Scribd Logo
Upload

Welcome to Scribd!

  • 122 views

    P WPS

    Uploaded by

    Anilkumar G Nair
    This document provides details of a welding procedure specification for welding two pieces of 20mm thick S355 J0 steel in the flat position. The welding will be done using the gas metal arc welding process with a 1.2mm diameter filler wire over three runs at currents of 135, 121, and 121 amps respectively using direct current electrode positive polarity. Post weld heat treatment will involve heating and cooling the welded joint but no details are provided.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd

    P WPS

    Uploaded by

    Anilkumar G Nair
    122 views3 pages
    This document provides details of a welding procedure specification for welding two pieces of 20mm thick S355 J0 steel in the flat position. The welding will be done using the gas metal arc welding process with a 1.2mm diameter filler wire over three runs at currents of 135, 121, and 121 amps respectively using direct current electrode positive polarity. Post weld heat treatment will involve heating and cooling the welded joint but no details are provided.

    Original Description:

    format

    Original Title

    pWPS

    Copyright

    © © All Rights Reserved

    Available Formats

    XLSX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides details of a welding procedure specification for welding two pieces of 20mm thick S355 J0 steel in the flat position. The welding will be done using the gas metal arc welding process with a 1.2mm diameter filler wire over three runs at currents of 135, 121, and 121 amps respectively using direct current electrode positive polarity. Post weld heat treatment will involve heating and cooling the welded joint but no details are provided.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    122 views3 pages

    P WPS

    Uploaded by

    Anilkumar G Nair
    This document provides details of a welding procedure specification for welding two pieces of 20mm thick S355 J0 steel in the flat position. The welding will be done using the gas metal arc welding process with a 1.2mm diameter filler wire over three runs at currents of 135, 121, and 121 amps respectively using direct current electrode positive polarity. Post weld heat treatment will involve heating and cooling the welded joint but no details are provided.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    You are on page 1of 3

    Welding Procedure Specification: AEPPL/WPS/ Method of preparation and Cleaning:

    WPQR No: To be qualified Parent Material Designation:


    Manufacturer: Anand Engineering Products Material thickness (mm): 20mm
    Mode of metal transfer: Not Applicable Outside Diameter (mm): Not Applicable
    Joint Type and Weld Type: Welding Postion: PA
    Weld preparation details :

    Joint Design Welding Sequence

    Welding Details
    Size of
    Welding Current Voltage Type of
    Run Filler Wire Feed Speed
    Process A V current/Polarity
    Material

    1 135 1.2 DCEP


    2 121 3.15/3.2 DCEP
    3 121

    Filler material designation and make:


    Any special baking or drying: Other information
    Designation Gas/Flux -Shielding Weaving (Max width of run):
    -Backing Oscillation : Amplitude, frequency, dwell ti
    Gas flow rate: -Shielding Pulse welding details:
    -Backing Distance contact tube to work distance:
    Tungsten electrode type/Size: Plasma welding details:
    Details of back gouging/Backing: Torch angle:
    Preheat temperature:
    Interpass temperature:
    Post heating:
    Preheat maintenance temperature:
    Post weld heat treatment and/or Ageing:
    (Time, Temperature, Method:
    Heating and cooling rates):
    --------------------------------------------------------
    Manufacturer
    of preparation and Cleaning:
    aterial Designation: S355 J0
    thickness (mm): 20mm
    Diameter (mm): Not Applicable

    Sequence

    Run out length/


    Wire Feed Speed Heat Input
    Travel Speed

    (Max width of run):


    n : Amplitude, frequency, dwell time:
    ding details:
    contact tube to work distance:
    elding details:

    You might also like