Scribd
Upload
360 views2 pages

Sensores Sender

The document provides information on pressure senders including models, dimensions, resistance values, and how to order. It describes several pressure sender models for different pressure ranges and connection types. Resistance values at different pressures are given in a table. The ordering section lists part numbers and describes the available pressure ranges for each model.

Uploaded by

Willy Alexander Ramirez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
360 views2 pages

Sensores Sender

The document provides information on pressure senders including models, dimensions, resistance values, and how to order. It describes several pressure sender models for different pressure ranges and connection types. Resistance values at different pressures are given in a table. The ordering section lists part numbers and describes the available pressure ranges for each model.

Uploaded by

Willy Alexander Ramirez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

sect.

70 1411607
rev. 2014/12/08

Pressure Senders
These Gage Pressure Senders are designed to be
used in conjunction with our EG Series Swichgage
Instruments as well as CAN I/O modules. See
the bulletin 95090 EG Series – Electric Gage and
Swichgage Instrument for more information.

NOTE: Always provide proper circuit protection with


fuses or circuit breakers.

Model ESP Series


1.81 in.
[46 mm]

1.98 in. [50 mm] 1.61 in. [41 mm]

#10-32
1/8-27 NPTF .55 in [14 mm] HEX.

Model ES2P Series

1.81 in.
[46 mm]

1.98 in. [50 mm] 1.61 in. [41 mm]

#10-32
1/8-27 NPTF .55 in [14 mm] HEX.

Model ESDP Series

1.81 in.
[46 mm]

1.98 in. [50 mm] 1.61 in. [41 mm]

#10-32
1/8-27 NPTF .55 in [14 mm] HEX.

In order to consistently bring you the highest quality, full-featured products, we reserve the right to change our specifications and designs at any time. MURPHY products and the Murphy
logo are registered and/or common law trademarks of Enovations Controls, LLC. This document, including textual matter and illustrations, is copyright protected by Enovation Controls, LLC,
with all rights reserved. (c) 2014 Enovation COntrols, LLC. A copy of the warrant may be viewed or printed by going to http://fwmurphy.com/warranty.
Model ESPM and ESPMK Series

2.47 in. [63 mm]


2.25 in.
1.86 in. [47 mm] [57 mm]
1.65 in. [42 mm]
1/8-27 NPT

2.03 in.
[52 mm]

1/2 in. SQUARE WRENCH


[13 mm] FLATS

Resistance Values
ESP-80, ES2P-80 Senders: ESPM-300, ES2PM-300 Senders:
0 PSI = 240 ohms (falling pressure) 0 PSI = 240 ohms (falling pressure)
20 PSI = 153 ohms (falling pressure) (primary calibration point) 75 PSI = 153 ohms (falling pressure) (primary calibration point)
40 PSI around 100 ohms (falling pressure) 150 PSI around 100 ohms (falling pressure)
60 PSI = 67 ohms (falling pressure) (secondary calibration point) 225 PSI = 67 ohms (falling pressure) (secondary calibration point)
80 PSI = 33 ohms (rising pressure) 300 PSI = 33 ohms (rising pressure)
ESP-100, ES2P-100 Senders: ESPMK-400, ES2PMK-400 Senders:
0 PSI = 240 ohms (falling pressure) 0 PSI = 240 ohms (falling pressure)
25 PSI = 153 ohms (falling pressure) (primary calibration point) 100 PSI = 153 ohms (falling pressure) (primary calibration point)
50 PSI around 100 ohms (falling pressure) 200 PSI around 100 ohms (falling pressure)
75 PSI = 67 ohms (falling pressure) (secondary calibration point) 300 PSI = 67 ohms (falling pressure) (secondary calibration point)
100 PSI = 33 ohms (rising pressure) 400 PSI = 33 ohms (rising pressure)
ESPM-200, ES2PM-200 Senders:
0 PSI = 240 ohms (falling pressure)
50 PSI = 153 ohms (falling pressure) (primary calibration point)
100 PSI around 100 ohms (falling pressure)
150 PSI = 67 ohms (falling pressure) (secondary calibration point)
200 PSI = 33 ohms (rising pressure)

Resistance Table for Pressure Sender


The voltage generated when excited by a 10mA DC constant current

PSI 0 10 20 30 40 50 60 70 80 90 100
R(Ohm) 240 205 171 143 123 103 88 74 60 47 33
V (mV) 2.40V 2.05V 1.71V 1.43V 1.23V 1.03V (880) (740) (600) (470) (330)

How to Order

Part Number Model and Description Notes: Available Ranges


05701860 ESP-80: 1-wire-to-ground Pressure sender
0-80 psi (0-500 kPa)
05701867 ES2P-80: 2-wire ungrounded Pressure sender
05701857 ESP-100: 1-wire-to-ground Pressure sender
05701858 ES2P-100: 2-wire ungrounded Pressure sender 0-100 psi (0-700 kPa)
05701859 ESDP-100: Dual Gage, 2-wire ungrounded Pressure sender
05701753 ESPM-200: 1-wire-to-ground Pressure sender †
0-200 psi (0-1380 kPa)
05701748 ES2PM-200: 2-wire ungrounded Pressure sender †
05701751 ESPM-300: 1-wire-to-ground Pressure sender †
0-300 psi (0-2070 kPa)
05701750 ES2PM-300: 2-wire ungrounded Pressure sender †
05702566 ESPMK-400: 1-wire-to-ground Pressure sender †
0-400 psi (0-2760 kPa)
05702565 ES2PMK-400: 2-wire ungrounded Pressure sender †

† Mounting off-equipment recommended.


NOTE: The ESPMK-400 & ES2PMK-400 are not recommended for use with digital I/O modules – use PXT-K
pressure transmitter.

You might also like