Scribd
Upload
109 views

Installation Guide

This document provides a 15 step installation guide for a biometric attendance system. It outlines unzipping files, checking operating system compatibility, running setup files, installing drivers, activating the device online, selecting domain and location settings, and restarting the client to begin taking attendance. Contact support via email or phone is provided for assistance.

Uploaded by

D V BHASKAR
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
109 views

Installation Guide

This document provides a 15 step installation guide for a biometric attendance system. It outlines unzipping files, checking operating system compatibility, running setup files, installing drivers, activating the device online, selecting domain and location settings, and restarting the client to begin taking attendance. Contact support via email or phone is provided for assistance.

Uploaded by

D V BHASKAR
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

INSTALLATION GUIDE

1. Unzip the BAS_setup_v1.5.zip file to a location on your PC.

2. Please check your Operating System compatibility. (right click on


My Computer icon then click on properties)

3. Open the folder where the contents of the file has been unzipped,
Double click on the BASSetup3.5.exe/ BASSetup4.0.exe (as per
.net framework).
4. Select the Operating System and the Window 32/64 bit for and hit
the Next button

5. The installation will complete and will reboot your computer

6. Go to C:\ drive and locate the folder FingerprintSensors


7. Inside the FingerprintSensors folder locate the Drivers folder and
install the device driver for the device to be used on the system for
the OS architecture 32/64 bit

8. Log on to the Attendance Portal and generate the device activation


code. To activate a device please ensure the following are added
on the portal:
a. Office Location b. Biometric Admin c. Device Location

9. Please Step 1. To Step 8 is successfully completed.


10. Connect your biometric fingerprint/Iris device to your computer
and then double click on the BAS icon on the desktop to launch the
application.

11. The application will open and launch the domain selection
window.

12. Select the domain and application name for which the application
has to be configured, if you are unsure of the domain please get in
touch with the nodal officer/technical co-ordinator.

13. After the domain is selected the application will ask for Activation
code. Enter the Device Activation code and press the Submit
button, upon validation of the code, it will ask you to select a Entry
Point/Device Location ( location where the device will be installed)
14. After Selecting the Entry Point hit the verify button and provide
your biometric for authentication. Only successful authentication will
activate the client.
15. After the client is authorized restart the client and you can use for
marking your attendance.

For support please e-mail : [email protected]

Or you may call: 011-24305050

You might also like