Scribd
Upload
103 views4 pages

1 Angle - Orthographic Projection: Important

Orthographic projection is a method of drawing 3D objects in 2D by showing front, side, and plan views to allow all important sides to be seen. There are two methods: first angle and third angle projection. First angle projection positions the front view closest to the object, followed by the side view, and then the plan view above. An example shows the front, side, and plan views of an L-shape drawn using first angle projection guidelines to keep the views level and aligned.

Uploaded by

Umer
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
103 views4 pages

1 Angle - Orthographic Projection: Important

Orthographic projection is a method of drawing 3D objects in 2D by showing front, side, and plan views to allow all important sides to be seen. There are two methods: first angle and third angle projection. First angle projection positions the front view closest to the object, followed by the side view, and then the plan view above. An example shows the front, side, and plan views of an L-shape drawn using first angle projection guidelines to keep the views level and aligned.

Uploaded by

Umer
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 4

1st Angle - ORTHOGRAPHIC PROJECTION

Orthographic Projection is a way of drawing a 3D object from different directions. Usually a front, side
and plan view is drawn so that a person looking at the drawing can see all the important sides.
Orthographic drawings are useful especially when a design has been developed to a stage whereby it
is almost ready to manufacture.

IMPORTANT:

There are two ways of drawing in orthographic -First Angle and Third Angle. They differ only in the
position of the plan, front and side views. Below is an example of First Angle projection.

Opposite is a simple L-shape, drawn in three dimensions. The front, side and plan views have drawn
around the 3D shape. However this is not the correct way of drawing them as they are not in the right
positions. The correct method of presenting the three views, in first angle orthographic projection is
shown below. The drawing is composed of a front, side and plan view of the L-shaped object. The first
drawing is the front view (drawn looking straight at the front of the L-shape), the second is a drawing
of the L-shape seen from the side (known as side view) and last of all a drawing from above known as
a plan view.
There d lines are faint guidelines and they are drawn to help keep each view in line, level and the same
size. Please Note! This is an example of first angle orthographic projection(as used mainly in Europe).
There is another type called third angle which is used by countries such as the USA. The front, side and
plan views are in different positions THE SIDE VIEW Imagine standing directly at the side of the L

shape.

THE FRONT VIEW Now imagine standing directly in front of the L-shape the drawing opposite shows

exactly what you would see.


THE PLAN VIEW The plan view is a view seen directly from above. Some people call this a birds eye

view.

Draw an orthographic projection of a H-shape. Clearly show the front, side and plan views and use
guidelines to keep them level. Carefully study the symbols shown below. Normally when drawing in
first or third angle projection a symbol is drawn underneath this clearly shows which angle of
projection has been used.

Another example of first angle orthographic projection is shown below. Follow the blue, red and
green guidelines as the front, side and plan view are constructed. The final arrangement of the views
is shown in the drawing below. Notice how the symbol for first angle orthographic projection has been
added and the paper has a title block and borderline.

You might also like