305 SOLAR PANEL

EXCEPTIONAL EFFICIENCY AND PERFORMANCE

BENEFITS
Highest Efficiency
SunPowerTM Solar Panels are the most
efficient photovoltaic panels on the
market today.

More Power
Our panels produce more power in
the same amount of space—up to 50%
more than conventional designs and
100% more than thin film solar panels.

Reduced Installation Cost

More power per panel means fewer
panels per install. This saves both time
and money.

Reliable and Robust Design The SunPowerTM 305 Solar Panel provides today’s highest efficiency
Proven materials, tempered front glass,
and performance. Utilizing 96 back-contact solar cells, the SunPower
and a sturdy anodized frame allow
panel to operate reliably in multiple 305 delivers a total panel conversion efficiency of 18.7%. The panel’s
mounting configurations. reduced voltage-temperature coefficient and exceptional low-light
performance attributes provide outstanding energy delivery per peak
power watt.

SunPower’s High Efficiency Advantage - Up to Twice the Power

Thin Film Conventional SunPower

Peak Watts / Panel 65 215 305

Efficiency 9.0% 12.8% 18.7%

Peak Watts / ft2 (m2) 8 (90) 12 (128) 17 (187)

About SunPower

SunPower designs, manufactures and delivers high-performance

solar electric technology worldwide. Our high-efficiency solar cells
generate up to 50% more power than conventional solar cells.
Our high-performance solar panels, roof tiles and trackers deliver
significantly more energy than competing systems.

SPR-305-WHT-D
 305 SOLAR PANEL
EXCEPTIONAL EFFICIENCY AND PERFORMANCE

Electrical Data I-V Curve

Measured at Standard Test Conditions (STC): irradiance of 1000W/m², AM 1.5, and cell temperature 25° C

Peak Power (+/-5%) Pmax 305 W

1000 W/m² at 50° C
Rated Voltage Vmpp 54.7 V
1000 W/m²
Rated Current Impp 5.58 A

Current (A)
800 W/m²
Open Circuit Voltage Voc 64.2 V

Short Circuit Current Isc 5.96 A 500 W/m²

Maximum System Voltage UL 600 V

Temperature Coefficients 200 W/m²

Power -0.38% / K

Voltage (Voc) -176.6mV / K Voltage (V)

Current (Isc) 3.5mA / K Current/voltage characteristics with dependence on irradiance and module temperature.

NOCT 45° C +/-2° C

Tested Operating Conditions
Series Fuse Rating 15 A
Temperature - 40° F to +185° F (-40° C to + 85° C)
Mechanical Data 50 psf 245 kg/m2 (2400 Pa) front and back – e.g.
Max load
Solar Cells 96 SunPower all-back contact monocrystalline wind

Front Glass high transmission tempered glass Impact Resistance Hail 1 in (25 mm) at 52mph (23 m/s)
Junction Box IP-65 rated with 3 bypass diodes
Dimensions: 32 x 155 x 128 (mm) Warranties and Certifications
Output Cables 1000mm length cables / MultiContact (MC4) connectors Warranties 25 year limited power warranty
Anodized aluminum alloy type 6063
Frame 10 year limited product warranty
(silver); stacking pins
Weight 41 lbs. (18.6 kg) Certifications Tested to UL 1703. Class C Fire Rating

Dimensions

 Grounding Holes

 Stacking Pins












CAUTION: READ SAFETY AND INSTALLATION INSTRUCTIONS BEFORE USING THE PRODUCT.
Visit sunpowercorp.com for details
SUNPOWER and the SUNPOWER logo are trademarks or registered trademarks of SunPower Corporation. sunpowercorp.com
© 2009 March SunPower Corporation. All rights reserved. Specifications included in this datasheet are subject to change without notice.
Document #001-52287 Rev** / LTR_EN