Scribd
Upload
333 views2 pages

Mechanical Testing

Mechanical testing plays an important role in evaluating material properties, developing new materials, and quality control. Tension testing is commonly used to measure mechanical properties and provide basic design information on material strength. In a tension test, the stress-strain curve is recorded and key properties like ultimate tensile strength, yield strength, elastic modulus, and ductility measures can be determined. While ultimate tensile strength is not used in design of ductile structures, it is important for quality control and understanding material behavior and performance.

Uploaded by

gosaye desalegn
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
333 views2 pages

Mechanical Testing

Mechanical testing plays an important role in evaluating material properties, developing new materials, and quality control. Tension testing is commonly used to measure mechanical properties and provide basic design information on material strength. In a tension test, the stress-strain curve is recorded and key properties like ultimate tensile strength, yield strength, elastic modulus, and ductility measures can be determined. While ultimate tensile strength is not used in design of ductile structures, it is important for quality control and understanding material behavior and performance.

Uploaded by

gosaye desalegn
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Mechanical testing

Introduction

Mechanical testing plays an important role in:-

Evaluating fundamental properties of engineering materials


In developing new materials and
Controlling the quality of materials for use in design and construction.

For example:- If a material is to be used as part of an engineering structure that will be


subjected to a load, it is important to know that the material is strong enough and rigid enough to
withstand the loads that it will experience in service. As a result engineers have developed a
number of experimental techniques for mechanical testing of engineering materials subjected to
tension, compression, Fatigue, bending or torsion loading.

Tension test

Tensile strength is defined as a stress, which is measured as force per unit area.

The most common type of test used to measure the mechanical properties of a material is the
Tension Test.

Tension test is widely used to provide basic design information on the strength of materials.

The major parameters that describe the stress-strain curve obtained during the tension test are

the tensile strength (UTS),


yield strength or yield point (y),
elastic modulus (E),
percent elongation (L%) and
The reduction in area (RA%).

Some materials will break sharply, without plastic deformation, in what is called a brittle failure.
Others, which are more ductile, including most metals, will experience some plastic deformation
and possibly necking before fracture.

The UTS is usually found by performing a tensile test and recording the engineering stress
versus strain.

The highest point of the stress-strain curve is the UTS. It is an intensive property.

Tensile strengths are rarely used in the design of ductile members, but they are important in
brittle members. They are tabulated for common materials such as alloys, composite materials,
ceramics, plastics, and wood.
Tensile strength is defined as a stress, which is measured as force per unit area.

Concept

Many materials display linear elastic behavior, defined by a linear stress-strain relationship. For
many applications, plastic deformation is unacceptable, and is used as the design limitation.

The UTS is not used in the design of ductile static members because design practices dictate the
use of the yield stress. It is, however, used for quality control, because of the ease of testing. It is
also used to roughly determine material types for unknown samples.

Objective

Tension test is carried out; to obtain the stress-strain diagram, to determine the tensile properties
and hence to get valuable information about the mechanical behavior and the engineering
performance of the material.

You might also like