Scribd
Upload
177 views2 pages

Telpro Ribbon Anodes Data Sheet: Manufacturers of Mmo and Platinized Titanium Electrodes

TELPRO manufactures mixed metal oxide (MMO) coated titanium ribbon anodes for cathodic protection applications. The MMO coating consists of irridium dioxide and tantalum pentoxide and has been proven equivalent or superior to other MMO coatings in accelerated life testing. TELPRO follows strict quality control procedures throughout manufacturing to ensure high quality products. The ribbon anodes have a design life of over 50 years when operated at a specified current density and over 100 years when used in concrete.

Uploaded by

m_michael_c
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
177 views2 pages

Telpro Ribbon Anodes Data Sheet: Manufacturers of Mmo and Platinized Titanium Electrodes

TELPRO manufactures mixed metal oxide (MMO) coated titanium ribbon anodes for cathodic protection applications. The MMO coating consists of irridium dioxide and tantalum pentoxide and has been proven equivalent or superior to other MMO coatings in accelerated life testing. TELPRO follows strict quality control procedures throughout manufacturing to ensure high quality products. The ribbon anodes have a design life of over 50 years when operated at a specified current density and over 100 years when used in concrete.

Uploaded by

m_michael_c
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

MANUFACTURERS OF MMO AND

PLATINIZED TITANIUM ELECTRODES

TELPRO RIBBON ANODES DATA SHEET


Titanium Electrode Products Companies, “TELPRO,” are
manufacturers of mixed metal oxide anodes for cathodic
protection.

TELPRO Ribbon Anodes are manufactured using solid


titanium, which meets ASTM B265 Grade 1 or Grade 2
standards, which has been coated with TELPRO Mixed
Metal Oxide coating.

TELPRO MMO coating consists of IrO2/Ta2O5 and is


suitable for use in all cathodic protection applications.
Because mixed metal oxide anodes have an extremely
low consumption rate, the titanium substrate remains
constant throughout the design life of the anode.
APPLICATIONS
ABOVE GROUND STORAGE TANK BASES Based upon accelerated life testing, conducted by an
STEEL REBAR IN CONCRETE independent laboratory, TELPRO MMO coating has been
LINEAR FLEX ANODE FOR INPLANT PIPEWORK proven to be equivalent or superior to other mixed metal
oxide coatings which are currently being used; a copy of
this test report is available upon request.

Strict quality control procedures are followed throughout the entire coating process, to guarantee proper coating
adhesion and loading. Also, TELPRO products are tested using an X-Ray Fluorescence Spectrometer, to ensure
production of the highest quality product, which is fundamental in every step of the manufacturing process.

MMO RIBBON ANODE SPECIFICATIONS

COATING : IRIDIUM BASED MIXED METAL OXIDE


SUBSTRATE : TITANIUM ASTM B265 Gr1
NOMINAL DIMENSIONS: 0.25" (6.35mm) Wide X 0.025" (0.635mm) Thick
COIL LENGTH : 328ft (100m)
COIL WEIGHT : 3.5 lbs (1.6 Kgs)
SURFACE AREA : 0.014m2/m
RESISTANCE : 0.042 ohms/ft

USA OFFICE : PHONE 281 498 4727 FAX 281 498 4728 TOLL FREE 877 483 5776
UK OFFICE : PHONE 44 1453 845 718 FAX 44 1453 845 719
WEB : WWW.TELPROCOMPANIES.COM
EMAIL : [email protected] / [email protected] / [email protected]
MANUFACTURERS OF MMO AND
PLATINIZED TITANIUM ELECTRODES

TELPRO RIBBON ANODES DATA SHEET


CURRENT OUTPUT OF RIBBON IN FINE SAND
12.8mA/ft (42mA/m) When operating at an anode current density of 0.278A/ft2 (3A/m2)
DESIGN LIFE
50 years plus when operating at an anode current density of 0.278A/ft2 (3A/m2)
Lifetimes stated are nominal, we can supply Amps / life different to stated standards on request.
CURRENT OUTPUT OF RIBBON IN CONCRETE
0.45mA/ft (1.5mA/m) when operating at an anode current density of 10.19mA/ft2 (100A/m2)
DESIGN LIFE
100 years plus when operating at an anode current density of 10.19mA/ft2 (100A/m2)
Lifetimes stated are nominal, we can supply Amps / life different to stated standards on request.
NOMINAL DIMENSIONS OF TITANIUM CONDUCTOR BAR
MATERIAL : TITANIUM ASTM B265 Gr1
DIMENSIONS : 0.50" (12.7mm) Wide x 0.035" (0.9mm) Thick
COIL LENGTH : 328ft (100m)
COIL WEIGHT : 11 lbs (5kgs)

TYPICAL APPLICATIONS FOR RIBBON ANODES


MMO/Ti
RIBBON

Ti BAR

SPOT WELD CONNECTION


OF MMO RIBBON TO
TITANIUM BAR

UNDERTANK GRID SYSTEM LAYOUT – MMO/Ti RIBBON / Ti CONDUCTOR BAR


POWER FEED CONNECTOR
FOR EXTERNAL BASE PLATE PROTECTION.
Ti WIRE FILLET WELDED TO
· RELIABLE A CONDUCTOR BAR
· ECONOMICAL
· EASY TO INSTALL CABLE CRIMPED AND
· EXTENSIVE WORLDWIDE TRACK RECORD ENCAPSULATED

You might also like