Scribd
Upload
182 views2 pages

Screw Screw Screw Screw Pump Pump Pump Pump

This document is a technical bid evaluation form for a screw pump. It contains over 100 line items requesting technical specifications and performance data from vendors on topics like: the pump type and model, site data, fluid properties, operating conditions, materials, testing, spare parts, and vendor commitments. The level of detail requested indicates this is for a procurement project where the customer is seeking competitive bids from qualified pump suppliers.

Uploaded by

victorvikram
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
182 views2 pages

Screw Screw Screw Screw Pump Pump Pump Pump

This document is a technical bid evaluation form for a screw pump. It contains over 100 line items requesting technical specifications and performance data from vendors on topics like: the pump type and model, site data, fluid properties, operating conditions, materials, testing, spare parts, and vendor commitments. The level of detail requested indicates this is for a procurement project where the customer is seeking competitive bids from qualified pump suppliers.

Uploaded by

victorvikram
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Job No. Doc. No. 12345 Rev.

A
SCREW PUMP Customer
Location XX XX XX 1 of 2
Item
TECHNICAL BID EVALUATION (TBE)
Service Prd. Chk. App. Sheet

Vendor :
Description Units Required Data Bid: Remarks
Date:

1. REFERENCE DOCUMENTS
2.
3. TYPE
4. MODEL
5.
6. SITE DATA
7.
8. ELECTRIC AREA CLASSIFICATION
9.
ATEX / CE Marking
10. EC DECLARATION
Machinery Directive 2006/42/EC
11.
12.
13. FLUID DATA
14. TYPE OR NAME OF LIQUID
15. PUMPING TEMPERATURE (NORM/MIN/MAX) °C
16. VISCOSITY (NORM/MIN/MAX) cP
17.
18. OPERATING CONDITIONS
19. CAPACITY m3/h
20. SUCTION PRESSURE kg/cm2g
21. DISCHARGE PRESSURE kg/cm2g
22. DIFFERENTIAL PRESSURE kg/cm2
23.
24. PERFORMANCE
25. RATED CAPACITY m3/h
26. NPSH REQUIRED m
27. RATED SPEED rpm
28. VOLUMETRIC EFFICIENCY %
29. MECHANICAL EFFICIENCY %
30. kW AT MAXIMUM VISCOSITY kW
31. kW AT RELIEF VALVE SETTING kW
32.
33. MECHANICAL DESIGN CONDITIONS
CONDITIONS Static conditions, not in operation
34. DESIGN PRESSURE kg/cm2g
35. DESIGN TEMPERATURE (MIN/MAX) °C
36.
37. CONSTRUCTION
38. CASING:
39. MAXIMUM ALLOWABLE PRESSURE kg/cm2g MAWP ≥ PSV set
40. HYDROSTATIC TEST PRESSURE kg/cm2g
41.
42. CASING CONNECTION:
43. FLANGES As per ASME B16.5
44. SURFACE ROUGHNESS 125 AARH
45. RATING 300#
46.
47. SHAFT SEAL:
48. TYPE
49. MANUFACTURER
50. MODEL
51.
52. BEARING:
53. TYPE
54. MANUFACTURER
55. MODEL
56.
57. LUBRICATION TYPE
58. LUBRICANT TYPE
Job No. Doc. No. 12345 Rev. A
SCREW PUMP Customer
Location XX XX XX 2 of 2
Item
TECHNICAL BID EVALUATION (TBE)
Service Prd. Chk. App. Sheet

Vendor :
Description Units Required Data Bid: Remarks
Date:

59. MATERIALS Mfr. Std. for the specified operating conditions


60. CASING
61. END PLATES
62. ROTOR(S)
63. SHAFT
64. SLEEVE
65. BEARING HOUSING
66.
67. MATERIAL CERTIFICATION
68. PRESSURE RETAINING PARTS EN 10204 Type 3.1
69. LIFTING LUGS, CASING BOLTS, ETC. EN 10204 Type 3.1
70. NON-PRESSURE PARTS EN 10204 Type 2.1
71.
72. COUPLING
73. MANUFACTURER
74. TYPE Flexible type
75. SPACER LENGTH mm
76. SERVICE FACTOR
77. LIMITED END FLOAT Required, since the drivers have no thrust bearing
78.
79. COUPLING GUARD Non-sparking type
80. MATERIAL
81.
Common steel baseplate for driven and driver equipments shall
82. BASEPLATE
be suitable for the installation on steel structure.
83.
84. PAINTING
AINTING As per Vendor’s standard
85. PUMP RAL 6011 (green)
86. COUPLING GUARD RAL 2004 (orange)
87. BASE PLATE RAL 7004 (grey)
88.
89. NAMEPLATE
90.
91. WELDING
92.
93. TESTING
94. CASING HYDRAULIC TEST
95. PERF. AND MECHANICAL RUNNING TEST
96. NPSH TEST
97. SOUND LEVEL TESTING
98. RADIOGRAPHY
99. ULTRASUONIC INSPECTION
100. MAGNETIC PARTICLE INSPECTION
101. LIQUID PENETRANT INSPECTION
102.
Included in Vendor Scope of Supply.
103. COMMISSIONING AND START
START UP SPARES Vendor shall indicate which parts are recommended for
commissioning and start-up
104.
Vendor shall indicate which parts are recommended for for two
105. OPTIONAL SPARE PARTS FOR 2 YEARS
(2) years operation
106.
107. CAPITAL SPARE PARTS Not required
108.
109. VENDOR DATA COMMITMENT
COMMITMENT As per doc. No. XXX sheet Y
110.
111.
112.

You might also like