Scribd
Upload
172 views

Boot Loader Upgrade Procedures

The document outlines steps to upgrade the boot loader on a network device, including resetting the unit while connected to the console, running diagnostics tests, downloading a new boot loader file via TFTP, erasing and programming the new boot loader, and then resetting the box to load the new boot loader code.

Uploaded by

Muhammad Najmi
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
172 views

Boot Loader Upgrade Procedures

The document outlines steps to upgrade the boot loader on a network device, including resetting the unit while connected to the console, running diagnostics tests, downloading a new boot loader file via TFTP, erasing and programming the new boot loader, and then resetting the box to load the new boot loader code.

Uploaded by

Muhammad Najmi
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Boot loader upgrade procedures.

Reset unit while connected to Console.

Testing Memory

Booting...

Boot Version 1.0.0.2 Mar 13 2012, 14:44:22

Starting Diagnostics...

Starting...

Ethernet Routing Switch 3526T-PWR+

Reading MAC Address...

MAC Address: 70-30-18-A0-4D-00

Attaching SOC unit 0... PCI device ASIC attached as unit 0

ERS3500 Diagnostics 1.0.0.6 Apr 23 2012, 10:11:18

**Once Diagnostics starts Hit control-c to break routine.**

Test 111 DDRAM Walking 1/0s - PASSED

Test 112 DDRAM Byte/Word/Long - PASSED

Test 113 DDRAM Power-of-2 - PASSED

Test 121 ROM Config - PASSED

Test 151 FANs Status - PASSED

>> Break Recognized - Wait...

Press 'a' to run Agent code

Press 'd' to download agent/diag/bootloader code

Press 'e' to display Errors

Press 'i' to initialize config flash

Press 'p' to run POST tests

Press 'r' to reset the box...

Download Code to:

1 - Agent Version: 5.0.0.008

2 - Diagnostics

3 - Boot-Loader
Select [ <agent> ]: 3

1 - Download via TFTP

Select [ <tftp> ]:

Enter Filename []: 3500/ERS3500_b1_0_0_3.bin

Enter Server IP Address [255.255.255.255]:10.180.40.253

Enter Local IP Address [255.255.255.255]:10.180.40.120

Enter Subnet Mask [255.255.255.0]:255.255.255.0

*Default Gateway []: ** Will only show up if Local IP address is on different subnet of Server IP address

Enter Port (fp#) [ <1> ]:** can only choose one port

Wait...

TFTP: Sending Open: .aaaa

TFTP: Open

...............................................................

Len= 0x4CEA4= 315044. (@01000000)

Boot-Loader Version= 1.0.0.3 ModelMask= 0x3131

Program Y/N [ N ]: Y

Erasing - Wait 4 sec...

Programming - Wait 2 sec...

Press 'a' to run Agent code

Press 'd' to download agent/diag/bootloader code

Press 'e' to display Errors

Press 'i' to initialize config flash

Press 'p' to run POST tests

Press 'r' to reset the box...

You must reset the box to load up the new boot loader code

Reboot? (y/N) [ N ]:y

Rebooting...

Booting...

Boot Version 1.0.0.3 Oct 11 2012, 13:23:46

You might also like