Scribd
Upload
244 views

Lab4 - Packet Tracer

This document outlines a lab activity to build a small computer network with PCs and a switch using Cisco Packet Tracer. The objectives are to practice router and PC configuration. Students will construct a network topology connecting 4 PCs with IP addresses to a switch, configure the PCs and switch with the given IP addresses, and verify connectivity between the PCs using the ping command. Upon completion, students will be able to build a small network topology with PCs and a switch using Packet Tracer.

Uploaded by

Nikita Lohar
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
244 views

Lab4 - Packet Tracer

This document outlines a lab activity to build a small computer network with PCs and a switch using Cisco Packet Tracer. The objectives are to practice router and PC configuration. Students will construct a network topology connecting 4 PCs with IP addresses to a switch, configure the PCs and switch with the given IP addresses, and verify connectivity between the PCs using the ping command. Upon completion, students will be able to build a small network topology with PCs and a switch using Packet Tracer.

Uploaded by

Nikita Lohar
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 3

GOVERNMENT POLYTECHNIC, BHUJ

COMPUTER DEPARTMENT

Lab 2.1:- Develop a small network with PCs and Switch using packet tracer.

Objectives:
The objective of this lab is to build small network topology with PCs and switch using CISCO Packet
Tracer. The students will have practice to router configuration and PC configuration.

Outline of this lab:


1. Building small network topology using Packet Tracer.
2. Verifying the connectivity between the PCs
3. Assignment: Building a network topology with PCs and switch

Activity Outcomes
At the end of this lab the student will be able to
Build a small network topology with PCs and switch using the packet tracer

Lab Tasks
 IP addresses:
Device Interface IP address Subnet mask Gateway
PC1 NIC 192.168.10.2 255.255.255.0 192.168.10.1
PC2 NIC 192.168.10.3 255.255.255.0 192.168.10.1
PC3 NIC 192.168.10.4 255.255.255.0 192.168.10.1
PC4 NIC 192.168.10.5 255.255.255.0 192.168.10.1

 Build a small network topology with PCs and Switch.

Network Management and Administration (3360703) Page 1


GOVERNMENT POLYTECHNIC, BHUJ

COMPUTER DEPARTMENT

Network Management and Administration (3360703) Page 2


GOVERNMENT POLYTECHNIC, BHUJ

COMPUTER DEPARTMENT

 Configure PCs and Switch:


Configure the PCs with IP addresses.
1. To do this, Click on the PC and click on Desktop Tab. In that click on IP configuration. In
that window, type the IP address, the subnet mask and the gateway address.
2. Repeat this step for all PCs.
3. Verify the IP addresses are assigned correctly or not using the command ipconfig in the
command window.

 Verify the connectivity:


Using ping command, verify the connectivity between two networks.

From PC1, enter the command


ping 192.168.10.3
If you get replies from the other PC then the connections are correct. If not you may need
to check the connections and configurations.

Network Management and Administration (3360703) Page 3

You might also like