0% found this document useful (0 votes)
1K views22 pages

3500 Family: Tool List

This document lists tools needed for engine repair on 3500 family engines. It provides the tool name, description of use, and recommended dealer status for each tool grouped by engine component like cylinder block, pistons, crankshaft etc. The document contains detailed information about tools for different 3500 engine models.

Uploaded by

cacurio557890
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
1K views22 pages

3500 Family: Tool List

This document lists tools needed for engine repair on 3500 family engines. It provides the tool name, description of use, and recommended dealer status for each tool grouped by engine component like cylinder block, pistons, crankshaft etc. The document contains detailed information about tools for different 3500 engine models.

Uploaded by

cacurio557890
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 22

3500 Family

Tool List
Caterpillar Service Tools Division November 2003

BASIC TOOL
GROUPS 4C-3502 Engine Repair Indicator Kit
Used to check general engine condition
Engines: All engines
• See T&SPG (NENG2500) for content of tool group

CAT Dealer Recommended

CYLINDER
BLOCK & 5P-4175 Counterboring Tool
LINER
Reconditions cylinder block liner counterbores
Engines: All 3300, 3400 Diesel & 3500 Diesel

CAT Dealer Recommended

8T-0455 Tool Gp. - Liner Projection


Measures cylinder liner projection and counterbore depth
Engines: C-9, All 3300, 3176/96, C-10/12, C11/C13 All 3400, C-15/16, C15, All 3500

CAT Dealer Required

2P-8260 Installer Gp. - Cylinder Liner


Pushes cylinder liner into cylinder block
Engines: C-9, All 3300, 3176/96, C-10/12, C11/C13, All 3400, C-15/16, C15, All 3500

CAT Dealer Required

FT1543 Plate
Used to install cylinder liners into cylinder block
Engines: All 3500
• Used with 2P-8260 Cylinder Liner Installer Gp. (replaces 2P-8257 Plate)

CAT Dealer Required

1U-6319 Socket
Used with cylinder pack puller to allow use of impact gun
Engines: All 3300, 3176/96, C-10/12, C11/ C13, All 3400, C15, C-15/16, All 3500

CAT Dealer Required

5P-8665 Puller - Cylinder Liner


Removes cylinder liner from cylinder block
Engines: All 3300, 3176/96, C-10/12, C11, C13, All 3400, C-15/16, C15, All 3500

CAT Dealer Required

Caterpillar: Confidential Green Page 1 of 22


Last Modified: 10/24/2003
3500 Family - Tool List
CYLINDER
BLOCK & 8T-2686 Puller - Cylinder Liner
LINER
Used to remove & install cylinder pack (rubber plug type, 170 mm bore)
Engines: All 3500
• Requires FT1970 Bridge

CAT Dealer Required

FT1970 Bridge
Used to remove cylinder liner
Engines: All 3500
• Used with 8T-2686 Cylinder Liner Puller

CAT Dealer Required

PISTON,
RINGS & 1U-7616 Compressor Gp. - Ring
CONNECTING
Compresses piston rings for installation into cylinder bore
ROD Engines: All 3500

CAT Dealer Required

6V-4020 Expander Gp. - Ring


Removes and installs piston rings
Engines: All 3500

CAT Dealer Required

9U-7360 Gauge Gp - Ring Groove


Checks piston compression ring groove for piston reusability
Engines: 3500 (except 3524B)

CAT Dealer Recommended

4C-8725 Adapter
Used to remove and install connecting rod pin bearing
Engines: 3500 (with 10 degree connecting rod)
• Used with 5P-8639 Press Gp.

CAT Dealer Required

4C-8726 Spacer
Used to remove and install connecting rod pin bearing
Engines: 3500 (with 10 degree connecting rod)
• Used with 5P-8639 Press Gp.

CAT Dealer Required

4C-8727 Adapter
Used to remove and install connecting rod pin bearing
Engines: 3500 (with 10 degree connecting rod)
• Used with 5P-8639 Press Gp.

CAT Dealer Required

Caterpillar: Confidential Green Page 2 of 22


Last Modified: 10/24/2003
3500 Family - Tool List
PISTON,
RINGS & 5P-8639 Press Gp.
CONNECTING
Used to remove and install connecting rod pin bearings
ROD Engines: All engines (except 3000 & 3600)
• Requires hydraulic tools and engine specific tooling - see T&SPG for details
• Reference: SMHS7295 Special Instruction

CAT Dealer Required

5P-8649 Adapter - Pin Bushing


Used to remove and install connecting rod pin bearings
Engines: 3176/96, C-10/12, 3400, 3500 (with 6 degree connecting rod)
• Used with 5P-8639 Press Gp.

CAT Dealer Required

6V-3042 Adapter - Push


Used to remove and install connecting rod pin bearing
Engines: 3500 (with 6 degree connecting rod)
• Used with 5P-8639 Press Gp.

CAT Dealer Required

6V-3043 Spacer
Used to remove and install connecting rod pin bearings
Engines: 3500 (with 6 degree connecting rod)
• Used with 5P-8639 Press Gp.

CAT Dealer Required

136-1452 Pliers As. - Internal


Removes and installs piston retaining ring
Engines: All 3500, All 3600
• Part of 9U-5105 Basic Tool Gp.

CAT Dealer Required

204-8041 Ring Groove Gauge (3500 HD)


Used to check 3500 HD pistons for wear
Engines: 3500 HD (high displacement engines)
• Reference: NEHS0834 Tool Operating Manual

CAT Dealer Required

4C-4519 Gauge As.


Checks top and intermediate ring grooves to determine piston reusability
Engines: All 3500 (except 3524B)

CAT Dealer Required

CRANKSHAFT,
MAIN 155-8795 Gauge - Crankshaft Distortion
BEARINGS &
Checks crankshaft bearing alignment or shaft deflection
FLYWHEEL Engines: All 3500, All 3600

CAT Dealer Required

Caterpillar: Confidential Green Page 3 of 22


Last Modified: 10/24/2003
3500 Family - Tool List
CRANKSHAFT,
MAIN 230-5843 Main Bearing Cap R & I
BEARINGS &
Used to remove and install 3/4" thd main bearing cap on early 3500 Engines.
FLYWHEEL Engines: All 3500 with 3/4" thd main bearing cap
• Two required
Use 236-6688 Main Bearing Cap R & I tooling for later 3500 Engines with 7/8" thd main brg cap

CAT Dealer Recommended

236-6688 Main Bearing Cap R & I


used to remove and install 7/8" thd main bearing cap on later 3500 engines
Engines: All 3500 (with 7/8" main bearing cap)
• Two required
• Use 230-5843 Main Bearing Cap R & I tool on earlier 3500 engines with 3/4" thd main brg cap

CAT Dealer Recommended

8B-7561 Step Plate


Used to remove front crankshaft pulley, gear & camshaft drive gear
Engines: 3208, 3400, 3500, G3600

CAT Dealer Required

187-1841 Installer - Seal & Wear Sleeve


Installs rear crankshaft seal and wear sleeve on 3524B rear engine
Engines: 3524B

CAT Dealer Required

192-6339 Locator As. - Crankshaft Seal


Installs rear crankshaft seal and wear sleeve on 3524B rear engine
Engines: 3524B

CAT Dealer Required

1U-7325 Distorter Adapter


Used to remove front & rear crankshaft seal and wear sleeve
Engines: All 3500

CAT Dealer Recommended

5P-7409 Distorter
Used to remove crankshaft seal and wear sleeves
Engines: 3406, All 3500, All 3600
• Part of 9U-5105 Basic Tool Gp.

CAT Dealer Required

6V-3143 Distorter Adapter


Used to remove crankshaft seal and wear sleeve
Engines: All 3500 (with seal adapter group)

CAT Dealer Required

Caterpillar: Confidential Green Page 4 of 22


Last Modified: 10/24/2003
3500 Family - Tool List
CRANKSHAFT,
MAIN 6V-4001 Forcing Ring
BEARINGS &
Used to install crankshaft seal and wear sleeve
FLYWHEEL Engines: All 3500

CAT Dealer Required

6V-4002 Forcing Bracket


Used to install crankshaft seal and wear sleeve
Engines: All 3500
• Two required

CAT Dealer Required

6V-4003 Locator
Used to install crankshaft seal and wear sleeve
Engines: All 3500
• Requires (2) 2N-5006 Bolts

CAT Dealer Required

6V-4977 Installer
Installs crankshaft seal and wear sleeve
Engines: 3500 (with 1W6975 & 1W6978 Adapter Gp.)

CAT Dealer Required

8T-3099 Installer
Installs crankshaft seals and wear sleeves
Engines: 3500 (without 1W6975 & 1W6978 Adapter Gp.)

CAT Dealer Required

9S-8858 Nut As.


Used to install crankshaft seal and wear sleeve
Engines: All engines (except 3000 & 3600)
• Part of 1U-7598 Rear Seal Installer Gp.

CAT Dealer Required

1P-4000 Tool Gp - Line Boring


Used to bore semi-finished bearing caps
Engines: 3100, 3200, All 3400, All 3500
• Reference: SMHS7607 Special Instruction, SEBF4500 Engine Component and Reconditioning
Guide, SMHS7607 Special Instructions

CAT Dealer Recommended

2P-5517 Bearing R&I Tool


Used to remove and install main bearing upper halves
Engines: All 3500

CAT Dealer Required

Caterpillar: Confidential Green Page 5 of 22


Last Modified: 10/24/2003
3500 Family - Tool List
CRANKSHAFT,
MAIN 9U-5023 Wrench - Main Bearing
BEARINGS &
Used to remove and install crankshaft main bearing
FLYWHEEL Engines: All 3500

CAT Dealer Required

203-6597 Repair Kit - Thread


Used to repair main bearing cap bolt holes
Engines: 3500 (with 3/4" main bearing cap bolt holes)
• This kit is not serviced - see T&SPG (NENG2500) for content
• Reference: SEBF8387 Main Bearing Bolt Hole Repair

CAT Dealer Required

203-6598 Repair Kit - Thread


Used to repair main bearing cap bolt holes
Engines: 3500 (with 7/8" main bearing cap bolt holes)
• This kit is not serviced - see T&SPG (NENG2500) for content
• Reference: SEBF8387 Main Bearing Bolt Hole Repair

CAT Dealer Required

CAMSHAFT &
TIMING GEARS 125-0200 Pilot - Camshaft
Used to pilot camshaft during removal and installation
Engines: 3500B/C

CAT Dealer Required

125-0201 Guide As. - Camshaft


Used to install camshaft
Engines: 3500B/C

CAT Dealer Required

4C-9991 Idler Shaft Retrofit Tool Gp


Used to retrofit idler gear shaft
Engines: 3500A
•See T&SPG (NENG2500) for details

CAT Dealer Recommended

8B-7548 Push - Puller


Removes front crankshaft pulley and camshaft drive gear
Engines: 3208, All 3300, All 3400, All 3500, All 3600
• Item #3

CAT Dealer Required

8T-3167 Guide As.


Used to install camshaft
Engines: 3500A, G3500

CAT Dealer Required

Caterpillar: Confidential Green Page 6 of 22


Last Modified: 10/24/2003
3500 Family - Tool List
CAMSHAFT &
TIMING GEARS 8T-3168 Pilot As.
Used to install camshaft
Engines: 3500A, G3500

CAT Dealer Required

8T-3169 Crank As.


Used to install camshaft
Engines: All 3500

CAT Dealer Required

6V-4077 Tool Gp. - Camshaft Bearing


Removes and installs camshaft bearings
Engines: All 3500
• Used with 8S-2241 Tool Gp.

CAT Dealer Required

8S-2241 I & R Gp. - Camshaft Bearing


Removes and installs camshaft bearings
Engines: All engines (except 3600)

CAT Dealer Required

125-2739 Pilot - Cam Bearing


Used to remove and install camshaft bearings
Engines: 3500B/C
• Used with 6V-4077 Camshaft Bearing Tool Gp. & 8S-2241 Camshaft Bearing I & R Gp.

CAT Dealer Required

125-2740 Plate - Backup


Used to remove and install camshaft bearings
Engines: 3500B/C
• Used with 6V-4077 Camshaft Bearing Tool Gp. & 8S-2241 Camshaft Bearing I & R Gp.

CAT Dealer Required

125-2741 Sleeve - Cam Bearing


Used to remove and install camshaft bearings
Engines: 3500B/C
• Used with 6V-4077 Camshaft Bearing Tool Gp. & 8S-2241 Camshaft Bearing I & R Gp.

CAT Dealer Required

CYLINDER
HEAD, 124-0662 Socket
VALVES &
Removes and installs cylinder head bolts (3/4"-12 point socket)
CAM Engines: 3406C/E, 3456, C-15/16, All 3500
FOLLOWERS

CAT Dealer Recommended

Caterpillar: Confidential Green Page 7 of 22


Last Modified: 10/24/2003
3500 Family - Tool List
CYLINDER
HEAD, 155-1536 Tool Kit - Valve Recession
VALVES &
Measures valve seat wear and valve projection
CAM Engines: All 3500
FOLLOWERS

CAT Dealer Required

166-7441 Tool Gp. - Valve Seat Extractor


Used to remove valve seat inserts
Engines: All engines (except 3600)
• Reference: SMHS7935 Special Instruction

CAT Dealer Required

241-0124 Compressor - Valve Spring


Compresses all four valve springs on or off engine
Engines: All 3500

CAT Dealer Required

4C-9496 Tester - Valve Spring


Tests coil springs for print conformance (545 kg max. test force)
Engines: All 3500, All 3600

CAT Dealer Recommended

5P-3536 Gauge Gp - Valve Guide


Measures valve guides for size, taper, and roundness
Engines: 3100, 3200, All 3300, 3176/96, C7, C-10/12, C11, C13, All 3400, C-15/16, C15, All 3500

CAT Dealer Recommended

6V-0087 Gauge - Valve Stem


Measures valve stem wear
Engines: 3100,3200, All 3300, All 3400, All 3500

CAT Dealer Required

6V-2032 Adapter
Used to mount brush on bench or pedestal grinder
Engines: All engines
• Used with 6V-2033 Brush
• Two required

CAT Dealer Recommended

6V-2033 Brush
Cleans and polishes engine valve stems
Engines: All engines
• Requires (2) 6V-2032 Adapters

CAT Dealer Recommended

Caterpillar: Confidential Green Page 8 of 22


Last Modified: 10/24/2003
3500 Family - Tool List
CYLINDER
HEAD, 6V-4009 Driver - Dowel
VALVES &
Used to install valve train bridge dowels to correct height
CAM Engines: All 3500
FOLLOWERS

CAT Dealer Required

147-2056 Indicator - Dial (inch)


Used to set engine valve lash
Engines: All 3500
• Used with 147-5482 Valve Lash Gauge Gp.
• Item #4

CAT Dealer Recommended

147-2059 Wrench - Torque


Used to torque rocker arm nuts (preset to 70 N-m)
Engines: All 3500
• Used with 147-5482 Valve Lash Gauge Group

CAT Dealer Recommended

147-2060 Wrench - Socket


Used to torque rocker arm nuts
Engines: All 3500
• Use with 147-5482 Valve Lash Gauge Group

CAT Dealer Recommended

147-5482 Gauge Gp - Valve Lash


Set engine valve lash using factory setting methods
Engines: All 3500
• Requires 147-2056 or 147-5537 Dial Indicator

CAT Dealer Recommended

147-5537 Indicator - Dial (metric)


Used to set engine valve lash
Engines: All 3500
• Used with 147-5482 Valve Lash Gauge Gp.
• Item #4

CAT Dealer Recommended

5P-0942 Extractor
Used to remove bridge dowels from cylinder head 11,13 mm (.438 inch)
Engines: 3176/96, C-10/12, C11, C13, 3400, C-15/16, C15, All 3500
• Used with 5P-0944 Dowel Puller Gp.

CAT Dealer Required

5P-0944 Puller Gp. - Dowel


Used to pull 0.375" diameter dowels
Engines: All 3400, All 3500

CAT Dealer Required

Caterpillar: Confidential Green Page 9 of 22


Last Modified: 10/24/2003
3500 Family - Tool List
CYLINDER
HEAD, 6V-7068 Gauge
VALVES &
Used to check valve guide wear limits
CAM Engines: 3300, 3400, 3508/12
FOLLOWERS
•See T&SPG for application

CAT Dealer Required

5S-1330 Compressor - Valve Spring


Used to remove and install valve springs (off engine)
Engines: All engines (except 3600)

CAT Dealer Required

5P-1729 Installer Bushing


Used to install valve guides
Engines: All 3500
• Item #2

CAT Dealer Required

7M-3975 Driver
Removes and installs valve guides
Engines: All 3500
• Item #1

CAT Dealer Required

125-2742 Base As. (for 3500)


Used to measure valve lash settings
Engines: 3500A
• Item #1

CAT Dealer Recommended

125-2743 Collar Gp.


Used to measure valve lash setting
Engines: 3500A
• Item #3

CAT Dealer Recommended

4C-8246 Indicator
Used to measure valve lash settings
Engines: 3500A
• Item #4

CAT Dealer Recommended

FUEL SYSTEM
REPAIR & 1U-8701 Socket
ADJUST
Used to remove and install unit injector nozzle
Engines: 3500A

CAT Dealer Recommended

Caterpillar: Confidential Green Page 10 of 22


Last Modified: 10/24/2003
3500 Family - Tool List
FUEL SYSTEM
REPAIR & 1U-9395 Plate
ADJUST
Used to remove and install unit injector nozzle
Engines: 3500A

CAT Dealer Recommended

4C-9279 Plate
Properly positions injector rack during assembly of unit injectors
Engines: 3500A
• Used with 6V-4830 Fixture Gp.
•SEHS9287 Special Instructions

CAT Dealer Recommended

6V-4062 Compressor
Used to install fuel injector springs
Engines: 3500A

CAT Dealer Recommended

6V-4172 Sleeve - Injector


Covers fuel ports when cleaning injectors
Engines: 3500

CAT Dealer Required

6V-4822 Tip Driver


Seperates tip assembly from nut during disassembly of injector
Engines: 3500A

CAT Dealer Recommended

6V-4830 Fixture Gp.


Disassembles & assembles unit injectors and checks rack movement
Engines: 3500A

CAT Dealer Recommended

9U-5132 Tool Gp. - Timing


Tests and adjusts injector fuel timing, rack synchronization & fuel setting
Engines: 3500A

CAT Dealer Required

1U-9361 Arm - Governor Torque


Used to test and adjust Woodward 3161 governor
Engines: 3500A, 3612/16
• Item #1 (3F7147 Bolt) included

CAT Dealer Required

Caterpillar: Confidential Green Page 11 of 22


Last Modified: 10/24/2003
3500 Family - Tool List
AIR SYSTEM &
MANIFOLDS 152-2067 Gauge - Differential Pressure
Monitors air pressure drop across aftercooler core
Engines: All 3500, All 3600

CAT Dealer Recommended

5P-6518 Fixture Gp - Parts Reusability


Measures turbo shaft straightness and engine valve lip thickness
Engines: All engines (except 3600)

CAT Dealer Recommended

9S-6343 Fixture As.


Used for disassembly and assembly of turbo rotating assembly
Engines: 3200, 3176, 3400, All 3500, G3600
• Item #1

CAT Dealer Recommended

9S-6363 Fixture Gp. - Turbocharger


Used for disasembly and assembly of turbocharger
Engines: 3200, 3176, C-10/12, C11, C13, 3400, C15, All 3500, G3600

CAT Dealer Recommended

LUBRICATION
SYSTEM 185-3630 Strap Wrench - Filter
Used to remove and install spin-on oil & fuel filters
Engines: All engines
• Replaces cancelled 2P-8250 strap wrench

CAT Dealer Required

COOLING
SYSTEM 4C-9046 Strainer - Temporary (5 inch)
Filters particles from coolant lines
Engines: All 3500
• Also available: 4C-9045 (4 in.) or 4C-9047 (6 in.) Temporary Strainers

CAT Dealer Recommended

FT2800 Puller Plate


Used to remove impeller from 199-5590 Water Pump
Engines: 3524B
• Used with 1P-0820 Hydraulic Puller Group

CAT Dealer Recommended

193-8094 Wrench - Spline


Used to disassemble and assemble seawater pump
Engines: 3500 (marine engines with 148-8000 Seawater Pump)
• Item #1
• Used with 193-8100 Impleller Nut Spanner

CAT Dealer Required

Caterpillar: Confidential Green Page 12 of 22


Last Modified: 10/24/2003
3500 Family - Tool List
COOLING
SYSTEM 193-8100 Spanner- Impeller Nut
Used to disassemble and assemble seawater pump
Engines: 3500 (marine engines with 148-8000 Seawater Pump)
• Item #2
• Used with 193-8094 Spline Wrench

CAT Dealer Required

DIAGNOSTIC
TOOLS 164-2192 Adapter Gp. - Probe Self Sealing
Used with pressure gauge to check fluid-filled compartments
Engines: All engines
• Used with 5P-2720, 5P-2725 or 5P-3591 Adapters

CAT Dealer Required

237-5130 True RMS Multimeter/IR Thermometer


Measures:AC/DC Volts,Amps,Frequency,Duty Cycle,Capacitance,Ohms,Type K
Engines: ALL

CAT Dealer Recommended

8T-5096 Dial Indicator Test Gp.


Used to take many different linear service measurements
Engines: All engines

CAT Dealer Required

171-4400 Communication Adapter II Gp.


Allows PC to communicate with engine data link
Engines: All engines (with electronic controls)

CAT Dealer Required

1U-6602 Photo-Tach Gp.


Measures engine RPM
Engines: All engines

CAT Dealer Recommended

1U-8860 Pickup Gp. - Blowby


Checks blowby volume on large engines
Engines: All 3500, All 3600
• Part of 148-2726 Maintenance tool Group
• Required 8T-2700 Blowby/Air Flow Group

CAT Dealer Required

8T-1000 Electronic Position Indicator Gp.


Measures dynamic and static rack position & other linear measurements
Engines: All Engines (with mechanical governor)

CAT Dealer Required

Caterpillar: Confidential Green Page 13 of 22


Last Modified: 10/24/2003
3500 Family - Tool List
DIAGNOSTIC
TOOLS 8T-2700 Blowby/Air Flow Indicator Gp.
Measures engine blowby gas & air velocity through radiator
Engines: 3200, 3300, 3400, All 3500
•- Part of 146-2726 Maintenance Tool Gp.
- For more information see SEHS8712 Special Instructions

CAT Dealer Recommended

8T-5200 Signal Generator/Counter Gp.


Measures frequency signals and generates square wave signal
Engines: All engines

CAT Dealer Recommended

9U-7400 Multitach II Gp.


Measures engine RPM, frequency, and engine set point
Engines: All engines

CAT Dealer Recommended

156-1070 Analyzer Gp. - Emission


Used to set-up, service, & monitor natural gas & diesel engine emissions
Engines: All engines
••- For more information, see PELJ0020 IRM & NEHS0713 Tool Manual
- Alternate Tool 156-1060 Emission Analyzer Group (Diesel )

CAT Dealer Recommended

146-4080 Multimeter Gp. - Digital (RS-232)


Measures voltage, current, resistance, duty cycle, temp, & more
Engines: All engines
•- Can be used with DataView to log any type of electrical signal (Requires 146-8488 Cable)
- For more information, see JEDG6000 Brochure & NEHS0554

CAT Dealer Recommended

212-2160 Compact Digital Multimeter


Measures voltage, current, resistance, duty cycle, temperature, & more
Engines: All Models
•Includes protective holster, (2) 1U-9535 Batteries, & Test Leads
For More Information, See

CAT Dealer Recommended

9U-7330 Multimeter - Fluke 87


Used to test and adjust electronic circuits
Engines: All generator sets
• See T&SPG (NENG2500) for other available models

CAT Dealer Recommended

6V-9130 Temp Adapter Gp.


Used to measure oil, coolant or air temperatures (-50°C to 900°C)
Engines: All engines
•- Used with 9U-7330 or 6V-7070 Digital Multimeter Groups
- For more information, see SEHS8382

CAT Dealer Required

Caterpillar: Confidential Green Page 14 of 22


Last Modified: 10/24/2003
3500 Family - Tool List
DIAGNOSTIC
TOOLS 6V-7072 Test Lead Set
Test Lead Kit for use with Digital Multimeters
Engines: All Models

CAT Dealer Recommended

7X-1710 Probe Gp.


Used to measure voltages without disconnecting wiring harness
Engines: All engines (with electronic controls)
•- Allows user to measure electrical signal from connector without separating connector
- Used with 6V-7070, 9U-7330, & 146-4080 Digital Multimeter Gp.

CAT Dealer Required

164-3310 Infrared Thermometer


Measures surface temperature without contact (battery powered)
Engines: All engines
• See T&SPG (NENG2500) for other available models
- For more information, see NEHP6017 Datasheet

CAT Dealer Recommended

164-3320 Infrared Thermometer


Measures surface temperature without contact (110 VAC or battery)
Engines: All engines
• See T&SPG (NENG2500) for other available models
- For more information, see NEHP6017 Datasheet

CAT Dealer Recommended

166-9030 Infrared Thermometer


Measures surface temperature without contact (220 VAC or battery)
Engines: All engines
• See T&SPG (NENG2500) for other available models
- For more information, see NEHP6017 Datasheet

CAT Dealer Recommended

192-3750 Infrared Thermometer


Measures surface temperature without contacting surface
Engines: All engines
• See T&SPG (NENG2500) for other available models
- For more information, see NEHP6017 Datasheet

CAT Dealer Recommended

192-3755 Infrared Thermometer


Measures surface temperatures without contacting surface
Engines: All engines
• See T&SPG (NENG2500) for other available models
- For more information, see NEHP6017 Datasheet

CAT Dealer Recommended

213-4310 Infrared Thermometer


Non-Contact Temperature Measurement
Engines: All Models

CAT Dealer Recommended

Caterpillar: Confidential Green Page 15 of 22


Last Modified: 10/24/2003
3500 Family - Tool List
DIAGNOSTIC
TOOLS 4C-6090 Multichannel Temp Selector
Measures up to sixteen temperatures individually
Engines: All 3500
•- Used with 6V-7070 & 9U-7330 Multimeters with 6V-9129 Temperature Adapter
- OR Used with 146-4080 Multimter with type K Measurement capability

CAT Dealer Required

4C-6500 Digital Thermometer Gp.


Used to measure and record temperatures
Engines: All engines

CAT Dealer Recommended

8T-2844 Recorder Gp.


Measures highest surface temperature of engine components
Engines: All engines

CAT Dealer Required

146-1738 Borescope - Precision (12")


Used to make visual inspection of internal surfaces
Engines: All engines
• See T&SPG (NENG2500) for other available models
- For more information see NEHS0504 Tool Opeating Manual & PELJ0046 IRM

CAT Dealer Recommended

8T-9290 Borescope - Battery Operated


Used to make visual inspection of internal surfaces
Engines: All engines
• See T&SPG (NENG2500) for other available models
- For more information see NEHS0504 Tool Operating Manual & PELJ0046 IRM

CAT Dealer Recommended

1U-5268 Borescope
Used to make visual inspection of internal surfaces
Engines: All engines
•- Used with Light Source 1U-56266(110 VAC) 190-8160 (220V) & 1U-5265 (Battery)
- For more information see NEHS0504 Tool Opeating Manual & PELJ0046 IRM

CAT Dealer Recommended

9U-6940 Borescope - Right-angle View


Used to inspect internal openings and passages
Engines: All engines
•- Used with Light Source 1U-56266(110 VAC) 190-8160 (220V) & 1U-5265 (Battery)
- For more information see NEHS0504 Tool Opeating Manual & PELJ0046 IRM

CAT Dealer Recommended

186-0170 Flexible Shaft Borescope


Used to make visual inspection of internal surfaces
Engines: All engines
• Used with 1U-56266 Light Source (110 VAC)
- Used with Light Source 1U-56266(110 VAC) 190-8160 (220V) & 1U-5265 (Battery)

CAT Dealer Recommended

Caterpillar: Confidential Green Page 16 of 22


Last Modified: 10/24/2003
3500 Family - Tool List
DIAGNOSTIC
TOOLS 186-0180 Borescope - Rigid Tube
Used to make visual inspection of internal surfaces
Engines: All engines
•- Used with Light Source 1U-56266(110 VAC) 190-8160 (220V) & 1U-5265 (Battery)
- For more information see NEHS0504 Tool Opeating Manual & PELJ0046 IRM

CAT Dealer Recommended

1U-5266 Light Source (110 VAC)


Provide illumination for borescopes
Engines: All engines
•- Alternative Tool: 190-8160 Light Source (220 VAC)
- Used with 1U-5268, 9U-6940, 186-0170, and 186-0180 Borescopes

CAT Dealer Recommended

190-8160 Light Source


Provide illumination for borescopes
Engines: All Models

CAT Dealer Recommended

1U-5265 Battery Operated Light Source


Portable Light Source for Field Use
Engines: All Models

CAT Dealer Recommended

198-4240 Digital Pressure Indicator


Measures Pressure, Vacuum, Differential Pressure, & Temperature
Engines: All Models

CAT Dealer Recommended

1U-5470 Engine Pressure Gp.


Checks pressures on turbocharged diesel and natural gas engines
Engines: All engines

CAT Dealer Required

5P-7277 Tester - Voltage


Used to make quick checks for presence of voltage
Engines: All engines

CAT Dealer Required

8T-0500 Light - Continuity Testing


Used to test for non-energized or open circuits
Engines: All engines
•- Replaces canceled 8S-4627 Circuit Continuity Tester

CAT Dealer Required

Caterpillar: Confidential Green Page 17 of 22


Last Modified: 10/24/2003
3500 Family - Tool List
DIAGNOSTIC
TOOLS 177-2330 Digital Battery Analyzer
Used to evaluate the condition of 6 & 12 volt batteries
Engines: All engines

CAT Dealer Recommended

4C-6600 Battery Voltmeter


Measures battery voltage to determine state of charge
Engines: All engines

CAT Dealer Recommended

1U-7297 Coolant and Battery Tester


Checks coolant freezing point and battery charge condition (degrees F)
Engines: All Engines
•- Alternative Tool: 1U-7298 Coolant and Battery Tester (degrees C)

CAT Dealer Required

1U-7298 Coolant and Battery Tester


Checks coolant freezing point and battery charge condition (degrees C)
Engines: All Engines
•- Alternative Tool: 1U-7297 Coolant and Battery Tester (degrees F)

CAT Dealer Recommended

131-5051 DataView TechStation Gp.


PC based diagnostic tool that measures and records engine parameters
Engines: All engines
•- Uses standard Cat sensors and replaces 15+ green sensor boxes
- For more information, see NEHS0662 Tool Operating Manual & NEHP6016 Datasheet

CAT Dealer Recommended

154-8102 Fuel Flow Measurement System


Measures diesel engine fuel burn rate on 3408/12E, 3500
Engines: 3408/12E (PEEC & HEUI), 3500
•Used with 154-8106 Fuel Flow Display

CAT Dealer Required

153-9630 Test Gp. - Sensor


Used to test CAT ® PWM and analog sensors
Engines: All engines (with electronic controls)
•- Used with 131-5050 or 131-5051 DataView Gp.

CAT Dealer Recommended

213-3274 Sensor - Pressure (100 psi)


Pressure sensor for use with DataView
Engines: All engines
•- Used with 131-5050 or 131-5051 DataView Gp.

CAT Dealer Recommended

Caterpillar: Confidential Green Page 18 of 22


Last Modified: 10/24/2003
3500 Family - Tool List
DIAGNOSTIC
TOOLS 213-3275 Sensor - Pressure (1000 psi)
Pressure sensor for use with DataView
Engines: All engines
•- Used with 131-5050 or 131-5051 DataView Gp.

CAT Dealer Recommended

213-3276 Sensor - Pressure (7500 psi)


Pressure sensor for use with DataView
Engines: All engines
•- Used with 131-5050 or 131-5051 DataView Gp.

CAT Dealer Recommended

151-6320 Removal Tool (SXL/GXL)


Removes pins and sockets from Deutsch & AMP connectors
Engines: 3116/26, C7, C-9, 3176/96, C-10/12, C11/C13, 3406E, C-15/16, C15, 3408/12, All 3500
•- For more information, see SEHS9615 Special Instruction

CAT Dealer Required

175-3700 DT Connector Service Kit


Used to service and repair Deutsch "DT" type connectors
Engines: 3116/26, C7, C-9, 3176/96, C-10/12, C11/C13, 3406E, C-15/16, C15, 3408/12, All 3500
•- For more information, see SEHS9615 Special Instruction

CAT Dealer Required

190-8900 HD Connector - Field Service Kit


Used to service Deutsch HD type connectors
Engines: 3116/26, C7, C-9, 3176/96, C-10/12, C11/C13, 3406E, C-15/16, C15, 3408/12, All 3500
•For more information, see SEHS9615 Special Instruction

CAT Dealer Required

129-2018 Cable As. - Power


Provides access to data link from 40-pin ECM and powers service tools
Engines: 3100, C-10/12, 3406E, 3456

CAT Dealer Recommended

134-5195 Cable As. - Adapter (40 pin)


Adapts 7X-1715 Cable Assembly to a 40-pin CD-keyed connector
Engines: All 3500, All 3600

CAT Dealer Recommended

139-4166 (CAT/ATA) Universal Cable


Connects ATA data-link or the CAT (CDL) data-link to 7X-1700 Comm Adapter
Engines: All engines (with electronic controls)

CAT Dealer Recommended

Caterpillar: Confidential Green Page 19 of 22


Last Modified: 10/24/2003
3500 Family - Tool List
DIAGNOSTIC
TOOLS 167-9225 Harness As.
Provides access during cranking to ECM with 70-pin Data Link
Engines: 3126B,C-9, C-10/12, C11/C13, 3406E, C15

CAT Dealer Recommended

208-0059 Cable Assembly


70 Pin Breakout T Cable Assembly
Engines:
• Used to provide test point for all individual wires in Engine wiring harness of ADEM III
• Connects between ECM and main wiring harness

CAT Dealer Recommended

7X-1715 Cable As. - Small (40 Pin)


Provides tests points for individual wires in wiring harness
Engines: 3126B, 3176/96, C-10/12, 3400E, C-15/16

CAT Dealer Recommended

8T-0450 Thread Identification Kit


Used to determine thread sizes
Engines: All engines

CAT Dealer Recommended

6V-7898 Dial Bore Gauge - Metric


Measures internal diameters (50 to 200 mm) & depths (13 to 300 mm)
Engines: All engines
•- Used with 6V-7899 Size Setting Fixture
- See T&SPG (NENG2500) for other available models

CAT Dealer Recommended

LIFTING,
POSITIONING 8S-6691 Stand Group - Cylinder Head
& HOLDING
Supports cylinder head on work bench during repair process
TOOLS Engines: All engines (except 3600)
• Two reqiured

CAT Dealer Recommended

4C-9832 Roll-Over Stand - Large Engine


Used for disassembly and assembly of engine
Engines: 3408/12, 3500
• See T&SPG (NENG2500) for reqiured engine adapter plates

CAT Dealer Recommended

HAND TOOLS
1P-1861 Retaining Ring Pliers
Used to remove and install retaining rings (No. 25)
Engines: 3200, 3300, 3176/96, C-10/12, C11/C13, 3400, C-15/16, C15, All 3500

CAT Dealer Required

Caterpillar: Confidential Green Page 20 of 22


Last Modified: 10/24/2003
3500 Family - Tool List
PUMPS,
HYDRAULIC 1P-0820 Hydraulic Puller Gp.
CYLINDERS &
Used to push or pull bearings, gears, shafts, or other press fit parts
PULLERS Engines: All engines

CAT Dealer Required

1P-2322 Combination Puller (2 or 3 Jaw)


General purpose puller
Engines: All engines

CAT Dealer Recommended

3H-0465 Plate
Used with tooling for removal and installation of gears, bearings, etc.
Engines: All engines

CAT Dealer Recommended

9U-6600 Hand Pump Gp.


Manually operated hydraulic pump (10,000 psi)
Engines: All engines
• See T&SPG (NENG2500) for other available models

CAT Dealer Required

1P-2320 Combination Puller


Combination 2 or 3 jaw puller (5 ton capacity)
Engines: All engines

CAT Dealer Recommended

MISC. TOOLS
& SUPPLIES 1P-0510 Driver Gp. - Bearing and Seal
General purpose bearing and seal driver kit
Engines: All engines

CAT Dealer Required

1P-0520 Driver Gp - Bearing and Seal


Installs bearings, races, and seals
Engines: All engines (except 3000)

CAT Dealer Required

5F-7465 Puller
Used to remove gears, pulleys, and flanges
Engines: All engines

CAT Dealer Recommended

Caterpillar: Confidential Green Page 21 of 22


Last Modified: 10/24/2003
3500 Family - Tool List
MISC. TOOLS
& SUPPLIES 9S-9155 Spacer
Used to install bearings and seals
Engines: 3176/96, C-10/12, 3306B/C, 3408/12, All 3500
• Part of 1P-0500, 1P-0510 & 1P-0520 Driver Gp.

CAT Dealer Recommended

FT1561 Cabinet - Storage - Cylinder Liner


Keeps cylinder liners clean after reconditioning
Engines: All 3500

CAT Dealer Recommended

FT2449 Bracket - Indicator


Checks engine to generator alignment
Engines: 3516 (locomotive engine)

CAT Dealer Recommended

NEW
238-9586 Engine Turning Tool
Used to manually rotate engine crankshaft.
Engines: C-9 thru C-16 and 3300 thru 3500
•Mount to tool access opening in flywheel housing
Needle bearings enable smoother turning of crankshaft

CAT Dealer Required

9S-9082 Turning Tool


Used to manually rotate engine crankshaft
Engines: C-9 thru C-16 and 3300 thru 3500

CAT Dealer Required

Caterpillar: Confidential Green Page 22 of 22


Last Modified: 10/24/2003

You might also like