Scribd
Upload
117 views

Ref

This document lists key references for codes, papers, theses, and standards relating to the non-destructive testing of masonry structures. It includes references for ASTM standards on testing masonry strength and deformability using the flat-jack method, British standards, Indian standards, papers on evaluating brick masonry through non-destructive methods and determining compressive strength, Ph.D theses on masonry mechanics, and RILEM recommendations for in-situ concrete strength determination and measuring rebound hardness and ultrasonic pulse velocity of masonry.

Uploaded by

Jatinder Bhatia
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
117 views

Ref

This document lists key references for codes, papers, theses, and standards relating to the non-destructive testing of masonry structures. It includes references for ASTM standards on testing masonry strength and deformability using the flat-jack method, British standards, Indian standards, papers on evaluating brick masonry through non-destructive methods and determining compressive strength, Ph.D theses on masonry mechanics, and RILEM recommendations for in-situ concrete strength determination and measuring rebound hardness and ultrasonic pulse velocity of masonry.

Uploaded by

Jatinder Bhatia
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

KEY REFERENCES - CODES

ASTM. 2001b . Standard test method for compressive strength of masonry prisms. Masonry test methods
and specifications for the building industry, ASTMC 1314-00a, 4th Ed., Philadelphia.

ASTM. 2001c . Standard test methods for sampling and testing brick and structural clay tile. Masonry test
methods and specifications for the building industry, ASTM-C67-00, 4th Ed., Philadelphia.

ASTM, In-situ compressive stress within solid unit masonry estimated using flat-jack measurements, ASTM
Standard C 1196-91, 1991

ASTM, Standard test method for In-Situ Measurement of Masonry Strength Using Flatjack Method, ASTM
Standard C1197-09, 1991

ASTM, Standard test method for In-Situ Measurement of Masonry Deformability Properties Using Flat jack
Method, ASTM Standard C1197-92, 1997
1
KEY REFERENCES - CODES

BS EN 1881 : Part 202, Recommendation for surface hardness testing by rebound hammer 1986.

BS EN 1881 : Part 203, Recommendation for measurement of velocity of ultrasonic pulses in concrete 1986.

BS EN 1052-1, "Methods of test for masonry - Part 1: Determination of compressive strength.," 1999.

BS EN 772-1, "Methods of test for masonry units - Part 1: Determination of compression strength," 2000.

BS EN 1996 1-2, "Eurocode 6 - Design of masonry structures - Part 1-2: General," CEN, Brussels, 2005.
KEY REFERENCES - CODES

IS 1905 : 1987, Indian standard code of practice for structural use of unreinforced masonry, 3rd Rev., Bureau
of Indian Standards, New Delhi, India.

IS 1077 : 1992, Indian standard Common Burnt Clay Building Bricks - Specification, 5th Rev., Bureau of
Indian Standards, New Delhi, India.

IS 3495 (Parts 1 to 4) : 1992, Indian standard Methods of Test of Burnt Clay Building Bricks, 3rd Rev.,
Bureau of Indian Standards, New Delhi, India.

IS 13311 (Part I) : 1992,Non-Destructive Testing of Concrete Methods of test(Ultrasonic Pulse Velocity)

IS 13311 (Part II) : 1992 Non-Destructive Testing of Concrete Methods of test(Rebound Hammer)
KEY REFERENCES - PAPERS

Atkinson, R. H., and Noland, J. L. 1983 . A proposed failure theory for brick masonry in compression. Proc.,
3rd Canadian Masonry Symp., Edmonton, Alta., Canada, 5.15.17.

Atkinson, R. H., and Noland, J. L : Evaluation of Brick masonry by non destructive methods. IABSE
reports 1983.

Atkinson, R. H., Noland, J. L and Schuller MP. A review of the flat-jack method for non destructive
evaluation Proc. Non-destructive evaluation of civil structures and materials, Boulder, USA, 1990

Dayaratnam, P. 1987 . Brick and reinforced brick structures, Oxford and IBH, New Delhi, India.

Jiri Brozovsky : Determine the Compressive Strength of Calcium Silicate Bricks by Combined NDT method.
Faculty of civil engineering, Brno University of Technology, 60200 Brno, Czech Republic.
4
KEY REFERENCES - PAPERS

H. B., Rai, D. C., and Jain, S. K. (2007a). Stress-strain characteristics of clay brick masonry under uniaxial
compression. J. Mater. Civ.Eng., 10.1061/(ASCE)0899-1561(2007)19:9(728), 728738.

H. B., Rai, D. C., and Jain, S. K. (2007b). Uniaxial compressive stress-strain model for clay brick masonry.
Curr. Sci., 92(4), 497501.

Jain, A. and Kathuria A. (2013). Combined Use of Non- Destructive Tests for Assessment of Strength of
Concrete in Structure. Procedia Engineering 54 (2013) 241 251.

Malhotra, V.M., Testing Hardened Concrete: Non-Destructive Methods. Iowa State University Press and
American Concrete Institute, 1976.

Marilyn Kaplan, Meade E : Non Destructive Evaluation Techniques for Masonry Construction.US
Department of Interior National Park Service/Heritage Preservation Services.
5
KEY REFERENCES Ph.D THESIS AND RILEM STDS
Fatima, G.D. and Vasconcelos, M. (2005). Experimental investigations on the mechanics of the stone
masonry. Universidade do Minho, Department of Civil Engineering.

Manning, E.C. (2016). Enhancement of the tube jack non destructive test method for historical structural
masonry diagnosis. Universidade do Minho, Department of Civil Engineering.

RILEM Recommendation, 43-CND. (1993). Combined non-destructive testing of concrete. Draft


recommendation for in situ concrete strength determination by combined non-destructive methods.
Materials and Structures, 26, pp.43-49

RILEM Recommendation, 127 MS MS.D.2 (2006). Determination of masonry Rebound hardness.

RILEM Recommendation, 127 MS MS.D.5 (2006). Measurement of Ultrasonic Pulse Velocity for masonry
units and Wallettes.

You might also like