Scribd
Upload
160 views2 pages

Atig Pac 315iii

The document describes an ATIG-PAC-315III welding power source that offers digital inverter AC/DC pulse TIG welding capabilities. It has features such as HF soft switch technology, four different AC TIG waveforms, MCU+DSP control, simple preset parameters, four operating modes, and the ability to store 30 user parameters. It is recommended for welding mild steel, copper, titanium, aluminum and alloys and is suitable for applications such as bicycle production, maintenance, shipbuilding and pipelines. The power source has a rated input power of 13.4 KVA and can output welding currents from 5-315 amps and voltages from 10.2-22.6 volts for DC TIG and pulse T

Uploaded by

haris
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
160 views2 pages

Atig Pac 315iii

The document describes an ATIG-PAC-315III welding power source that offers digital inverter AC/DC pulse TIG welding capabilities. It has features such as HF soft switch technology, four different AC TIG waveforms, MCU+DSP control, simple preset parameters, four operating modes, and the ability to store 30 user parameters. It is recommended for welding mild steel, copper, titanium, aluminum and alloys and is suitable for applications such as bicycle production, maintenance, shipbuilding and pipelines. The power source has a rated input power of 13.4 KVA and can output welding currents from 5-315 amps and voltages from 10.2-22.6 volts for DC TIG and pulse T

Uploaded by

haris
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

ATIG-PAC-315III…Completely Digital Inverter AC/DC Pulse TIG

ATIG-PAC-315 /500 /630


AC /DC /CC 3 Phase industrial
Process: MMA/DC TIG/Pulse TIG/ AC TIG/ AC Pulse TIG/Mixture AC TIG

Features and benefits:

●HF soft switch transform, high efficiency, small size,


light weight.
●AC TIG cam provide four different output
waveforms: standard square wave, irregular square
wave, triangle wave, Sine wave.
●MCU+DSP controlled welding process, accurate
control.
●Knob-control preset of all parameters and welding
state, simple and convenient.
● Four operating mode: 2 step / 4 step / spot weld /
repeat, to adapt the different applications.
●Excellent weld seam quality can be achieved due to
its effect on all important areas of the weld.
●Capable for storing 30 sets of user-defined
parameters and easily recall all the parameters.
●Easy to arc-starting, stable arc, wonderful welding
performance less noise.

Recommended base metals: Standard equipments:


● Mild steel ● 1 Power source
● Copper ● 1 Connected primary cable L=3m
● Titanium ● 1 Welding cable L=3m with electrode holder and
● Aluminum quick plug
● Al-Mg Alloy ● 1 Ground cable L=3m with clamp and quick plug
● 1 TIG torch
Recommended areas of use:
● Bicycle, fitness equipment, stainless furniture
● Maintenance and repair
● Industry plant construction
● Containers manufacture
● Shipbuilding
● Pipeline industry

www.aotaiwelding.com
：
Power source technical data：

Rated input voltage (V) V Three phase 380/50Hz


Rated input power (KVA) KVA 13.4
Rated input current (A) A 14.4
Rated duty cycle % 60
Range of welding current A 5～315
DC TIG
Rang of welding voltage V 10.2～22.6
Peak current A 5～315
Pulse TIG
Base current A 5～315
AC frequency Hz 40～250
Clean ratio - -40～+40（15%～85%）
Square A 5～315
Irregular square A 5～315
Welding
Sine wave A 5～315
AC current
Triangle wave A 5～315
Square V 10.2～22.6
Welding Irregular square V 10.2～22.6
voltage Sine wave V 10.2～22.6
TIG
Triangle wave V 10.2～22.6
Frequency Hz 0.5～10
Mixture AC
Ratio % 15%～85%
Pulse ratio % 15%～85%
Pulse frequency Hz 0.2Hz～999Hz
Arc-starting current A 5～315
Crater-filling current A 5～315
Up-slope time S OFF～10.0
Down-slope time S OFF～15.0
Pre-gas time S OFF～10.0
Post-gas time S OFF～60.0
Spot weld time S OFF～2.0
Diameter of tungsten electrode mm 0.8～6.0
Range of welding current A 5～315
Arc force A 50～200
MMA
Knee-point voltage V 15～30
Arc-starting time S 0.1～2.0
（W×
Dimension（ ×D×
×H）
） mm 670×320×600
Wight Kg 54

www.aotaiwelding.com

You might also like