CCNA Exploration2: Routing Protocols and Concepts–Chapter 1 Exam | N.

J 180 Degree Page 1 of 9

« Free WordPress Headers for Kubrick CCNA Exploration2: Routing Protocols – Search SUBM
Theme Chapter 2 Exam »

CCNA Exploration2: Routing

Protocols –Chapter 1 Exam
01. Which two statements correctly describe the components of a router? (Choose EMAIL SUBSCRIBTION
two.)

z RAM permanently stores the configuration file used Your email:

during the boot sequence.
Enter email address...
z ROM contains diagnostics executed on hardware
modules.
z NVRAM stores a backup copy of the IOS used during Subscribe
the boot sequence.
z Flash memory does not lose its contents during a Unsubscribe
reboot.
z ROM contains the most current and most complete version of the IOS.
z Flash contains boot system commands to identify the location of the IOS.

02.

Microsoft
Active Directory
General
Security
Windows OS's
Windows Server

Unix/Linux
General
CentOS

Which interfaces in the exhibit could be used for a leased line WAN connection? Cisco
(Choose two.)
General
z 1 CCNA
z 2
z 3 Scripts
z 4 Batch file scripts
z 5 Shell script
z 6 VBScripts

03. If a router cannot find a valid configuration file during the startup sequence, WORDPRESS
what will occur?
PHOTOGRPHY
z The startup sequence will reset.
Uncategorized
z The router will prompt the user for a response to enter setup mode.

http://nj180degree.net/2010/03/02/ccnaexploration2ch/ 9/7/2010
CCNA Exploration2: Routing Protocols and Concepts–Chapter 1 Exam | N.J 180 Degree Page 2 of 9

z The startup sequence will halt until a valid configuration file is acquired.
z The router will generate a default configuration file based on the last valid YOUR DONATION IS
configuration. APPRECIATED :)
z The router will monitor local traffic to determine routing protocol configuration
requirements.

04. Which of the following is the correct flow of routines for a router startup?

z load bootstrap, load IOS, apply configuration

z load bootstrap, apply configuration, load IOS
z load IOS, load bootstrap, apply configuration, check hardware ADS
z check hardware, apply configuration, load bootstrap, load IOS

05. What is the default sequence for loading the configuration file?

z NVRAM, FLASH, ROM

z FLASH, TFTP,CONSOLE
z NVRAM, TFTP, CONSOLE
z FLASH, TFTP, ROM

06. From what location can a router load the Cisco IOS during the boot process?
(Choose two.)

z RAM
z TFTP server
z NVRAM
z setup routine
z Flash memory Kaplan
Certification ®
z Terminal New Kaplan Online
CISCO Courses
07. Which are functions of a router? (Choose three.) CCENT, CCNA,
CCNP, CCDA, CCDP.
www.ContinuingEd.Kap
z packet switching
z extension of network segments
z segmentation of broadcast domains
z selection of best path based on logical addressing
z selection of best path based on physical addressing

08. What three processes does a router execute when it receives a packet from
one network that is destined for another network? (Choose three.)

z decapsulates the Layer 3 packet by stripping off the Layer 2 frame header
z uses the destination MAC Address in the IP Header to look up the next-hop
address in the routing table
z leaves the Layer 2 frame header intact when decapsulating the Layer 3 packet
z uses the destination IP Address in the IP header to look up the next-hop address in
the routing table
z encapsulates the Layer 3 packet into the new Layer 2 frame and forwards it out the
exit interface
z encapsulates the Layer 3 packet into a special Layer 1 frame and forwards it to the
exit interface

09. The network administrator needs to connect two routers directly via their

http://nj180degree.net/2010/03/02/ccnaexploration2ch/ 9/7/2010
CCNA Exploration2: Routing Protocols and Concepts–Chapter 1 Exam | N.J 180 Degree Page 3 of 9

FastEthernet ports. What cable should the network administrator use?

z straight-through
z rollover
z cross-over
z serial

10.

BLOGROLL

Online Subnet Calculator

(VLSM/CIDR)

FLICKR GALLERY

Refer to the exhibit. What can be concluded from the output of the running-
configuration of a router?

z The passwords are encrypted.

z The current configuration was saved to NVRAM.
z The configuration that is shown will be the one used on the next reboot.
z The commands that are displayed determine the current operation of the router.

11. Which two statements describe characteristics of load balancing? (Choose

two.)

z Load balancing occurs when a router sends the same packet to different
destination networks.
z Load balancing occurs when the same number of packets are sent over static and
dynamic routes.
z Load balancing allows a router to forward packets over multiple paths to the same
destination network.
z Unequal cost load balancing is supported by EIGRP.
z If multiple paths with different metrics to a destinations exist, the router cannot
support load balancing.

http://nj180degree.net/2010/03/02/ccnaexploration2ch/ 9/7/2010
CCNA Exploration2: Routing Protocols and Concepts–Chapter 1 Exam | N.J 180 Degree Page 4 of 9

12.

Search

Refer to the exhibit. What can be concluded from the routing table output in the
exhibit? (Choose two.)

z This router only has two interfaces.

z The router interfaces are not operational yet.
z This router is configured to forward packets to remote networks.
z The FastEthernet0/0 and Serial0/0/0 interfaces of this router were configured with
an IP address and the no shutdown command.
z An IP packet received by this router with a destination address of 198.18.9.1 will be
forwarded out of the Serial0/0/0 interface.

13.

The serial connection shown in the graphic needs to be configured. Which

configuration commands must be made on the Sydney router to establish
connectivity with the Melbourne site? (Choose three.)

z Sydney(config-if)# ip address 201.100.53.2 255.255.255.0

z Sydney(config-if)# no shutdown
z Sydney(config-if)# ip address 201.100.53.1 255.255.255.224
z Sydney(config-if)# clock rate 56000
z Sydney(config-if)# ip host Melbourne 201.100.53.2

14. Passwords can be used to restrict access to all or parts of the Cisco IOS.
Select the modes and interfaces that can be protected with passwords. (Choose
three.)

z VTY interface
z console interface
z Ethernet interface
z secret EXEC mode
z privileged EXEC mode
z router configuration mode

http://nj180degree.net/2010/03/02/ccnaexploration2ch/ 9/7/2010
CCNA Exploration2: Routing Protocols and Concepts–Chapter 1 Exam | N.J 180 Degree Page 5 of 9

15. What is the outcome of entering these commands?

R1(config)# line vty 0 4

R1(config-line)# password check123
R1(config-line)# login

z ensures that a password is entered before

entering user EXEC mode
z sets the password to be used for
connecting to this router via Telnet
z requires check123 to be entered before the
configuration can be saved
z creates a local user account for logging in
to a router or switch www ManageEngine com/NetFlow Ads by Google

16.

Refer to the exhibit. The network administrator has configured the router with the
interface IP addresses shown for the directly connected networks. Pings from the
router to hosts on the connected networks or pings between router interfaces are
not working. What is the most likely problem?

z The destination networks do not exist.

z The IP addresses on the router interfaces must be configured as network
addresses and not host addresses.
z The interfaces must be enabled with the no shutdown command.
z Each interface must be configured with the clock rate command.

17. A network administrator has just entered new configurations into Router1.
Which command should be executed to save configuration changes to NVRAM?

z Router1# copy running-config flash

z Router1(config)# copy running-config flash
z Router1# copy running-config startup-config
z Router1(config)# copy running-config startup-config
z Router1# copy startup-config running-config
z Router1(config)# copy startup-config running-config

18.

http://nj180degree.net/2010/03/02/ccnaexploration2ch/ 9/7/2010
CCNA Exploration2: Routing Protocols and Concepts–Chapter 1 Exam | N.J 180 Degree Page 6 of 9

Refer to the exhibit. All routers have a route in its routing table to each network
that is shown in the exhibit. Default routes have not been issued on these routers.
What can be concluded about how packets are forwarded in this network?
(Choose two.)

z If RouterC receives a packet that is destined for 10.5.1.1, it will be forwarded out
interface Fa0/0.
z If RouterA receives a packet that is destined for 192.168.3.146, it will be forwarded
out interface S0/0/1.
z If RouterB receives a packet that is destined for 10.5.27.15, it will be forwarded out
interface S0/0/1.
z If RouterB receives a packet that is destined for 172.20.255.1, it will be forwarded
out interface S0/0/0.
z If RouterC receives a packet that is destined for 192.16.5.101, it will be forwarded
out interface S0/0/1.

19. What header address information does a router change in the information it
receives from an attached Ethernet interface before information is transmitted out
another interface?

z only the Layer 2 source address

z only the Layer 2 destination address
z only the Layer 3 source address
z only the Layer 3 destination address
z the Layer 2 source and destination address
z the Layer 3 source and destination address

20.

Refer to the exhibit. Host A pings host B. When R4 accepts the ping into the

http://nj180degree.net/2010/03/02/ccnaexploration2ch/ 9/7/2010
CCNA Exploration2: Routing Protocols and Concepts–Chapter 1 Exam | N.J 180 Degree Page 7 of 9

Ethernet interface, what two pieces of header information are included? (Choose
two.)

z source IP address: 192.168.10.129

z source IP address: BBBB.3333.5677
z source MAC address: 5555.AAAA.6666
z destination IP address: 192.168.10.33
z destination IP address: 192.168.10.134
z destination MAC address: 9999.DADC.1234

21.

Refer to the exhibit. After host 2 is connected to the switch on the LAN, host 2 is
unable to communicate with host 1. What is the cause of this problem?

z The subnet mask of host 2 is incorrect.

z Host 1 and host 2 are on different networks.
z The switch needs an IP address that is not configured.
z The router LAN interface and host 1 are on different networks.
z The IP address of host 1 is on a different network than is the LAN interface of the
router.

Tags: CCNA, CCNA 2, CCNA exam, CCNA2 Routing Protocols and Concepts, Cisco

This entry was posted by Nathan on 02/03/2010 at 7:38 pm, and is filled under CCNA, Cisco. Follow any
responses to this post through RSS 2.0. You can leave a response or trackback from your own site.

http://nj180degree.net/2010/03/02/ccnaexploration2ch/ 9/7/2010
CCNA Exploration2: Routing Protocols and Concepts–Chapter 1 Exam | N.J 180 Degree Page 8 of 9

Name (required)

http://nj180degree.net/2010/03/02/ccnaexploration2ch/ 9/7/2010
CCNA Exploration2: Routing Protocols and Concepts–Chapter 1 Exam | N.J 180 Degree Page 9 of 9

N.J Technical blog by Nathan Joseph is licensed under a Creative Commons Attribution-Noncommercial-Share Alike 2.5

Australia License.
Based on a work at nj180degree.net.
Permissions beyond the scope of this license may be available at Contact Me.

TOP

http://nj180degree.net/2010/03/02/ccnaexploration2ch/ 9/7/2010