Scribd
Upload
62 views

ADC Prog

This C program is reading an analog input from a pin and displaying the value on an LCD. It defines functions for sending data to the LCD and inserting delays. The main function sets up timers and ports, then enters a loop to continually read the analog pin, convert the value to a 3 digit number, and display it on the LCD.

Uploaded by

chandrasekar
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
62 views

ADC Prog

This C program is reading an analog input from a pin and displaying the value on an LCD. It defines functions for sending data to the LCD and inserting delays. The main function sets up timers and ports, then enters a loop to continually read the analog pin, convert the value to a 3 digit number, and display it on the LCD.

Uploaded by

chandrasekar
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

#include <REGX51.

H> void delay(unsigned int msec) // Function to


#define ADC P1 provide time delay in msec.
{
sbit CH1 = P2^0; int i,j ;
sbit CH2 = P2^1; for(i=0;i<msec;i++)
sbit CH3 = P2^2; for(j=0;j<1275;j++);
}
sbit ALE=P2^3;
sbit OE=P2^4; void send(unsigned char dat) //Function to
send command to LCD
sbit SC=P2^5; {
sbit EOC=P2^6; TI=0;
void send(unsigned char); SBUF=dat;
unsigned char x,y,z; while(TI==0);
void delay(unsigned int msec); TI=0;
unsigned char val; }

void main()
{ ADC Program
TMOD=0x20;
SCON=0x50;
TH1=-3;
TR1=1;
EOC = 1; /* EOC as input */
ALE = OE = SC = 0;
while(1)
{
CH1=1;
CH2=0;
CH3=0;
ALE=1;
SC=1;
ALE=0;
SC=0;
while(EOC==1);
while(EOC==0);
OE=1;
val=ADC;

send('A');
x=val/100;
send(x+0x30);

y=((val%100)/10);
send(y+0x30);

z=val%10;
send(z+0x30);
delay(1);
OE=0;
}
}

You might also like