Scribd
Upload
177 views1 page

Pos16 Mi Levibreton Kft360017a00 59771 en

The document discusses abrasive placement configurations for polishing plates used on different machine types, listing the maximum peripheral speed for each configuration which includes basic, inner and outer wheel, or just outer wheel placements. It notes the basic configuration allows half the plate to protrude for excellent edge finishing and other configurations can be used depending on material and abrasive type.

Uploaded by

Hossam Abdelhamed
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
177 views1 page

Pos16 Mi Levibreton Kft360017a00 59771 en

The document discusses abrasive placement configurations for polishing plates used on different machine types, listing the maximum peripheral speed for each configuration which includes basic, inner and outer wheel, or just outer wheel placements. It notes the basic configuration allows half the plate to protrude for excellent edge finishing and other configurations can be used depending on material and abrasive type.

Uploaded by

Hossam Abdelhamed
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

21.01.

2008

12 - ENCLOSURES p3-013a GB

ABRASIVE PLACEMENT ON POLISHING PLATES

TYPE POLISHING PLATE ABRASIVE MAX.PERIPHERAL NOTES


MACHINE Drawing Nº and plate diameter COMBINATION SPEED (m/sec)

ø 550 + ø 600
1. Base configuration 8,5 at 50 Hz
with 9 abrasives. 9,0 at 60 Hz
07dn005

ø 550 + ø 600

KFG
2.With 3 abrasives 8,5 at 50 Hz
KTG fitted on the outer 9,0 at 60 Hz
wheel and 3 fitted
on the inner wheel.
07dn007

ø 550 + ø 600

3. With 6 abrasives 8,5 at 50 Hz


fitted on the outer 9,0 at 60 Hz
wheel.
07dn006

The basic configuration enables approximately half of the plate to protrude from the edge
of the slabs to achieve an excellent peripheral finish. Depending on the type and width
of the machined material and the type of abrasive, 6 abrasives fitted on the outer wheel
and none on the inner wheel or 3 abrasives on the outer wheel and 3 on the inner wheel
can be used to polish.

THIS DOCUMENT IS PROPERTY OF AND IS PROTECTED BY COPYRIGHT. 12.5

You might also like