Scribd
Upload
222 views

Design - Fish Market

The document provides design details for a two-way slab and piles for a fish market construction project, including load calculations, reinforcement requirements, and pile dimensions and specifications for different pile locations. Reinforcement sizing and spacing are specified to resist bending moments in short and long spans of the slab. Pile diameters, under-ream sizes, depths, capacities, and reinforcement sizes vary depending on the load requirements at different pile locations.

Uploaded by

D.V.Srinivasa Rao
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
222 views

Design - Fish Market

The document provides design details for a two-way slab and piles for a fish market construction project, including load calculations, reinforcement requirements, and pile dimensions and specifications for different pile locations. Reinforcement sizing and spacing are specified to resist bending moments in short and long spans of the slab. Pile diameters, under-ream sizes, depths, capacities, and reinforcement sizes vary depending on the load requirements at different pile locations.

Uploaded by

D.V.Srinivasa Rao
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 7

ANALAYSIS & DESIGN

Construction of Fish Market at Prathikollanka

Est.Cost.Rs.7.50 lakhs
DESIGN OF TWO WAY SLAB:-
Design Parametres:-
Unit weight of RCC =
Concrete mix :
Steel :
Cover to Reinforcement :
Characteristic compressive strength of concrete =
Yield strength of steel =
Item Slab panel Description
S2(Interior Panel)--One
short edge continuous

Length of slab panel ly in m 4.58


Width of slab panel lx in m 4.28
ly/lx 1.07
Overall depth required in mm 134
Width of slab panel considered 'b' in 1.00
'm'
Depth provided 'D' in 'm' 0.135
Dia.of bars assumed 8mm
Dead load in KN/sqm 3.375
Live load in KN/sqm 2.50
Floor finishes in KN/sqm 1.50
Total Load in KN/sqm 7.38
Short span(-) moment coefficient at 0.068
continuous edge
Short span(-) moment at continuous 9.19
edge
Short span(+) moment coefficient at 0.052
mid span
Short span(+) moment at mid span 7.03
Long span(-) moment coefficient at 0.037
continuous edge
Long span(-) moment at continuous 5.00
edge
Long span(+) moment coefficient at 0.043
mid span
Long span(+) moment at mid span 5.81
Design Moment Me1(-)ve in KN-m 13.78
Effective depth for balanced section 70.66
in 'mm'
Effective depth provided 'd' in 'mm' 106
Actual depth of neutral axis 'xu' in 19.57
'mm'
Maximum depth of neutral axis 'xumax' 50.88
in 'mm'
Area of steel required Ast in 'mm2' 390.33
Main Steel provided at continuous 8mm@125mm c/c
edge
Area of steel provided in mm2 401.92
Design Moment Me1(+)ve in KN-m 10.54
Effective depth for balanced section 61.79
in 'mm'
Actual depth of neutral axis 'xu' in 14.66
'mm'
Maximum depth of neutral axis 'xumax' 50.88
in 'mm'
Area of steel required Ast in 'mm2' 292.32
Main Steel provided at mid span 8mm@125mm c/c
Area of steel provided in mm2 401.92
Design Moment Me1(-)ve in KN-m(Long 7.50
span)
Effective depth for balanced section 52.12
in 'mm'
Actual depth of neutral axis 'xu' in 10.24
'mm'
Maximum depth of neutral axis 'xumax' 50.88
in 'mm'
Area of steel required Ast in 'mm2' 204.2
Dist. Steel provided at continuous 8mm@150mm c/c
edge
Area of steel provided in mm2 334.93
Dist.steel at mid span 8mm@150mm c/c
B:-

25KN/cum
M20
Fe415
25mm
20N/sqmm
415N/sqmm
nel Description
DESIGN OF PILES

Design Parametres:-

Concrete mix : M20


Steel : Fe415
Cover to Reinforcement : 40mm
Characteristic compressive strength of concrete = 20N/sqmm
Yield strength of steel = 415N/sqmm

Item Piles(1,5,4,8) Piles(2,3,6,7)

Load 'P' in KN 225.34 327.79


Dia.of pile proposed in 'mm' 300 375
No.of Under Reams proposed 2 2
Dia.of under reamed in 'm' 0.75 0.9375
Depth of the pile proposed in 'm' 3.5 3.75
Bearing capacity of the pile in KN 235.2 352.8
Main Reinforcement 4-12mm 5-12mm
Stirrups 6mm@200 c/c 8mm@300 c/c

(Note:-The above design is as per clauses 6.3, 6.3.1, 6.6 and 8.3.2.2 of IS 2911(PartIII)-1973)

Considering slab projections etc.,it is advisable to provide 375mm ɸ piles for corner columns also.

You might also like