Scribd
Upload
681 views

Chapter-3 Lec - 8 Practice Questions

1. The document provides 13 practice questions about logic gates. It includes questions about drawing output waveforms for 2, 3, and 4 input AND and OR gates given input waveforms. It also includes questions about the relationships between NAND/negative-OR and NOR/negative-AND gates. 2. The final question asks how an exclusive-OR gate differs from a regular OR gate in its logical operation.

Uploaded by

syed02
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
681 views

Chapter-3 Lec - 8 Practice Questions

1. The document provides 13 practice questions about logic gates. It includes questions about drawing output waveforms for 2, 3, and 4 input AND and OR gates given input waveforms. It also includes questions about the relationships between NAND/negative-OR and NOR/negative-AND gates. 2. The final question asks how an exclusive-OR gate differs from a regular OR gate in its logical operation.

Uploaded by

syed02
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Chapter-3 (Practice Questions Lecture-8)

1. Write the expression for a 4-input OR gate with inputs A, B, C, D, and output X.
2. Determine the output, X, for a 2-input AND gate with the input waveforms shown in Figure-1.
Show the proper relationship of output to inputs with a timing diagram. Repeat for 2 input OR
gate.

Fig-1
3. The waveforms in Figure-2 are applied to points A and B of a 2-input AND gate followed by an
inverter. Draw the output waveform.

Fig-2
4. Considering (Figure -2) A and B as two inputs, draw the output for 2 input OR gate, NOR gate ,
NAND gate, Exclusive OR , and Exclusive NOR.
5. The input waveforms applied to a 3-input AND gate are as indicated in Figure 3. Show the
output waveform in proper relation to the inputs with a timing diagram. Repeat for 3 input OR
gate

Fig-3
6. The input waveforms applied to a 4-input AND gate are as indicated in Figure 4. The output of
the AND gate is fed to an inverter. Draw the net output waveform of this system. Repeat for 4
input OR gate.

Fig-4
7. For the waveforms given in Figure 5, A and B are ANDed with output F, D and E are ANDed
with output G, and C, F, and G are ORed. Draw the net output waveform.

Fig-5
8. Show the truth table for a system of a 3-input OR gate followed by an inverter. For the set of
input waveforms in Figure 6, determine the output for the gate shown and draw the timing
diagram.

Fig-6

9. Determine the gate output for the input waveforms in Figure 7 and draw the timing diagram.

Fig-7

10. As you have learned, the two logic symbols shown in Figure 8 represent equivalent operations.
The difference between the two is strictly from a functional viewpoint. For the NAND symbol,
look for two HIGHs on the inputs to give a LOW output. For the negative-OR, look for at least
one LOW on the inputs to give a HIGH on the output. Using these two functional viewpoints,
show that each gate will produce the same output for the given inputs.

Fig-8

11. Determine the output waveform in Figure 9 and draw the timing diagram.

Fig-9

12. The NAND and the negative-OR symbols represent equivalent operations, but they are
functionally different. For the NOR symbol, look for at least one HIGH on the inputs to give a
LOW on the output. For the negative-AND, look for two LOWs on the inputs to give a HIGH
output. Using these two functional points of view, show that both gates in Figure 3–88 will
produce the same output for the given inputs.

Fig-10

13. How does an exclusive-OR gate differ from an OR gate in its logical operation?

You might also like