics Problems” by A.H. Shapiro and A.A. Sonin

Consider an incompressible flow through a series of geometrically similar machines such as fans, pumps,
hydraulic turbines, etc. If Q denotes volume flow, ω rotational speed, D impeller diameter, µ fluid viscosity,
and ρ fluid density,

(a) show that dynamic similarity requires that Q/ωD3 and ρQ/µD be fixed.

(b) Show that if Q/ωD3 and ρQ/µD are fixed in a series of tests, then ΔP/ρω 2 D2 must remain constant,
where ΔP is the change in head across the machine, expressed in pressure units.

(c) Find the form of the relation between the work output per unit mass of fluid W , and the the given
variables, in a series of tests where Q/ωD3 and ρQ/µD are fixed.

2.25 Advanced Fluid Mechanics 1 c 2011, MIT


Copyright ©
Dimensional Analysis A.H. Shapiro and A.A. Sonin 7.12

Solution:
(a) The variables in the problem are related through f (Q, ω, D, µ, ρ, ΔP ) = 0 where

Q [L3 T−1 ] : Volume flow rate


ω [T−1 ] : Rotational Speed
D [L] : Impeller diameter
µ [ML−1 T−1 ] : Fluid viscosity
ρ [ML−3 ] : Fluid density
ΔP [ML−1 T−1 ] : Change in head across machine

As our primary variables, we pick ρ for the fluid, ω for the flow and D for the geometry. We have

n = 6 variables
r = 3 primary dimensions
⇒ j = 6 − 3 = 3 dimensionless groups

Now,
Q
Π1 = (7.12a)
ρa ω b D c
By inspection, we find a = 0, b = 1 and c = 3. Therefore
Q
Π1 = (7.12b)
ωD3
Similarly, we find
µ
Π2 = (7.12c)
ρωD2

Let
Π1
Π′ = (7.12d)
Π2
Q ρωD2
= × (7.12e)
ωD3 µ
ρQ
⇒ Π′ = (7.12f)
µD

Therefore, dynamic similarity requires that


Q
Π1 = = C1 (7.12g)
ωD3
ρQ
and Π′ = = C2 (7.12h)
µD
where C1 and C2 are constants.

(b) The third non-dimensional group is given by

ΔP
Π3 = (7.12i)
ρω 2 D2

2.25 Advanced Fluid Mechanics 2 c 2011, MIT


Copyright ©
Dimensional Analysis A.H. Shapiro and A.A. Sonin 7.12

Therefore, from the Buckingham Π theorem,

Π3 = f (Π1 , Π′ ) (7.12j)
ΔP Q ρQ
⇒ = f( , ) (7.12k)
ρω 2 D2 ωD3 µD

Q ′ ρQ
Now if Π1 = ωD 3 and Π = µD are constants, then f (Π1 , Π′ ) = f (C1 , C2 ) = C where C is a constant. Hence,
equation (7.12k) implies
ΔP
=C (7.12l)
ρω 2 D2

(c) The work output w is given by


w = QΔP (7.12m)
We know from equation (7.12h) that Q = C1 ωD3 and from equation 7.12l that ΔP = Cρω 2 D2 . Substituting
this into equation (7.12m), we have

w = C1 Cρω 3 D5 = Kρω 3 D5 (7.12n)

where K is a constant. Thus we have per unit mass that

w
W = = KD2 ω 3 (7.12o)
ρD3

Problem Solution by Aditya Jaishankar, Fall 2011

2.25 Advanced Fluid Mechanics 3 c 2011, MIT


Copyright ©
MIT OpenCourseWare
http://ocw.mit.edu

2.25 Advanced Fluid Mechanics


Fall 2013

For information about citing these materials or our Terms of Use, visit: http://ocw.mit.edu/terms.

You might also like