Scribd
Upload
46 views

Examples

After amplitude modulation, the modulated signal will contain the carrier frequency and additional frequencies representing the sum and difference of the carrier and modulating signals. When passed through an SSB filter, only the upper or lower sideband is transmitted. At the receiver, mixing with a local oscillator reconstructs the original modulating signal frequencies from the sideband.

Uploaded by

Srinivas Share
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
46 views

Examples

After amplitude modulation, the modulated signal will contain the carrier frequency and additional frequencies representing the sum and difference of the carrier and modulating signals. When passed through an SSB filter, only the upper or lower sideband is transmitted. At the receiver, mixing with a local oscillator reconstructs the original modulating signal frequencies from the sideband.

Uploaded by

Srinivas Share
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Solution:

a)
After amplitude modulation, the modulated signal will contain the following
frequency components.
fC = 100KHz
fC+fm1 = 100k + 100 = 100.1kHz
fC -fm1 = 100k - 100 = 99.9kHz
fC+fm2 = 100k + 200 = 100.2kHz
fC -fm2 = 100k - 200 = 99.8kHz
fC+fm3 = 100k + 400 = 100.4kHz
fC -fm3 = 100k - 400 = 99.6kHz

After passing through SSB filter, the transmitted signal frequencies will be
100.1k, 100.2k and 100.4k
At the receiver when mixed with local oscillator, the output will be
100.1k˜100.02k = 80Hz
100.2˜100.02k =180Hz
100.4˜100.02k =380Hz

After passing through SSB filter to remove the upper sideband, the
transmitted signal frequencies will be
99k, 98k and 96k
At the receiver when mixed with local oscillator, the output will be
99k˜100.02k = 1.02kHz
98k˜100.02k =2.02kHz
96k˜100.02k =4.02kHz

You might also like