Scribd
Upload
395 views

SNMP Configuration On MikroTik

This document discusses SNMP versions 1, 2, and 3 and their configuration on MikroTik routers. SNMP version 1 will be used with the PRTG program. SNMP version 3 requires changing the security to authorized and selecting authentication and encryption protocols like MD5 and DES along with passwords. SNMP version 2c is similar to version 1 but with minor security improvements.

Uploaded by

roberdj10
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
395 views

SNMP Configuration On MikroTik

This document discusses SNMP versions 1, 2, and 3 and their configuration on MikroTik routers. SNMP version 1 will be used with the PRTG program. SNMP version 3 requires changing the security to authorized and selecting authentication and encryption protocols like MD5 and DES along with passwords. SNMP version 2c is similar to version 1 but with minor security improvements.

Uploaded by

roberdj10
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 9

SNMP V1,2 and 3 with

MikroTik Routers
By : Haydar Fadel
SNMP Setup
SNMP Setup
SNMP Version 1

PRTG Program will be used


SNMP Version 1

PRTG Program will be used


SNMP v3

To configure SNMPv3 all you need change the


following :
1. Change security from None to authorized.
2. Authentication protocol will be MD5
(Default) or SHA1
3. 3. encryption protocol will be DES (Default)
or AES.
4. Authentication password ………………
5. Encryption password ………………

Note : SNMPv2c is the same SNMPv1 but with


small security enhancements
SNMP v3
SNMP v3
The END

You might also like