Scribd
Upload
307 views

ATF20D - 40D Function Generator

This document provides information on the ATF20D and ATF40D DDS function generators from UCE Research & Development. The generators use Direct Digital Synthesis technology and have features like two independent output channels, standard and custom waveforms, modulation functions, and sweep capabilities. They provide output signals up to 20MHz or 40MHz respectively and include accessories like cables and a user guide.

Uploaded by

pressotti
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
307 views

ATF20D - 40D Function Generator

This document provides information on the ATF20D and ATF40D DDS function generators from UCE Research & Development. The generators use Direct Digital Synthesis technology and have features like two independent output channels, standard and custom waveforms, modulation functions, and sweep capabilities. They provide output signals up to 20MHz or 40MHz respectively and include accessories like cables and a user guide.

Uploaded by

pressotti
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

ATF20D, ATF40D

DDS Function Generator 20MHz, 40MHz

INTRODUCTION

ATFxxD series Function generator uses Direct Digital Synthesis (DDS) technology. Its outstanding performance and system features make it a
perfect solution for your testing requirement. The simplified and optimized design of the front panel and dual-language (English/Chinese) TFT
display interface make your testing much easier for operation and observation. Additionally, the extendable optional functions can also improve your
system characteristics.

FEATURES

• Direct Digital Synthesis(DDS) technology, 2 independent output channels


• 3.5-inch TFT LCD display
• 32 kinds of standard or build-in fixed waveforms
• Minimum stable output waveform: 1mV(50Ω)
• Multiple modulation functions: FM, FSK, ASK, PSK
• Frequency sweep, amplitude sweep, burst and A+B functions
• Count the frequency, period, amplitude RMS value or peak-to-peak value
• Over voltage, over current, short circuit protection, reverse voltage protection.
• Optional configurations: RS232 interface, USB interface, Frequency Counter, Power Amplifier

SPECIFICATIONS

Output A Characteristics
WAVEFORM Waveform type sine, square, pulse, DC

Waveform length 4～16000 points

Sample rate 180 MSa/s


Waveform Amplitude Resolution 10 bits

≥50dBc (≤1MHz), ≥ 40dBc (1MHz～20MHz),


Sinusoidal Harmonic Rejection
≥30dBc (20MHz～40MHz)

Sine Wave Total Distortion ≤0.5 % (20Hz～200kHz)

Pulse Wave and Square Wave rise or fall time: ≤20ns, overshoot: 5%

Square Wave Duty Cycle 50%

40mHz～the maximum frequency, resolution: 40 mHz


Frequency range
40µHz～1kHz, resolution: 40μHz
FREQUENCY

Frequency Accuracy ±(5x10-5 + 40mHz)

2mVpp～20Vpp (high impedance)


Amplitude range
Resolution: 20mVpp (amplitude > 2V), 2mVpp (amplitude < 2V)

Amplitude Resolution 20mVpp (amplitude > 2V), 2mVpp (amplitude < 2V)

Amplitude Accuracy ±(1%+2 mVrms) (high impedance, RMS, frequency 1 kHz)

±5% (frequency<1MHz), ±10% (frequency between 1MHz～10MHz)


Amplitude Flatness
±20% (frequency between 10 MHz～60MHz)
AMPLITUDE
Amplitude stability ± 0.5%/ 3 hours

Output impedance 50 Ω

1mVpp～10Vpp, when output frequency ≤10MHz


Sine Wave Amplitude Setting Range
1mVpp～5Vpp, when output frequency ≤40MHz
(50Ω)
1mVpp～2Vpp, when output frequency ≥ 40MHz

2mVpp～20Vpp, when output frequency ≤10MHz


Amplitude Setting Range (high
2mVpp～10Vpp, when output frequency ≤40MHz
impedance)
2mVpp～4Vpp, when output frequency ≥40MHz

Offset Range ±10 V (high impedance)

OFFSET Offset Resolution 20mV

Offset accuracy ±(1%+ 20mV)

Sweep Type Linear sweep or frequency or amplitude

Sweep range free to set the start and stop points

Sweep step larger than any figure of the resolution


SWEEP
Sweep rate 10ms~60s/step

Sweep mode Up, Down, Up-Down,

Manual Sweep Step/time

Modulation signal Internal or external waveforms


FM
FM Deviation 0%～20%

AM Modulation signal Internal or external waveforms


AM Depth 0%～120%

FSK Free to set the hop frequency and the carrier frequency

ASK Free to set the hop amplitude and the carrier amplitude
SHIFT KEYING
PSK Hop Phase: 0 ~ 360°, Max. resolution: 11.25°

Alternate rate 10ms ~ 60s

Output B Characteristics
Waveform type 32 kinds of waveforms, like sine, square, triangle, sawtooth, ladder etc

Waveform length 1024 points


WAVEFORM
Sample rate 12.5 MSa / s

Amplitude resolution 8 bits

Frequency range 40mHz ~ 1MHz(sine) 10mHz ~100kHz (other waveforms)

FREQUENCY Frequency Resolution 10mHz

-5
Frequency Accuracy ± (1×10 + 10mHz)

Amplitude range 50mVpp ~ 20Vpp (high impedance)

AMPLITUDE Amplitude Resolution 20mVpp

Output impedance 50Ω

Channel B frequency is the harmonic


wave of channel A.

Harmonic Time 0.1～250.0 times


HARMONIC
Harmonic Frequency <1MHz

Phase Adjustment coarse adjustment: 11.25 degree/step, fine adjustment: 2 degree/step


Channel B signal is used as burst
signal
Frequency of Channel B 40mHz～1MHz

BURST Burst Frequency 30mHz～50kHz

Burst count 1~65000 cycles

Burst mode continuous burst and single burst

TTL Output Characteristics


Waveform square wave, rise or fall time ≤20ns

TTL Frequency same as the output A

Amplitude TTL, CMOS compatible, low: <0.3V, high:>4V


GENERAL CHARACTERISTICS

AC220V (1±10%)
Power Supply
AC110V (1±10%) (Pay attention to the voltage selection on rear panel)

Frequency 50Hz (1±5%)

Power Consumption < 45VA

Operating Temperature 0°C to +40°C

Operating Humidity <80%

Operation Characteristics Key operation for all functions, menu display, rotary dial adjustment

Dimensions 415mm x 295mm x 195mm

Display TFT display, 320*240

Weight 3.5kg

ACCESSORIES INCLUDED

Standard Optional Parts


• ATFxxD Series DDS Function Generator 1 unit • RS232 interface
• Power cord 1 pc • USB universal serial bus interface
• Q9 testing cable 1 Pc • Power amplifier
• Q9 BNC-clip test lead 1 pc • Frequency counter
• User's Guide 1 pc
• RS232 cable (optional) 1 pc

Ordering Information

ATF20D : 40µHz～20MHz
ATF40D : 40µHz～40MHz

Reflecting Atten’s commitment to high quality standards in product, design, development, production, installation, and service, our manufacturing and distribution facility has received the ISO 9001 certification.
We pursue a policy of continuous development and product improvement. Thus the specifications and picture in this Spec sheet may be changed to make product improvements at any time and without notice and is not responsible for
typographical errors.

UCE RESEARCH & DEVELOPMENT SDN BHD


1C-3, DESARIA, JALAN KENARI, SUNGAI ARA, 11900 PENANG, MALAYSIA.
TEL : +60-4-6426526 FAX : +60-4-6452852 EMAIL : [email protected] WEBSITE : www.mp-estore.com

You might also like