Scribd
Upload
212 views

Cad Assignment

This document contains 11 questions related to computer-aided design (CAD) and computer graphics assignments for a mechanical engineering course. The questions cover topics such as CAD software packages and workstations, advantages of CAD, comparing CAD and conventional design, CAD applications in engineering, CAD algorithms, CAD/CAM product cycles, computer applications in design, memory storage devices, CAD/CAM/CAE software, geometric transformations, developing transformation matrices, and applying transformations to graphics objects. Students are asked to define terms, explain concepts, perform calculations, and justify the use of CAD in engineering.

Uploaded by

Anonymous 5KGkE3V
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
212 views

Cad Assignment

This document contains 11 questions related to computer-aided design (CAD) and computer graphics assignments for a mechanical engineering course. The questions cover topics such as CAD software packages and workstations, advantages of CAD, comparing CAD and conventional design, CAD applications in engineering, CAD algorithms, CAD/CAM product cycles, computer applications in design, memory storage devices, CAD/CAM/CAE software, geometric transformations, developing transformation matrices, and applying transformations to graphics objects. Students are asked to define terms, explain concepts, perform calculations, and justify the use of CAD in engineering.

Uploaded by

Anonymous 5KGkE3V
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

LDRP INSTITUTE OF TECHNOLOGY & RESEARCH

Department of Mechanical Engineering, Semester 6th

Assignment 1: Fundamentals of CAD

Q.1 What are different software package used in CAD. Give specification of CAD work station.
Q.2 What are the advantages of CAD in design? Explain application of Computers to the design process.
Q.3 Define computer aided design. Compare computer aided design and conventional design with a neat
sketch/block diagram. State the different applications of CAD in an engineering field. Justify the
need of CAD in engineering area.
Q.4 State the different CAD software commercial available and explain the features of CAD software in
detail. (Any two software.)
Q.5 Explain DDA algorithm for generation of line. And Explain Bresenhams algorithm for generation
of line.
Q.6 Explain conventional product cycle AND product cycle with CAD/CAM.
Q.7 State & explain computer application in design.
Q.8 Explain Raster Scan Display and Vector Scan Display.
Q.9 State & describe Memory Storage Device.
Q.10 Give CAD, CAM & CAE software names.
Q.11 Generate a straight line connecting two points (21, 11) and (26, 15) using Bresenhams algorithm.
LDRP INSTITUTE OF TECHNOLOGY & RESEARCH
Department of Mechanical Engineering, Semester 6th

Assignment 2: Computer graphics

Q.1 What is Computer Graphics? Sate General application of computer Graphics.


Q.2 What is a geometric transformation? Define and explain the following With respect to 2-D
transformations (any three).
Q.3 Explain the following two-dimensional geometric transformation.
(i)Translation (ii) Rotation (iii) Scaling (iv) Reflection (v) Shear
Q.4 A triangle A (1, 1), B (7, 1) and C (4, 5) is to be translated such that the point X (4, 3) within
the triangle coincides with the origin after translation. Using the homogenous coordinate
system, determine the coordinates of the vertices for a translated triangle.
Q.5 A triangle ABC with vertices A (0, 0), B (60, 30), C (0, 30) is to be scaled by a factor of 2
about a point (60, 30) Determine new vertices of triangle.
Q.6 The composite transformation of the graphics element consist of the following operations:
(i) rotation about 45 about X-axis
(ii) translation through -10 and 10 units along X and Y direction respectively, and
(iii) Scaling by factors 0.5 and 2 in X and Y directions respectively.
Write the homogeneous transformation matrices for the above operations and develop the
composite matrix, if the operations are done in above sequence.
Q.7 The coordinates of three vertices of triangle ABC in working coordinate system (WCS) are:
A(3,2), B (7,2) and C(5,6) with reference to the model coordinates of the software, the
coordinates of origin of working coordinate system are (6,4). If the axes of WCS are at 30 in
CCW with respect to the axes of MCS, determine the coordinates of vertices of triangle ABC
in MCS.
Q.8 A triangle PQR with vertices P (2, 5), Q (6, 7) and R (2, 7) is to be reflected about line y=0.5x
+ 3. Determine
(i) The composite transformation matrix.
(ii) The coordinates of the vertices for a reflected triangle.
Q.9 A rectangle ABCD has vertices A(1,1), B(2,1) ,C(2,3) and D(1,3) . It has to be rotated by 300
CCW about point P (3,2). Determine (i) the composite transformations of matrix and (ii) the
new coordinates of rectangle.
Q.10 A triangle ABC with vertices A (30, 20), B (90, 20) and C (30, 80) is to be scaled by factor
0.5 about a point X (50, 40). Determine (i) the composition matrix and (ii) the coordinates of
the vertices for a scaled triangle.
Q.11 Reflect the diamond shape polygon whose vertices are A (-2, 0), B (0,-1), C (2, 0), D (0, 1)
about an arbitrary line L which is represented by equations y=0.5x+1.

You might also like