Scribd
Upload
129 views2 pages

Y Column Design Calculations

This document provides design parameters and calculations for the column reinforcement of a concrete column. The column has a height and width of 650 mm with 25 mm cover. Longitudinal reinforcement is calculated to be 12 D25 bars with a spacing of 150 mm to resist the minimum required forces of 920 kN for pull-out and 219 kNm for bending moment. Transverse reinforcement is calculated as 4 D13 bars at 100 mm spacing to resist a minimum shear of 181 kN.

Uploaded by

salman
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
129 views2 pages

Y Column Design Calculations

This document provides design parameters and calculations for the column reinforcement of a concrete column. The column has a height and width of 650 mm with 25 mm cover. Longitudinal reinforcement is calculated to be 12 D25 bars with a spacing of 150 mm to resist the minimum required forces of 920 kN for pull-out and 219 kNm for bending moment. Transverse reinforcement is calculated as 4 D13 bars at 100 mm spacing to resist a minimum shear of 181 kN.

Uploaded by

salman
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

COLUMN DESIGN

Mu 380 KNm
Pu min 920 KN
Pu max 2600 KN
f c' 25 MPa
fy 400 MPa
fys 300 MPa
bk 650 mm
hk 650 mm
D 25 mm
ds 13 mm
Mnb,ki(-) 270 KNm
Mnb,ki(+) 95 KNm

Longitudinal Reinforcement
Pu / (fc' bh), min 0.09
Mu / (fc' bh2) 0.06
ρ 0.01

Pu / (fc' bh), max 0.25


Mu / (fc' bh2) 0.06
ρ 0.01
∑Mnb= 6/5 {Mnb,ki(+) + Mnb,ki(-)}
438 KNm

As size and hight of column is same, so nominal moment of beam is distributed as same (Ei/L column same)

Mn, Kol 219 KNm So using ρ as 0.01 (1%)


Pu / (fc' bh), min 0.09 As = ρ bh 4225 mm2
2
Mn / (fc' bh2) 0.03 As of D25 490.87 mm
ρ 0.01 n 8.6070993 ≈ 12
2
total As 5890.4862 mm
Pu / (fc' bh), max 0.25 12 D25 Reinforcement longitudinal
2
Mn / (fc' bh ) 0.03
ρ 0.01

Transverse Reinforcement

cover 40 mm
bc 570 mm
Ag 422500 mm2
Ach 324900 mm2
2
Ash / s 4.281 mm /mm ----- (A)
Ash / s 4.275 mm2/mm ----- (B)

Mprb,Ki(-) 411.10 KNm


Mprb,Ki(+) 205.55 KNm
Mprb,Ka(-) 411.10 KNm
Mprb,Ka(+) 205.55 KNm

Mpr from beam 308.325 KNm --------------(A)


Pu min 920 KN
Pu max 2600 KN
From interaction diagram
Nod, min 0.09 Mod 0.1
Nod, max 0.25 Mod 0.14

Mpr 961.1875 KNm ---------------- (B)

From (A) and (B) Mpr is most small one


Mpr 308.325 KNm

Ln= hkol - hbal = 4-0.6 3.4 m

Vek 181.367647 KN
Vek max 241.823529 KN

Ash / s 1.379 mm2/mm ----- (C)


Let, S=100 mm
Ash will be the max value from (A), (B), & (C )
Ash 428.07 mm2

Total no. of leg 3.22506435 so total leg 4


4 D13-100 Transversal Reinforcement

Smax
162.5 mm
150 mm

hx= 185.67 mm
154.78 mm

d.

S 150 mm

You might also like