Scribd
Upload
109 views

2015-0075 1 5 KH Tann 3/20/2018 Dawson Deep Beam Formworks: 149b Selegie Road Singapore 188314

This document contains calculations for formwork beams used in a Dawson deep beam project. It provides details on the material properties, loading information, and design procedures. The calculations show the beam is designed to support a maximum load of 2.06 kNm with maximum shear forces of 3.3 kN. The section classification is Class 1 and the section is adequate to resist the bending and shear loads based on the resistances calculated.

Uploaded by

jasekan.dc
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
109 views

2015-0075 1 5 KH Tann 3/20/2018 Dawson Deep Beam Formworks: 149b Selegie Road Singapore 188314

This document contains calculations for formwork beams used in a Dawson deep beam project. It provides details on the material properties, loading information, and design procedures. The calculations show the beam is designed to support a maximum load of 2.06 kNm with maximum shear forces of 3.3 kN. The section classification is Class 1 and the section is adequate to resist the bending and shear loads based on the resistances calculated.

Uploaded by

jasekan.dc
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 6

Job No: 2015-0075

149b Selegie Road Singapore 188314 Sheet No: 1 of 5


Designed by: Checked by: KH TANN Date: 3/20/2018
Title: Dawson deep beam formworks

Calculations of SHS 25*25*2.3


1.0 Design Information
1.1 Material Information
gs = 78 kN/m³ , Density of Steel
Fy = 275 N/mm 2
, SteelGrade

1.2 Parameters
D = 25 mm ,max slab thickness
tp = 2.3 mm ,metal form thickness
r = 7.27 mm
1.3 Summary
design based on largest span of roof Sheet
1.4 Design Code
Design of formworks structure in accrodance with SS580
Using RHS 275
Allowable flexure stress = 275.00 N/mm2
Modulus of Elasticity = 210000 N/mm2

1.5 Loading Information


Dead Load
Selfweight of 2mm MS Plate = 0.94 kN/m steel plate
Selfweight of SHS = 0.01 kN/m
Imposed Load
H- Type Roof,
Normal maitenances only allowed
qk = 0.4 kN/m2
Load on the beam = 0.24 kN/m
Windload
Pressure on the external Roof (We) = -0.548 kN/m2
Pressure on internal Roof (Wi) = -0.686 kN/m2

Total Upward Pressure = -1.234 kN/m2

Load on beam = -0.7403 kN/M


Job No: 2015-0075

149b Selegie Road Singapore 188314 Sheet No: 2 of 5


Designed by: 0 Checked by: KH TANN Date: 3/20/2018
Title: Dawson deep beam formworks

2.0 Design Procedure


2.1 Load Combinations
LC LL DL WL
1 1.35 1.5 0
2 1.35 1.5 0.9
3 1.35 1.05 1.5
4 1.35 0 1.5
5 1 0 1.5
6 1.35 1.05 -1.5

2.2 Design Load values


LC1 = 1.8752
LC2 = 0.9688
LC3 = 0.4166
LC4 = 0.1646
LC5 = -0.166
LC6 = 2.6377
QED = 2.6377 Design load Value on the Beam

Maximum Load n the Middle = 2.06 kNm


Maximum Sheat forces = 3.30 kN
2.3 Section Classification
C/t = 9.87
72£ = 66.24

C/t ≤ 72£ Section Class 1

2.4 Resistanes of Bending


Mc,rd = Wpl*fy/1.15
= 365.9 kNm
MEd ≤ Mc,rd

2.5 Resisitances to Shear


Av = 70 mm2
Vpl,rd = 9.5 kN
but Ved = 3.3 kN

VEd ≤ Vpl,rd
Setion is Adiquate to Resist the Load
2015-0075

3/20/2018
2015-0075

3/20/2018

You might also like